Instruction/ maintenance manual of the product R82320 RIDGID
Go to page of 16
1 Y our impact driver has been engineer ed and manufactured to our high standar ds for dependability , ease of operation, and operator safety . When properly car ed for , it will give you years of rugged, trouble-free performance.
2 n Introduction ..................................................................................................................................................................... 2 n General Safety Rules ...........................................
3 GENERAL SAFETY RULES WARNING! RE AD AN D UN DER ST AND ALL INST RU CT ION S. Failure to follow all instructions listed below , may r esul t in elect ric sho ck, fir e and /or ser ious person al injury . SA VE THESE INSTRUCTIONS WORK AREA n Keep your work area clean and well lit.
4 SERVICE n Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury. GENERAL SAFETY RULES n When servicing a tool, use only identical replacement parts.
5 SAFETY RULES FOR CHARGER WARNING! RE AD AN D UN DER ST AND ALL INST RU CT ION S. Failure to follow all instructions listed below , may r esul t in elec tri c shock , fir e and /or seriou s pers ona l injury .
6 SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Pr oper interpr eta- tion of these symbols will allow you to operate the tool better and safer .
7 SYMBOLS The following signal words and meanings ar e intended to explain the levels of risk associated with this product. Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury . Indicates a p otentially hazardous situation, which, if not avoided, could result in death or serious injury .
8 CHARGER FEA TURES PRODUCT SPECIFICA TIONS Motor ................................................................................................................................................................... 14.4 V olt DC Switch.................
9 FEA TURES KNOW YOUR IMP ACT DRIVER See Figure 1. Before attempting to use this product, familiarize yourself with all operating features and safety rules.
10 OPERA TION Fig. 2 WARNING: Do not allow familiarity with your tool to make you careless. Remember that a careless fraction of a second is sufficient to inflict sever e injury . WARNING: Always wear safety goggles or safety glasses with side shields when operating tools.
11 OPERA TION OPERA TION Ready to char ge battery pack When batter y pack reac hes cooled temperature, charger begins fast char ge mode W h e n b a t t e r y p a c k r e a c h e s warmed temperature, .
12 OPERA TION INST ALLING BITS See Figure 4. n Lock the switch trigger on the driv er by placing the direc- tion of rotation (forward-reverse) selector in center lock position. n Remove the battery pack from the driver. n Pull the coupler away from the driver (1).
13 OPERA TION SWITCH TRIGGER See Figure 7. n To turn your driver ON , depress the switch trigger. To turn it OFF , release the switch trigger. V ARIABLE SPEED See Figure 7. This tool has a variable speed switch that delivers higher speed and tor que with increased trigger pr essure.
14 MAINTENANCE WARNING: W h e n s e r v i c i n g u s e o n l y i d e n t i c a l R I D G I D replacement parts. Use of any other parts may create a hazar d or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust.
15 W ARRANTY Proof of pur chase must be presented when requesting war - ranty service. Limited to RIDGID ® hand held and stationary power tools purchased 2/1/04 and after . This product is manufactured by One W orld T echnologies, Inc. The trademark is licensed from RIDGID, Inc.
16 983000-576 3-24-06 (REV :01) Customer Service Information: For parts or service, contact your nearest RIDGID authorized service center . Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www .
An important point after buying a device RIDGID R82320 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought RIDGID R82320 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data RIDGID R82320 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, RIDGID R82320 you will learn all the available features of the product, as well as information on its operation. The information that you get RIDGID R82320 will certainly help you make a decision on the purchase.
If you already are a holder of RIDGID R82320, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime RIDGID R82320.
However, one of the most important roles played by the user manual is to help in solving problems with RIDGID R82320. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device RIDGID R82320 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
