Instruction/ maintenance manual of the product RDC-7 Ricoh
Go to page of 128
Im ag e C ap t u r i ng D evic e Operation Manual To ensure correct use of your digital camera, read this manual carefully before use. Keep the manual handy for future reference.
Introduction Thank you for purchasing a Ricoh digital camera. This manual explains the correct handling procedures and precautions for your camera. To ensure the best performance, please read the manual thoroughly before using the camera. Keep the manual handy for quick future reference.
1 Camera Features .................................................................................. 4 Parts & Names ...................................................................................... 5 Explanation of Information Displays .....
2 Special Shooting Functions ................................................................ 49 Text Shooting (Text Mode) .................................................................. 49 Sound Recording (Sound Mode) .............................
3 Chapter 5 SETTINGS/MISCELLANEOUS Transferring Images to a PC .............................................................. 96 Changing Camera Settings ................................................................. 98 Formatting a Card/Internal Memory .
4 Camera Features ● 3,340,000-pixel resolution compact camera With a 3,340,000-pixel resolution CCD, the compact camera produces high quality, high-resolution images (2048 × 1536). ● Compact camera The camera is so light you can carry it with you anywhere.
5 Parts & Names ■ Camera Body Front Back Microphone Flash AF viewfinder window Lens Sub Shutter button LCD Panel ...P.10 LCD Monitor ...P.9 Self timer lamp Shutter Release Button Button ...P.43 Button ...P.53 Button ...P.42 Button ...P.59 Tripod Screw Hole Speaker Wrist Strap Eyelet .
6 Operation ■ Battery ■ AC Adapter (optional) • AC-3 (120V – 240V) ■ SmartMedia Memory ■ Remote Control Unit Card (optional) (optional) • DR-3 RELE ASE ERASE FW D PROGR AM EV MULTI REV E.
7 Explanation of Information Displays The LCD monitor or the LCD panel displays symbols and figures showing the status of your camera, such as the battery level, the number of pictures that can be taken, and the mode settings.
8 Note • All items of information are shown for illustration purposes. During actual camera operation, only the relevant items are displayed. • File names are used when submitting to digital printing services, etc.
9 Error Message Explanation and Remedy Reference Page The SmartMedia memory card is unformatted. Format the card with the camera before using it. Format the internal memory before using it. A SmartMedia memory card of this type is not supported by this camera.
10 LCD Panel ■ Information Displays Recording Mode Displays Play/Erase Mode Displays q Recording Destination/Playback Source: • → (p.42, 76) w Recording Data Indicator (for recording): Displays the remaining number of pictures and remaining recording time e Self-Timer: → (p.
11 Basic Operation/Quick Reference This section provides introductory information for operating the RDC-7 digital camera. Further details can be found in the reference pages mentioned below. Preparations Powering the Camera → (p.22-26) q Load the battery into the camera.
12 Shooting q Turn the power switch on and set the mode dial to [SET]. w Press the or button to select [DATE SETTING]. e Press the DISPLAY button to select the display method. r Press the ENTER button. t Press the or button to change the flashing digit.
13 Playback Changing the Flash Mode → (p.53-55) q Set the mode dial to [ ] or [ ]. w Press the button to select a flash mode. You can choose Flash Off ( ), Auto ( ), Forced Flash ( ), or Slow Synchro mode ( blinks). The mark for the selected mode will be displayed on the LCD monitor or on the LCD panel.
14 Erasing Erasing Files → (p.92-94) q Set the mode dial to [ ]. w Press the button to select the erase source. e Press the [ ] button. r Press the or button to select the erase mode and press the ENTER button. * Remember that files cannot be restored once they are erased.
15 R Warning R Caution o m Safety Precautions Warning Symbols Various symbols are used throughout this instruction manual and on the product to prevent physical harm to you or other people and damage to property. The symbols and their meanings are explained below.
16 R Warning ● Turn off the power immediately if any metallic object, water, liquid or other foreign object gets into the equipment. Remove the batteries as soon as possible, being careful to avoid electric shocks or burns.
17 R Warning ● Keep the battery used in this equipment out of the reach of children to prevent accidental ingestion of harmful substances. Consumption of battery fluid is extremely harmful to human beings. If swallowed, seek immediate medical assistance.
18 R Warning m ● Do not use the equipment near flammable gases, gasoline, benzine, thinner or similar substances to avoid the risk of explosion, fire or burns. ● Do not use the equipment in aircraft or other locations where usage is restricted or prohibited as this may lead to disasters or accidents.
19 Observe the following precautions to ensure safe use of this unit. R Caution ● Contact with fluid leaking from a battery can lead to burns. If part of your body comes in contact with a damaged battery, wash the area with water immediately. (Do not use soap.
20.
Chapter Before Using the Camera ........................ 22 Checking the Package Contents .................. 22 Installing the strap and lens cap ................... 22 Powering the Camera .............................. 23 Charging the Battery .......
22 Before Using the Camera Checking the Package Contents Check that your digital camera comes complete with all the accessories listed below. Read the warranty card and keep it in a safe place. • Digital camera ......................................
23 Getting Started 1 Powering the Camera This section explains how to load and charge the battery, and how to connect the AC adapter to power the camera from a household electrical outlet.
24 Loading the Battery Load the battery (rechargeable lithium ion battery) before operating the camera. Important Note • Before using the camera for the first time, be sure to charge the battery. (The battery leaves the factory in an uncharged state.
25 Getting Started 1 Tips to Extend Recording and Playback Times * The battery life indicated on the previous page tends to decrease depending on the ambient temperature. In a cold environment, warming the battery by hand, for example, may allow you to take more pictures.
26 Using an AC Adapter When using the camera for long periods of time to record or playback images, connect an AC adapter (optional) to the camera and power the camera from a household electrical source. Using the AD Adapter Before using the AC adapter, be sure to read the safety precautions in the accompanying manual.
27 Getting Started 1 SmartMedia Memory Cards This section explains the types and usage of SmartMedia memory cards. What is a SmartMedia Memory Card? Files are recorded as data on the SmartMedia memory card in your camera.
28 • Keep the contact surface of the SmartMedia memory card clean and free from dust and foreign matter. Should the contact surface get dirty, wipe it clean with a soft, dry cloth. • Keep the SmartMedia memory card slot free from dust and foreign matter.
29 Getting Started 1 w Insert the SmartMedia memory card into the card insert slot and close the card door. Push the SmartMedia memory card fully into position, with the contact surface facing down. Note • Insert the SmartMedia memory card in the correct direction.
30 How to Use the Mode Dial The camera offers a number of recording and playback modes. Select the desired mode with the mode dial. • Still picture mode : This mode is used for normal shooting. • Sound mode : This mode is used for recording sound.
31 Getting Started 1 FORMAT SET 1/3 SERIAL TRANSFER LCD CONFIRMATION 1SEC. AUTO POWER OFF 1MIN SELECT: CHANGE: SEL.:ENTER KEEP SETTINGS IMAGE WITH SOUND OFF SHOOTING MODE 1/3 FOCUS AF REDEYE REDUCTION OFF ISO SENSITIVITY AUTO BACK:MENU SELECT: CHANGE: SEL.
32 FORMAT SET 1/3 SERIAL TRANSFER LCD CONFIRMATION 1SEC. AUTO POWER OFF 1MIN SELECT: CHANGE: SEL.:ENTER KEEP SETTINGS BEEP SOUND ON SET 2/3 POWER SAVE MODE OFF DATE SETTING 2000/ 6/15 VIDEO OUT MODE NTSC SELECT: CHANGE: SEL.:ENTER SEQUENTIAL NO. OFF LANGUAGE ENGLISH SET 3/3 INITIALIZE SETTING SELECT: CHANGE: SEL.
33 Getting Started 1 ● Record Menu ● Play Menu ● Erase Menu * Protected files cannot be erased. IMAGE WITH SOUND : Records with sound in (still picture) and (text) modes. → (p.52) FOCUS : Switches between auto focus and manual focus. → (p.62) FLASH STRENGTH : Selects the level of strength of the flash.
34 BEEP SOUND ON SET 2/3 POWER SAVE MODE OFF DATE SETTING 2000/ 6/15 VIDEO OUT MODE NTSC SELECT: CHANGE: SEL.:ENTER SEQUENTIAL NO. OFF 2000/ 1/ 1 SELECT: BACK:CANCEL SEL.:ENTER DATE SETTING Setting the Date and Time The set date and time are recorded when you shoot a picture.
35 Getting Started 1 2000/ 6/ 1 SELECT: BACK:CANCEL SEL.:ENTER DATE SETTING 10 : 15 SELECT: BACK:CANCEL SEL.:ENTER DATE SETTING y Press the or button to highlight the digit you wish to change.
36 How to Hold the Camera Unintentional movement of the camera during shooting will result in blurred images. To avoid such so-called “ camera shake ” , hold the camera as described below. Be particularly careful to avoid camera shake with telephoto zoom shots.
37 Getting Started 1 Important Note • Keeping your finger away from the shutter button and then pressing the shutter button in one go may result in a blurred image. • Do not move the camera until the beep sound is heard. You can turn the LCD monitor as shown in the diagram, allowing you to shoot at any angle you wish.
38 Diopter Adjustment Adjust the diopter so that the subject is clearly visible through the viewfinder. Adjust by rotating the diopter knob left or right until the subject appears clearly. Adjusting the Brightness of the LCD Monitor You can adjust the brightness of the LCD monitor when it is hard to see.
Chapter SHOOTING 2 Basic Shooting .................................................. 40 Operation Flow ........................................................ 40 Turning on the Camera ........................................... 41 Selecting a Shooting Mode .
40 Turn on the Camera Select a Shooting Mode Select the Recording Destination Select an Image Quality Mode Set the Size of the Subject Check the Position of the Subject Shoot Basic Shooting This section explains the general operation flow and basic shooting instructions.
41 Shooting 2 Turning on the Camera The camera is turned on and off by means of the power switch. q Open the LCD monitor and press the power switch. The camera will turn on.
42 28 28 The recording data will be displayed on the LCD panel or on the LCD monitor. ● LCD Monitor Display When the LCD monitor is open, the display appears, and when the LCD monitor is closed, the display is cleared.
43 Shooting 2 2048 × 1536 Approx. 1.12 MB/image Approx. 568 KB/image Approx. 280 KB/image 1024 × 768 Approx. 376 KB/image Approx. 184 KB/image Approx. 88 KB/image 640 × 480 Approx. 152 KB/image Approx. 72 KB/image Approx. 40 KB/image 18 2048 1536 E Selecting an Image Quality Mode The camera offers nine image quality modes.
44 28 1.3 1.3 WIDE WIDE TELE TELE Magnification Setting the Size of the Subject (Zoom) By moving the zoom lever, you can vary the size of the subject without changing the distance between yourself and the subject (zoom range is equivalent to 35 - 105mm in 35mm camera format).
45 Shooting 2 Checking the Position of the Subject Check the position of your subject through the viewfinder or on the LCD monitor. ■ Viewing Through the Viewfinder Aim the camera at the subject while looking through the viewfinder. ● Shooting Scope Frame the subject within the viewfinder.
46 28 Shooting (Still Picture Mode) Shooting instructions for still picture mode are given below. Hold the camera correctly to keep it steady. q Aim the camera at your subject. Note • Use macro mode to shoot subjects closer than 24cm. See “ Close-up Shooting (Macro Mode) ” → (p.
47 Shooting 2 ERASE THIS IMAGE? START:RELEASE CANCEL:CANCEL ● Flash LED The flash LED (red) lights when you press the shutter button lightly in low light conditions. Note • The flash LED (red) blinks and the LCD monitor is cleared while the flash is charging.
48 Tips Using the Camera for Extended Periods of Time The camera will turn off automatically (auto power off) to conserve the battery if it is left idle (no buttons or switches operated) for a preset time. When you require more time to compose a shot, disable the auto power off feature.
49 Shooting 2 Recording Mode Shooting Function Still Picture Sound Text Conti- nuous Motion Picture With Sound p.52 쑗 쎹 쑗 쎹쎹 Manual Focus p.62 쑗 쎹 쑗쑗 쑗 Flash strength p.55 쑗 쎹 쑗 쎹쎹 Red-Eye Reduction 쑗 쎹쎹 쎹쎹 Mode p.
50 15:32 START/STOP :RELEASE 28 Sound Recording (Sound Mode) In this mode sound can be recorded. The recordable time is displayed according to the available capacity in the recording destination. Important Note • The microphone is located on the front of the camera.
51 Shooting 2 Size (No. of Pixels) 2048 × 1536 Approx. 5 Approx. 12 Approx. 24 1024 × 768 Approx. 17 Approx. 36 Approx. 70 640 × 480 Approx. 46 Approx. 89 Approx. 164 Important Note • In continuous shooting mode, no image appears on the LCD monitor while pictures are being taken.
52 15:32 IMAGE WITH SOUND OFF SHOOTING MODE 1/3 FOCUS AF REDEYE REDUCTION OFF ISO SENSITIVITY AUTO BACK:MENU SELECT: CHANGE: SEL.:ENTER FLASH STRENGTH NORMAL 28 w Press the shutter release button to shoot the image. Shooting starts. The mark blinks during shooting and the recording time is displayed on the LCD panel.
53 Shooting 2 Note • The focus, exposure compensation and white balance are locked in the state in effect when the shutter button was pressed. • Sound recording starts after shooting in (still picture) mode when the image quality mode is set on non-compressed (NC) or PRO (PRO, PRO-L, PRO-H), or in (text) mode.
54 28 The selected flash mode will be displayed. In auto mode, the mark appears only on the LCD monitor and not on the LCD panel. e Press the shutter release button to shoot the image. When the flash is activated, the flash LED (red) lights when you press the shutter release button lightly.
55 Shooting 2 IMAGE WITH SOUND OFF SHOOTING MODE 1/3 FOCUS AF REDEYE REDUCTION OFF ISO SENSITIVITY AUTO BACK:MENU SELECT: CHANGE: SEL.:ENTER FLASH STRENGTH NORMAL 28 ■ Adjusting the Strength of the Flash When shooting with the flash activated ( , lit, blinking), you can adjust the strength of the flash.
56 + /– BACK:CANCEL –2.0 + 2.0 SEL.:ENTER EV + 0.5 Setting the Exposure Compensation As long as the subject is centered in the shooting range, you can take the picture normally as the camera will automatically adjust the exposure compensation for backlighting.
57 Shooting 2 e Press the shutter release button to shoot the image. Note • Enable the keep settings mode to save the exposure compensation level setting. See “ Keep Settings ” → (p.99). • You can take 3 frames in succession at exposure compensation levels of – 0.
58 q Set the mode dial to one of the following [ • • ] and press the WB button. w Press the or button to select the white balance (AUTO • • • • ) and press the ENTER button.
59 Shooting 2 28 Using the Self-Timer The self-timer offers a convenient way to take group pictures with the photographer included. Mount the camera on a tripod or set it on a flat surface to shoot pictures with the self-timer. w Set the mode dial to [ ] or [ ] and press the button.
60 28 Close-up Shooting (Macro Mode) Macro photography allows you to take a close-up picture of a subject. Macro mode is recommended for taking pictures at a distance of less than 24cm (9.5 inches) from the subject. q Set the mode dial to one of the following [ • • • ] and press the button.
61 Shooting 2 Focus Lock Shooting Usually, the auto focus function focuses the camera on the subject that appears in the autofocus field on the LCD monitor or in the viewfinder. If the subject is located outside the autofocus field, it may appear blurred in the resultant shot.
62 28 IMAGE WITH SOUND OFF SHOOTING MODE 1/3 FOCUS AF REDEYE REDUCTION OFF ISO SENSITIVITY AUTO BACK:MENU SELECT: CHANGE: SEL.:ENTER FLASH STRENGTH NORMAL 28 MF r Decide the composition of the picture by moving the camera with the shutter release button held, and then press the shutter release button down fully.
63 Shooting 2 IMAGE WITH SOUND OFF SHOOTING MODE 1/3 FOCUS AF REDEYE REDUCTION OFF ISO SENSITIVITY AUTO BACK:MENU SELECT: CHANGE: SEL.:ENTER FLASH STRENGTH NORMAL 28 Red-Eye Reduction Mode If you shoot a subject in a dark place with the flash activated, the eyes of the subject may appear red in the resultant picture.
64 IMAGE WITH SOUND OFF SHOOTING MODE 1/3 FOCUS AF REDEYE REDUCTION OFF ISO SENSITIVITY AUTO BACK:MENU SELECT: CHANGE: SEL.:ENTER FLASH STRENGTH NORMAL 28 ISO200 Changing the ISO Setting You can change the ISO sensitivity. q Set the mode dial to one of the following [ • • ] and press the MENU button.
65 Shooting 2 DATE IMPRINT DATE SHOOTING MODE 2/3 SOFT MODE OFF INTERVAL MODE AUTO BRACKET OFF BACK:MENU SELECT: CHANGE: SEL.:ENTER MONOCHROME MODE OFF 28 2000/ 6/15 10:15 DATE IMPRINT OFF SHOOTING MODE 2/3 SOFT MODE OFF INTERVAL MODE AUTO BRACKET OFF BACK:MENU SELECT: CHANGE: SEL.
66 28 SOFT DATE IMPRINT OFF SHOOTING MODE 2/3 SOFT MODE OFF INTERVAL MODE AUTO BRACKET OFF BACK:MENU SELECT: CHANGE: SEL.:ENTER MONOCHROME MODE OFF 28 SEPIA t Press the shutter release button to shoot the image. Note • Enable the keep settings mode to save the Soft setting.
67 Shooting 2 2/3 SOFT MODE OFF INTERVAL MODE AUTO BRACKET OFF BACK:MENU SELECT: CHANGE: SEL.:ENTER MONOCHROME MODE OFF DATE IMPRINT OFF SHOOTING MODE 0:10:00 SELECT: BACK:CANCEL SEL.:ENTER INTERVAL MODE Interval Shooting The camera can be set to take pictures automatically at preset intervals.
68 28 INTERVAL MODE START:RELEASE INTERVAL MODE START:RELEASE CANCEL:CANCEL CANCEL:CANCEL t Press the ENTER button again after setting the digit for the seconds.
69 Shooting 2 2/3 SOFT MODE OFF INTERVAL MODE AUTO BRACKET OFF BACK:MENU SELECT: CHANGE: SEL.:ENTER MONOCHROME MODE OFF DATE IMPRINT OFF SHOOTING MODE 28 AB 0.0 + 0.5 – 0.5 w Press the or button to select [AUTO BRACKET]. e Press the or button to select [ON] and press the ENTER button.
70 Image Quality (Compression Rate) Size (No. of Pixels) 2048 × 1536 Approx. 6 MB/image 1024 × 768 Approx. 1.5 MB/image 640 × 480 Approx. 640 KB/image NO COMPRESSION OFF SHOOTING MODE 3/3 PRO OFF BACK:MENU SELECT: CHANGE: SEL.:ENTER TIME EXPOSURE OFF 2 2048 1536 w Press the or button to select [NO COMPRESSION].
71 Shooting 2 Important Note • When you take pictures using PRO-L or PRO-H mode, 2 shots are taken when you press the shutter release button. The subject is therefore limited to still objects, and the camera should always be mounted on a tripod.
72 Setting the Time Exposure Mode The time exposure mode is used when photographing bright subjects such as fireworks and racecars in a dark place. This feature can be used in the still picture mode [ ]. Important Note • Mount the camera on a tripod, etc.
Chapter PLAYBACK 3 Before Starting to Playback Recorded Images .............................................. 74 Files That Can Be Played on the Camera .............. 74 Connecting to a TV .................................................. 74 Playing Back a File .
74 Before Starting to Playback Recorded Images This section explains what kind of files can be played back on the camera and how to play back recorded images using a TV.
75 Playback 3 q Check that both the camera and the TV are turned off. w Open the terminal cover on the camera and connect the AV interface cable to the AV out terminal. e Connect the other end of the AV interface cable to the Video In terminal on the TV.
76 Playing Back a File This section provides instructions for playing back recorded files. Playing Back a Still Picture/Text/Continuous File Follow the procedure below to play files recorded in (still picture), (text) or (continuous shooting) mode, and still picture or text files with sound.
77 Playback 3 ● Playback Display Pictures taken in the following image sizes will appear on the LCD monitor or TV monitor as shown below. Note • Files may take a while to play after the camera is turned on or the mode dial is set, depending on the capacity of the SmartMedia memory card.
78 If you keep the zoom lever moved while playback is suspended, you can fast forward by moving to or rewind by moving to . ● Adjusting the Volume If you press the or button during playback, the volume adjustment indicator will be displayed. Press the or button to adjust the volume.
79 Playback 3 ● Single frame forward/reverse, slow playback/reverse slow playback While playback is being suspended, move the zoom lever to to advance single image; move the zoom lever to to return one frame. Also, keeping the zoom lever to starts slow playback and keeping the zoom lever to starts reverse slow playback.
80 Special Playback Functions This section explains the various playback functions. Multi Image Playback Multi-image playback lets you view six images at once on the LCD monitor for quick searching. q Set the mode dial to [ ] and press the MENU button.
81 Playback 3 Zoom Playback The image file being played is magnified both in height and width. Depending on the size of the image, images can be displayed in the following magnifications. • 2048 × 1536: 1.3X, 1.6X, 3.2X • 1024 × 768: 1.6X • 640 × 480: 2X • 3072 × 2304: 2.
82 Auto Playback This function automatically plays all the files stored in the internal memory or on the SmartMedia memory card. q Set the mode dial to [ ] and press the MENU button. w Press the or button to select [AUTO PLAYBACK]. e Press the or button to select the playback time (1 SEC.
83 Playback 3 w Press the or button to select [ROTATION]. e Press the or button to select the angle (R90°, L90°, 180°) and press the ENTER button. When you press the ENTER button, the file will be displayed at the specified angle .
84 e Press the or button to select the copy mode and press the ENTER button. Operation varies depending on the copy mode. See: •“ Copying All Files ” (p.84) •“ Copying Selected Files ” (p.84) ■ Copying All Files q Press the shutter release button.
85 Playback 3 q Insert a SmartMedia memory card, set the mode dial to [ ] and press the MENU button. See •“ Inserting a SmartMedia Memory Card ” (p.28). w Press the or button to select [SELECT FOLDER] and press the ENTER button. e Press the or button to select a folder and press the ENTER button.
86 Note • To cancel a selection, press the ENTER button again and the mark will disappear. r Press the shutter release button. The files will be protected. ● How to Unprotect a File Choose a protected file on the protect menu (step e ) and press the ENTER button.
87 Playback 3 q Set the mode dial to [ ] and press the button to select , press the MENU button. w Press the or button to select [DPOF] and press the ENTER button. e Press the or button to select the item you wish to set and press the ENTER button. The procedure differs depending on the item you wish to set.
88 e Press the or button to specify the number of prints and press the ENTER button. Note • To cancel the setting, set the number to zero. The number of prints will be set and the screen will return to the six-image display. To continue setting the number of prints, repeat steps w and e .
89 Playback 3 w Press the or button to specify the number of index prints and press the ENTER button. The display will return to the DPOF setting menu. Note • To cancel the setting, set the index number to zero. e Press the CANCEL button. The display will return to the playback menu.
90.
Chapter ERASING 4 Erasing Files ............................................. 92 Erase Single Image ....................................... 92 Erase All Images ........................................... 93 Erase Selected Images ......................
92 Erasing Files This section explains how to erase recorded files. There are three ways to erase files: 1) ERASE SINGLE IMAGE for erasing one selected file at a time. 2) ERASE ALL IMAGES for erasing all files at once. 3) ERASE SELECTED IMAGES for erasing multiple selected files.
93 Erasing 4 r Press the or button to select the file to be erased and press the shutter release button. The selected file will be erased. To erase more files, repeat step r . t Press the CANCEL button. The display will return to the erase menu. Note • When a file is erased, the subsequent file numbers are reassigned.
94 Erase Selected Images Multiple selected files are erased. q Set the mode dial to [ ] and press the button to select the erase source. w Press the button. e Press the or button to select [ERASE SELECTED IMAGES] and press the ENTER button. r Press the or button and the or button to select a file to be erased and press the ENTER button.
Chapter SETTINGS/MISCELLANEOUS 5 Transferring Images to a PC .................... 9 6 Changing Camera Settings ...................... 9 8 Formatting a Card/Internal Memory .............. 98 Keep Settings ...............................................
96 Transferring Images to a PC You can transfer recorded files to a personal computer by using a serial cable and software bundled with the camera. Note • Refer to “Readme” file in the CD-ROM for installation and usage.
97 Settings/Miscellaneous 5 • Display colors : 256 or more (recommended 32,000 or more) • Keyboard & mouse : Keyboard and mouse connectable to the Macintosh PC used • CD-ROM drive : CD-ROM drive supported by the Macintosh PC used • QuickTime : QuickTime 4.
98 Changing Camera Settings This section explains how to format (initialize) a SmartMedia memory card or the internal memory, and how to change the various settings such as auto power off, beep sound and keep settings. Formatting a Card/Internal Memory Follow the procedure below to format a SmartMedia memory card or the internal memory.
99 Settings/Miscellaneous 5 Important Note • Formatting a SmartMedia memory card or the internal memory will erase all the files recorded on the card or in the memory (including protected files). Copy any important files before formatting. See “ Copying Image Files ” → (p.
100 Changing LCD Confirmation Time When you press the shutter button to take a picture in (still picture) mode, the shot image appears on the LCD monitor. You can select the time for confirming the image after shooting from 0 sec., 1 sec., 2 sec., 3 sec.
101 Settings/Miscellaneous 5 Note • Turn the power on again to reactivate the camera if it shuts off in auto power off mode. • When using an AC adapter (option), the auto power off function is disabled even if you have set a time (except for interval shooting).
102 File Numbering System When recording onto a SmartMedia memory card, you can choose whether the shot files will automatically be assigned consecutive numbers. ● When [SEQUENTIAL NO.] is [ON] Numbers from R0010001 to R9999999 will be assigned to files.
103 Settings/Miscellaneous 5 Changing Video-Out Signal Method (NTSC/PAL) Switches the video system for connecting the camera to a TV set to play record images on TV. See •“ Connecting to a TV ” (p.74) for instructions on how to connect the camera to a TV.
104 Initializing Settings You can reset all settings except the date. Important Note • Data set by Keep Settings will also be initialized to its factory default settings. q Set the mode dial to [ ]. w Press the or button to select [INITIALIZE SETTING] and press the ENTER button.
105 Settings/Miscellaneous 5 Using the Remote Control This section explains how to operate the camera using the optional DR-3 remote control unit. Important Note • The remote control receiver is located at the upper left of the LCD monitor. Operate the remote control unit by pointing it at the LCD monitor.
106 Note • Use the zoom button to vary the size of the subject. Press the zoom button to magnify the subject and press the zoom button to decrease the size of the subject. ■ Setting Exposure Compensation RELE ASE ERASE FW D PROGR AM EV MULTI REV ENTER q Press the EV (+/ – ) button.
107 Settings/Miscellaneous 5 ■ Magnifying an Image (Zoom Playback) RELE ASE ERASE FW D PROGR AM EV MULTI REV ENTER q Press the PROGRAM button. The image will be displayed in zoom playback. w Press the or button and the FWD ( 왕 ) or REV ( 왓 ) button to shift the playback position.
108 e Use the FWD ( 왕 ) or REV ( 왓 ) button to select [ERASE SINGLE IMAGE] and press the ENTER button. RELE ASE ERASE FW D PROGR AM EV MULTI REV ENTER r Use the FWD ( 왕 ) or REV ( 왓 ) button to select the file to be erased and press the RELEASE button.
APPENDIX Accessories ............................................ 110 Handling Precautions ............................. 111 Care and Storage ................................... 112 Troubleshooting ..................................... 113 Using Your Digital Camera in Other Countries .
110 Accessories • Microsoft, MS and Windows are registered trademarks of Microsoft Corporation in the United States of America and other countries. • Macintosh is a registered trademark of Apple Computer, Inc., in the United States of America and other countries.
111 Appendix Handling Precautions ● This camera is not waterproof. Keep away from water, rain, beverages, etc. Consult your nearest Ricoh service office if any liquid gets into the camera. ● Be careful not to drop the camera or subject it to impact.
112 Care and Storage ■ Care ● Fingerprints or dirt on the lens or AF viewfinder will reduce the image quality so take extra care not to get it dirty. ● Do not wipe dust or smears off the lens or AF viewfinder with your fingers. Use a lens blower, available at most photographic suppliers, to blow dust off, or a soft cloth to wipe it lightly.
113 Appendix Battery expired, improperly inserted or not loaded Power is not turned on or mode dial is not set Shutter release button only pressed halfway SmartMedia memory card not formatted No space.
114 Dirty lens Subject not in center of autofocus field Subject difficult to focus Shooting mode is set to (sound), (continuous) or (moving image) Flash is set to (flash off) mode Mode dial is set to macro mode White balance set to mode other than auto Battery expired Subject farther than approx.
115 Appendix Error in internal memory of camera Error in SmartMedia memory card in usecard Battery expired Auto power off activated Obstruction between remote control unit and camera sensor Dirty remo.
116 Wrong type of SmartMedia memory card SmartMedia memory card incorrectly oriented Battery expired Camera malfunction Date and time setting is incorrect Battery has been removed Camera not set to er.
117 Appendix Using Your Digital Camera in Other Countries Ricoh AC-3 AC Adapter (optional) • The AC-3 AC adapter adjusts automatically to voltages ranging from 100V to 240V and frequencies of 50Hz to 60Hz. • Some countries use electrical outlets which have different shapes.
118 About the Warranty and Servicing 1. The Ricoh RDC-7 camera is backed by a one-year limited warranty. During the warranty period, which starts from the date of purchase, any defective parts will be repaired free of charge.
119 Appendix 9. Parts essential to the servicing of this camera - that is, components required to maintain the functions and quality of this camera - will be available for a period of seven years after the camera is discontinued.
120 Specifications ■ General ● Video Signal Protocol ● Power Source Voltage ● Dimensions ● Mass ● Operating Temperature Range ● Operating Humidity Range ● Storage Temperature Range ■.
121 Appendix ■ Image Data Recording and Playback ● Resolution • Still picture mode • Text mode • Moving image mode ● File Format • Still picture mode • Text mode • Moving image mode .
122 Recording Capacities The table below gives approximate recording picture counts available by SmartMedia memory card capacity and by picture quality/size. * Sizes (no. of pixels) are as follows. : 3072 × 2304 pixels : 2048 × 1536 pixels : 1024 × 768 pixels : 640 × 480 pixels * Image quality (compression rate) is as follows.
123 Appendix Declaration of Conformity “ The Product complies with the requirements of the EMC Directive 89/336/EEC. ”.
124 INFORMATION TO THE USER USA FCC Part15 Class B The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Ricoh Service Offices Ricoh Co., Ltd. Ohmori NM Building 1-1 Ohmori-Kita 2-chome Ota-ku, Tokyo 143-0016 JAPAN http://www.ricoh.com Ricoh Factory Service Center 3235 Sunrise Blvd., Suite2 Rancho Cordova, CA 95742 http://www.ricohcpg.com/ Ricoh Europe B.
RICOH CO., LTD. Ohmori NM Building 1-1 Ohmori-kita 2 chome Ota-ku, Tokyo 143-0016 Japan L2112546A.
An important point after buying a device Ricoh RDC-7 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ricoh RDC-7 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ricoh RDC-7 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ricoh RDC-7 you will learn all the available features of the product, as well as information on its operation. The information that you get Ricoh RDC-7 will certainly help you make a decision on the purchase.
If you already are a holder of Ricoh RDC-7, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ricoh RDC-7.
However, one of the most important roles played by the user manual is to help in solving problems with Ricoh RDC-7. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ricoh RDC-7 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
