Instruction/ maintenance manual of the product R5013 RIDGID
Go to page of 18
1 Y our hammer drill ha s been engineered and manufactured to our high standard for dependability , ease of operation, and operator safety . When pr operly cared for , it will give you years of rugged, trouble-fr ee performance.
2 Introduction ...................................................................................................................................................................... 2 General Safety Rules ......................................
3 GENERAL SAFETY RULES WARNING: Read all instructions. F a i l u re t o f o l l o w a l l instructions listed below may r esult in electric shock, fire and/or serious injury . The term “power tool” in all of the warnings listed below r efers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
4 GENERAL SAFETY RULES W ear ear pr otectors with impact drills. Exposure to noise can cause hearing loss. Use auxiliary handles supplied with the tool.
5 SYMBOLS Some of the following symbols may be used on this product. Please study them and lear n their meaning. Proper interpretation of these symbols will allow you to operate the pr oduct better and safer .
6 SYMBOLS SERVICE Servicing requir es extreme car e and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to your nearest AUTHORIZED SER VICE CENTER for r epair . When servic- ing, use only identical replacement parts.
7 DOUBLE INSULA TION Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual three-wire grounded power cor d. All exposed metal parts ar e isolated from the internal metal motor components with protect- ing insulation.
8 Fig. 1 FEA TURES PRODUCT SPECIFICA TIONS Chuck Capacity ......................................................... 1/2 in. Input ........................................ 120 V , 60 Hz, AC only , 7.5 A Switch ..........................................
9 KNOW YOUR HAMMER DRILL See Figure 1. The safe use of this product requir es an understanding of the information on the tool and in this operator’ s manual as wel l as a know led ge of the pro jec t y ou ar e attem ptin g. Befo r e use of this product, familiarize yourself with all operating features and safety rules.
10 WARNING: Do not allow familiarity with products to make you careless. Remember that a careless fraction of a second is sufficient to inflict sever e injury . WARNING: Always wear safety goggles or safety glasses with sid e s hie lds wh en o per at ing pr oduct s.
11 OPERA TION RIGHT Fig. 4 WRONG Fig. 5 DRILL BIT TO TIGHTEN CHUCK JA WS TO INST ALL BITS See Figures 4 - 5 Unplug the drill. Insert the chuck key and twist counterclockwise. Ope n or clo se t he c hu ck j aw s to a poin t whe r e the o pe ni ng is slightly lar ger than the bit size you intend to use.
12 OPERA TION DEPTH STOP ROD Fig. 6 Fig. 7 DRILL BIT TO DECREASE DRILLING DEPTH AUXILIARY HANDLE ASSEMBL Y TO INCREASE DRILLING DEPTH DRILLING DEPTH AUXILIARY HANDLE ASSEMBL Y TO TIGHTEN TO LOOSEN 360° ROT A TION DEPRESS HERE TO ADJUST DEPTH STOP ROD USING THE AUXILIAR Y HANDLE ASSEMBL Y See Figures 6 - 7.
13 OPERA TION SELECTING HAMMER MODE OR DRILLING MODE See Figure 8. T o adjust for type of drilling, slide the selector on top of the motor housing to hammer mode or drilling mode. The ham- mer mode symbol is on the right and the drill bit symbol is on the left.
14 OPERA TION WARNING: Before connecting the drill to a power supply sour ce, always check to be sur e it is not in lock-on position (depress and release the switch trigger). Failure to ensure that it is not locked-on could result in accidental starting of the drill resulting in possible serious injury .
15 OPERA TION MET AL DRILLING� For maximum performance, use high speed steel bits for metal or steel drilling. Select normal drilling mode. Begin drilling at a very low speed to prevent the bit from slipping off the starting point.� Maintain a speed and pressure which allows cutting without overheating the bit.
16 MAINTENANCE CHUCK REMOV AL See Figures 11 - 13. The chuck may be removed and r eplaced with a new one. Unplug the drill. Open chuck jaws using the provided chuck key . Insert a 5/16 inch or lar ger hex key into the chuck of the drill and tighten the chuck jaws securely .
17 W ARRANTY Pro of of pu rc ha se m u st b e p res en te d wh en req ue st in g warranty service. Limited to RIDGID ® hand held and stationary power tools purchased 2/1/04 and after . This product is manufactured by One W orld T echnologies, Inc. The trademark is licensed from RIDGID, Inc.
18 OPERA TOR’S MANUAL 1/2 in. HAMMER DRILL DOUBLE INSULA TED R5013 Customer Service Information: For parts or service, contact your nearest RIDGID authorized service center .
An important point after buying a device RIDGID R5013 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought RIDGID R5013 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data RIDGID R5013 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, RIDGID R5013 you will learn all the available features of the product, as well as information on its operation. The information that you get RIDGID R5013 will certainly help you make a decision on the purchase.
If you already are a holder of RIDGID R5013, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime RIDGID R5013.
However, one of the most important roles played by the user manual is to help in solving problems with RIDGID R5013. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device RIDGID R5013 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
