Instruction/ maintenance manual of the product CMD-9000 Audiovox
Go to page of 53
AUDIOVOX CDM-9000 T ri-Mode CDMA/AMPS Handheld Portable Cellular T elephone In today’ s fast paced world, it has become a necessity to have access to real-time information. Y our communications tools must provide you with this access from anywhere and anytime.
WRIST STRAP A TT ACHMENT Attach the wrist strap to the phone through the strap hole as shown below 1. Then pull the long loop through the smaller loop as shown below 2. BA TTER Y INST ALLA TION AND RECHARGING T o Attach the Battery Pack 1 . Insert the hook at the end of the Battery Pack into the slot at the end of the phone.
TO RECHARGE BA TTER Y Y our CDM-9000 has a built in charger function. T o re-char ge the Battery Pack, always install the Battery Pack to the phone. 1 . Attach the Battery pack to the Phone 2 . Insert the DC plug of the AC Adapter (CNR-4000) to the Desktop Holder (DTH-4000).
FUNCTIONS External View.
BASIC OPERA TION Placing Calls T o place a call: 1 . Enter the phone number .( a maximum of 32 digits will be displayed.) 2 . Press . The indicator will light. · T o Corr ect a Number Press to clear the last digit. Press and hold to erase all the digits entered.
+ Power Management BASIC OPERA TION Placing Calls T o place a call: 1 . Enter the phone number .( a maximum of 32 digits will be displayed.) 2 . Press . The indicator will light. T o T erminate a Call Press . The indicator will go out. Last Number Redial Press to recall the last number you dialed, then press .
See Phonebook Recall . T o Mute A Phone Conversation Press to mute your conversation at any time during a call. “ MUTE ” will be displayed. T o return to normal conversation, Press again. Speed Dialing If you know the phonebook address of the telephone number that you want to call, you may place a call without using .
When you dial one of the 3 pre-programmed emergency numbers, your phone will enter the Emergency Call Mode. In this mode, the phone will attempt to complete the emergency call using any available cellular system from which it can obtain service.
Simply press the or to adjust Earpiece V olume during a call. Scratch Pad Dialing If you enter a telephone number during a call, the number will be stored in the Scratch Pad memory . After terminating the call, the number you entered can be dialed by .
T one™ signals. See Link dialing for more information. T ouch T one™ fr om Display When Sending DTMF mode is on, the number will be sent in T ouch T one™ signals during a call as you press digit keys. When Sending DTMF mode is of f, you can send T ouch T one™ signals in the following manner .
T o Stor e a Number without Name 1 . Press , then enter the phone number . 2 . Press , then enter the desired memory address (01 through 99). Example: T o store the phone number 1 2 3 4 5 6 7 8 9 0 in address 07. 1 . Press . 2 . Enter . 3 . Press .. 4 .
4 . Enter . The number already stored is displayed momentarily . 5 . T wo seconds later . 6 . If you accept to overwrite, scroll to “ YES ” and Press . 7 . If you do not want to overwrite, scroll to “ NO ” and press . The screen returns to the step 3 again.
available memory address which will be indicated in the display . This feature can prevent the possible overwriting of a previously stored number . 1 . Enter the phone number . 2 . Press . Example: T o store the phone number 1 2 3 4 5 6 7 8 9 0 into a vacant memory address 04.
5 . Enter . 6 . Press . 7 . Enter and press . Note: Y ou can add a second number after storing a first number . See T o Enter a Second Number . T o Stor e a Name with the Phone Number T o use this procedure, you will need to refer to “ Alpha Mode ” below .
1 . Press , than enter the phone number . 2 . Press . 3 . Press digit key repeatedly to display the letter that you want. The following table shows which character is assigned with each digit key . For example, to enter the letter “D”, press once.
Y ou can choose one of 15 ring types for each phonebook address. With this feature, you will be able to distinguish who is calling by hearing the ringing tone. The ring type is selected while storing the number when the word “ OPTION ” appears. Example: T o store a number with Ring T ype #02 in the address 12.
Notes: 1. The submenu “PRI.CHANGE” will be available only when two telephone numbers are stored in that address. 2. The submenu “REPLA Y” will be available only when your voice is stored in that addr ess.
4 . Press . 5 . Press . Note: When the Alpha T ag is 2 lines long, only the Alpha T ag is displayed without the telephone number . However , a call can still be made by simply pressing . Phonebook Key W ord Search Mode This mode searches and displays the character string of Alpha T ags stored in the Phonebook.
· T o dial the primary number , just press . · T o dial the secondary number , press . T o Review Long Numbers This feature allows you to review all the digits of very long numbers or numbers stored with Alpha T ags. 1 . Use any of the previously described Phonebook search modes to recall a number .
T o Modify Alpha Name T ag Recall the number and proceed to “ MODIFY ” as above. Press , and the Name T ag will appear by itself. Press to clear the letter(s), and enter the new Name. T o Modify Address After you modified number/name, just press without entering new address, and the current phonebook address will be overwritten.
3 . Press . 4 . Enter 1 5 as a new address. T o Change Priority of Dual Numbers Y ou can interchange the primary and the secondary numbers in a phonebook address. The submenu “ PRI.CHANGE ” will only be available when two telephone numbers are stored in that address.
1 . Press 2 . Enter . 3 . Press , . 4 . Press and scroll to “ SECRET ”. 5 . Press . 6 . Press to put a mark “ ” on the number to be secret. 7 . Press . 8 . Enter and press to store it. T o Recall a Secr et Number Example: T o recall the number 1 2 3 4 5 6 7 8 9 0 stored in the address 30.
Example: T o link 3 numbers and store in Address 35. 1 . Enter . 2 . Press . 3 . Press . 4 . Enter . 5 . Press . 6 . Press . 7 . Enter . 8 . Press . Note: While entering a linked number , you may r eview all the parts of that number , even those alr eady enter ed.
1 . Enter the telephone number (1 2 3 4 5 6 7 8 9 0). 2 . Press . 3 . Press . 4 . After you hear the voice prompt, “ Name, please ”, speak “Katie” into the microphone of the handset. Y ou will hear “Katie” repeated from the handset again. 5 .
6 . Press and go to the step 4 of V oice Registration. Note: In case dual numbers or linked numbers are stored in the phonebook, the primary number of the first number can be dialed using V AD. T o Delete the Register ed Name 1 . Press to recall the number from the phonebook.
By Scrolling 1 . Press and scroll to “ HISTORY ”. 2 . Press and scroll to the menu item you want. 3 . Press T to select. 4 . T o review the numbers in memory , scroll with or . 5 . After a number is displayed, it can be easily dialed, by simply pressing .
T o Review Scratch Pad Example: 1 . Press . 2 . Scroll with or to review other number . 3 . Y ou can place a call by simply pressing . T o Save a Number to Phonebook The numbers of Call History and Scratch Pad Memory can be stored in your phonebook. Y ou can add a name in the same way as “ MODIFY ”.
3 . Scroll the page by or . 4 . Press or to select the menu option in the bottom line of the display . 5 . T o return to the previous page, press . 6 . T o terminate the network access, press . The “ ” will go out. Y ou can still browse the cached information.
Symbol Mode MESSAGING FEA TURES Y our CDM-9000 Audiovox Cellular T elephone has been engineered to operate with the latest technology that will allow you to enjoy the benefit of V oice Mail Notification and T ext Messages. Please note that operation of these features depends on the Cellular System and therefore may not be available in all areas.
with animation. 3 . The Phone’ s Memory Stack is updated as to the number of unreviewed messages in your V oice Mail. V oice Mail Notification with Mail Retrieval Service (MRS) 1 .
3 . The succeeding numbers can be sent sequentially by pressing . T o Review the V oice Mail Access Number 1 . Press to select the Phonebook Address Mode. 2 . Press . The first linked number in will be displayed. 3 . Press (one or more times) to display the remaining linked numbers in .
Function Menu T o Access Function Menu V arious phone settings can be changed through Function Menu to customize your phone’ s functions to fit your conve- nience. See Function Menu T ree below . Y ou can reach the Function you want to access in two ways; Scroll and Short- cut.
Function Menu T ree.
Lock Features Security Code and Unlock Code Y our phone is equipped with the Security Code and the Unlock Code to access various security features. Y ou may change the preset codes for added protection. When “ SECURITY CODE: ” is displayed, you need to enter your four-digit security code.
Phone Lock (F12) This mode is useful to prevent unauthorized use of the phone. W ith this feature on, the following functions are still available. · Incoming calls can be answered with . · Any Key Answering · Programmed Emergency Call · OneT ouch Emergency Call · Turning off the phone by .
Own T elephone Number Display (F21) This feature enables you to display your own telephone number and the ID number (SID) of your “Home” Cellular System. Press . Backlight Control (Standby) (F22-1) The LCD display and keypad are backlighted automatically after Power-On.
3 . Press to set. SMS T ext Lines Selection (F24) Y ou can select to have T ext Messages displayed in either 3 or 4 lines. 1 . Press . 2 . Scroll with or “ 3LINES ” or “ 4LINES ”. 3 . Press to set. Contrast Control (F25) The LCD display contrast can be adjusted in 7 steps for your best condition.
1 . Press . 2 . Keep pressing or until you get the desired sound level, or “silent” mode. Note: In “silent” alert mode, alert tone is not given for an incoming call. However , if Automatic Answering feature is ON, alert tone is given with the lowest available volume.
Setting T ones (F36) This is a group of 9 functions related to the setting of tones. Key T one Length (F36-1) This feature selects the duration of the tone length when a key is pressed. 1 . Press and . 2 . Y ou can change the current mode by or . 3 . Press to set.
This feature audibly alerts you when a Caller ID is received. 1 . Press and . 2 . Y ou can turn this feature on/off by or . 3 . Press to set. Service Mode Alert (F36-6) W ith this feature on, an audible tone alerts you when the service mode changes from Digital to Analog, or vice versa.
Call Timers T o help you manage your calls, your phone is equipped with several Call T imers. Last Call Timer (F41-1) 1 . Press . The talk time of the last call will be displayed. 2 . Press to exit. Outgoing Call Timer (F41-2) 1 . Press and . The cumulative talk time of all outgoing calls will be displayed.
2 . Y ou can turn this feature on/off by or . 3 . Press to set. Clock Adjustment (F43) Y ou can use your clock in AUTO or MANUAL mode. In AUTO mode, your clock synchronizes to the base time of the CDMA system and displays the local time of the area where you are, while the “ D ” indicator is on.
power on. 3. The clock alarm may not ring in AUTO mode, if you skip the alarm time traveling into an area with different local time. 4. In place of the alarm sound, you can use V ibrator Alert (F8) . Countdown Timer (F45) This feature alerts you when the countdown timer expires.
Y ou can place or receive calls only within your home area or home affiliated area. · A-ONLY – A-System Only Mode The phone will scan the A-system only and prevents switching over to the B-system. · B-ONLY – B-System Only Mode The phone will scan the B-systems only .
System Settings (F54) This is a group of several functions for settings related to the system. NAM Name Displays (F54-1) Y ou can program a greeting or a name of a maximum 10 to 12 characters in the second line of your LCD display . This will be displayed when the phone is turned on or when you change the NAM.
, and press . 3 . When the phone is operating in the Enhanced Privacy Mode, “ VP ” appears in the upper line of the display during talking. 4 . T o request the cellular system not to use the enhanced voice privacy service, select “ ST ANDARD ” with or , and press .
1 . Press and . 2 . Y ou can turn this feature on/off by or . 3 . Press to set. T o Pr ogram of Change your Automatic PIN (F54-6) 1 . Press and . 2 . Enter the four-digit security code and press .
T o Change Emergency Numbers (F62) Y ou can program your own emergency numbers. Up to 3 numbers of maximum 32 digits can be stored. 1 . Press . 2 . Enter the four-digit security code and press . 3 . Press or to select the emergency number memory location (1, 2, or 3) that you want to change or program, and press .
Reset Functions (F65) This is a group of several functions for Function/Memory Reset. Call Timer Reset (F65-1) This feature resets all the following three Cal T imers; Last Call T imer, Outgoing Call T imer and All Calls T imer . 1 . Press . 2 . Enter the four-digit security code and press .
This feature permits you to reset the User-Programmable functions to their initial settings. 1 . Press . 2 . Enter the four-digit security code and press . 3 . Press 4 . Press to reset. Data Communications Data/Fax Mode (F71) Y our CDM-4500 will work as a wireless modem, if connected to a PC with the optional data cable (DIC-4000).
The W eb Idle T imer will automatically terminate the access when your phone is left untouched for the programmed time. Press and to set. W eb IP Address 1 & 2 (F72-4) (F72-5) Y our phone can have up to 4 sets of the server IP (Internet Protocol) addresses and Port Numbers to access your service provider ’ s website.
Press to start the W eb Browser . Vibrator Alert 1 . T o turn the vibrator alert on, press , then scroll to “ ON ”. Press to select. 2 . T o turn the vibrator alert off, press , then scroll to “ OFF ”. Press to select. Notes: 1. When the V ibrator Alert featur e is on, the audible ringer/melody will be muted.
Function Reset Status The following functions will return to the initial settings after Function Reset. Functions Initial Setting Automatic Lock (F13) O F F Backlight Control (Standby) (F22-1) Portabl.
An important point after buying a device Audiovox CMD-9000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox CMD-9000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox CMD-9000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox CMD-9000 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox CMD-9000 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox CMD-9000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox CMD-9000.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox CMD-9000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox CMD-9000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
