Instruction/ maintenance manual of the product 6030 ritetemp
Go to page of 9
MENU PROG HEAT COOL OFF FAN AUTO ON Operation 6030 ENGLISH.
Statement of use: The 6030 can be used with millivolt, 24VAC, single and 2 stage conventional systems, gas/oil/electric heat, 1 stage heat pumps, 2 stage heat pumps, zoned hot water (2 or 3 wire), zoned forced air, single and 2 stage cooling and hybrid systems.
AM PG 3 PG 4 Set Day Touch this area to set the day of the week. Set Time Touch this area to set the time of day. Left arrow goes back, right arrow goes forward. Calibration indicator This shows if you have altered the calibration of your unit Calibration control Use this to calibrate your LCD display match to another thermometer.
Configure Auto-run Press MENU to configure the thermostat (from HOME screen). Set day of the week - Touch the Day of the week area to cycle through the days of the week to select the current day. Set time of day - Touch the Time of Day arrows to move the time selection forward or backward until it displays the current time.
Program Program cont. NOTE: 60 Second Rule-During programming, if a button is not pushed in 60 seconds, the unit will return to the home screen. Everything you have changed while programming will automatically be saved. PG 7 PG 8 Select HEAT with the HEAT/Cool MODE switch.
Manual cont. Manual Temporary OVERRIDE - • At the Manual override screen, Touch the Temp Up / Temp Down arrows to select your desired temporary Target Temperature. • Touch HOME to return to operation. The OVERRIDE icon will go on indicating you have modified the Target Temp for the current Time Slot only (see PG7-Time Slot) .
Special Features Spec. Featr. cont. Swing Swing setting determines the temperature difference in degrees from ON to OFF that the thermostat will command the HVAC system to run. With the MODE switch in HEAT or COOL, press the MENU button. Touch the SWING icon and the current setting of temp swing is shown on the display (default at .
AM MENU PROG HEAT COOL OFF FAN AUTO ON P 14 P 13 If you have configured your 6030 for heat pump control the MENU screen will display an additional icon - the HEAT PUMP ON/OFF icon.
Made in China 1611-025 Calibration AM Customer Support: 877-505-2353 or Visit our website www.ritetemp-thermostats.com NOTE: Your thermostat comes from the factory calibrated to + or - 1 o F actual temperature.
An important point after buying a device ritetemp 6030 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ritetemp 6030 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ritetemp 6030 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ritetemp 6030 you will learn all the available features of the product, as well as information on its operation. The information that you get ritetemp 6030 will certainly help you make a decision on the purchase.
If you already are a holder of ritetemp 6030, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ritetemp 6030.
However, one of the most important roles played by the user manual is to help in solving problems with ritetemp 6030. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ritetemp 6030 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
