Instruction/ maintenance manual of the product 8030C ritetemp
Go to page of 7
Operation 8030C Made in China Customer Support: 888-515-2585 or Visit our webiste w ww.ritetemp-thermostats.com 401-011 RESET MENU PROGRAM NOTE: Your thermostat comes from the factory calibrated to + or - 1 o F actual temperature. It is an accurate instrument.
Statement of use: The GPMG8030C can be used with most 24 volt gas, oil or electric heating and air conditioni ng systems, single-stage heat pumps or gas millivolt heating systems. It cannot be used with 120 volt heating systems or multistage heat pumps.
PG 3 PG 4 Set Day Touch this area to set the day of the week. Set Time Touch this area to set the time of day. Left arrow goes back, right arrow goes forward. Calibration indicator This comes on if you have altered the calibration of your unit Calibration Use this to calibrate your LCD display to match another thermometer.
1 Configure 2 Auto-run Press MENU to configure the thermostat (from HOME screen). Set day of the week - Touch the Day of the week area to cycle through the days of the week to select the current day. Set time of day - Touch the Time of Day arrows to move the time selection forward or backward until it displays the current time.
3 Program 3 Program cont. NOTE: 60 Second Rule-During programming, if a button is not pushed in 60 seconds, the unit will return to the home screen. Everyt hing you have changed while programming will automatically be saved. PG 7 PG 8 Press PROGRAM to go to the programming screen.
Manual cont. Manual TEMPORARY Overide - At the Manual override screen, Touch the Temp Up / Temp Down arrows to select your desired temporary Target Temperature. Touch HOME to return to operation. The TEMPORARY icon will go on indicating you have modified the Target Temp for the current Time Slot only (see PG7-Time Slot) .
4 Special Features 4 Spec. Featr. cont. Swing Swing setting determines the temperature difference from ON to OFF that the thermostat will command the HVAC system t o run. With the MODE switch in HEAT or COOL, press the MENU button. Touch the SWING icon and the current setting of temp swing is shown on the display (default at 3 ).
An important point after buying a device ritetemp 8030C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ritetemp 8030C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ritetemp 8030C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ritetemp 8030C you will learn all the available features of the product, as well as information on its operation. The information that you get ritetemp 8030C will certainly help you make a decision on the purchase.
If you already are a holder of ritetemp 8030C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ritetemp 8030C.
However, one of the most important roles played by the user manual is to help in solving problems with ritetemp 8030C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ritetemp 8030C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
