Instruction/ maintenance manual of the product R6000 RIDGID
Go to page of 14
1 Y our drywall screwdriver has been engineer ed and manufactured to our high standar d for dependability , ease of operation, and operator safety . When properly car ed for , it will give you years of rugged, trouble-free performance.
2 3 n Introduction ...................................................................................................................................................................... 2 n General Safety Rules ........................................
2 3 GENERAL SAFETY RULES WARNING: Read and understand all instructions. Failure to follow all instructions listed below , may result in electric shock, fire and/or serious personal injury . SA VE THESE INSTRUCTIONS WORK AREA n Keep your work area clean and well lit.
4 5 n Hold tool by insulated gripping surfaces when per- forming an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the cutting tool “live” and shock the operator.
4 5 SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer .
6 7 SYMBOLS The following signal words and meanings ar e intended to explain the levels of risk associated with this product. Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury . Indicates a potentially hazard ous situation, which, if not avoided, could result in death or serious injury .
6 7 DOUBLE INSULA TION Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual thr ee-wire grounded power cord. All exposed metal parts ar e isolated from the internal metal motor components with protect- ing insulation.
8 9 FEA TURES Fig. 1 ADJUST ABLE NOSEPIECE PRODUCT SPECIFICA TIONS Bit Shank .................................................................. 1/4 in. Switch......................................................... Variable Speed No Load Speed ......
8 9 UNP ACKING This product has been shipped completely assembled. n Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. n Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
10 11 OPERA TION WARNING: Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict sever e injury . WARNING: Alwa ys wear saf ety goggl es or safet y glasse s with side shields when operating tools.
10 11 OPERA TION SETTING DEPTH See Figure 5. The adjus tabl e nose piec e of your tool will automa tica lly drive scr ews to pre set depths. It may be helpful to begi n each new job by driving several test scr ews in scrap material to check and adjust the depth setting.
12 13 MAINTENANCE WARNING: W h e n s e r v i c i n g u s e o n l y i d e n t i c a l R I D G I D replacement parts. Use of any other parts may create a hazar d or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust.
12 13 W ARRANTY Proof of pur chase must be pr esented when requesting war - ranty service. Limited to RIDGID ® hand held and stationary power tools purchased 2/1/04 and after . This pr oduct is manufactur ed by One W orld T echnologies, Inc. The trademark is licensed from RIDGID, Inc.
14 983000-399 7-04 Customer Service Information: For parts or service, contact your nearest RIDGID authorized service center . Be sure to pr ovide all relevant information when you call or visit. For the location of the authorized service center near est you, please call 1-866-539-1710 or visit us online at www .
An important point after buying a device RIDGID R6000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought RIDGID R6000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data RIDGID R6000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, RIDGID R6000 you will learn all the available features of the product, as well as information on its operation. The information that you get RIDGID R6000 will certainly help you make a decision on the purchase.
If you already are a holder of RIDGID R6000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime RIDGID R6000.
However, one of the most important roles played by the user manual is to help in solving problems with RIDGID R6000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device RIDGID R6000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
