Instruction/ maintenance manual of the product TS2400 RIDGID
Go to page of 12
1 This work stand has been engineered and manufactur ed to our high standard for dependability , ease of operation and operator safety . When properly cared for , the work stand will give you years of rugged, tr ouble-free performance.
2 T ABLE OF CONTENTS Y our work stand has many features for making the use of this product mor e pleasant and enjoyable. Safety , performance, and dependability have been given top priority in the design of this product making it easy to maintain and operate.
3 RULES FOR SAFE OPERA TION Safe operation of this accessory r equires that you read and understand this operator's manual, the operator’ s manual for the table saw and miter saw as well as all labels affixed to the tool. READ ALL INSTRUCTIONS n KNOW YOUR ACCESSOR Y .
4 SYMBOLS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger .
5 UNP ACKING LOOSE P AR TS The following items are included: n Stand Assembly (1) n Lower Foot (1) n Hex Bolt, 6 mm x 41 mm (2) n Curved W ashers, 6 mm (4) n Lock Nut, 6 mm (2) n Carriage Bolt, 1/4 in.-20 x 3 in. (4) n Lockwasher , 1/4 in. (4) n Wing Nut, 1/4 in.
6 ASSEMBL Y ASSEMBLING THE LOWER FOOT See Figure 1. NOTE : Only ONE spring pin is requir ed at the carry handle end of the stand. This spring pin locks the legs in the set-up or tear -down position. Instructions to change the location of this spring pin are described later in the “Assembly” section of this manual.
7 n At the wheel end of the stand firmly grab the lift handle and with the other hand pull the spring pin knob near the right front wheel. CAUTION: Do not lift by any part of the miter saw that is attached to the workstand. Failure to do so may result in possible injury and damage the tool.
8 ASSEMBL Y WORK STAND FOLD DOWN See Figures 8, 9, 10 and 11. Before you start n Remove any workpieces fr om the tool. n If the tool is already assembled to the stand, make sure that it is securely attached to the stand per the instructions in this manual.
9 ASSEMBL Y MOUNTING POWER TOOLS WARNING: Failure to unplug the tool could result in accidental starting causing possible serious personal injury . Before you start RIDGID TS2400 table saw bolts dir ectly onto this work stand. Most other tools, including miter saws, will need additional supports to aid in attaching a tool to work stand.
10 ASSEMBL Y n Remove mounting blocks fr om table. Attach power tool to mounting blocks with 1/4-20 carriage bolts, washers, lockwashers and nuts as shown. Reinstall mounting blocks to work stand table. NOTE: See views of bolt recommendations, see figur e 15.
11 EXPLODED VIEW/REP AIR P AR TS W ork-N-Haul IT TM T wo Wheel W ork Stand Model AC9930 RIDGID parts are at www .ridgidparts.com 17 2 4 5 19 7 9 10 1 1 12 1 8 3 15 6 14 13 30 18 22 25 27 26 16 24 28 2.
12 Customer Service Information: For parts or service, contact your nearest RIDGID authorized service center . Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www .
An important point after buying a device RIDGID TS2400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought RIDGID TS2400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data RIDGID TS2400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, RIDGID TS2400 you will learn all the available features of the product, as well as information on its operation. The information that you get RIDGID TS2400 will certainly help you make a decision on the purchase.
If you already are a holder of RIDGID TS2400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime RIDGID TS2400.
However, one of the most important roles played by the user manual is to help in solving problems with RIDGID TS2400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device RIDGID TS2400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
