Instruction/ maintenance manual of the product FV-L500B1 Ricoh
Go to page of 31
1/31 FV -L500 B1 User ’s G uide Rev . 1.02 Small Cubic T ype 5.0 Mega Pixel CCD Monochrome PoCL Camera Link Camera FV -L500B1 User ’s Guide RICOH CO MP A NY , L TD.
2/31 FV -L500 B1 User ’s G uide Rev . 1.02 T able of Content s 1 Connector Specifications ............................... .............................. .................... .............................. .................... .. 3 1.1 Camera Link Connector .
3/31 FV -L500 B1 User ’s G uide Rev . 1.02 1 Connector Specifications 1.1 Camera Li nk Connect or SDR (3M) or equiva lent This product is a PoCL type. When a frame grabbe r is PoCL compli ant, DO NOT SUPPLY POW ER FROM THE I/O CONNECTOR. When a frame grabbe r is NOT PoCL compliant, supply power from t he I/O connecto r.
4/31 FV -L500 B1 User ’s G uide Rev . 1.02 1.2 Power-I/O Connector HR10A-7R-6PB （ Hirose ） or equivalent This connector is f or the power supply (12 Vdc) and input /output sig nals. Use HR10A-7P-6S ( Hirose) or equivalent f or the cable side.
5/31 FV -L500 B1 User ’s G uide Rev . 1.02 1.3 Equivalent Circuit for the Input Pin of t h e I/ O Connector +3.3V +3.3V TC7WH241FK TOSHIBA TRIGGER IN 10kohm 100ohm On resister Max.
6/31 FV -L500 B1 User ’s G uide Rev . 1.02 2 Camera Output T im ing Chart s 2.1 Normal Mod e (Setting 1 0H: 1XX0X XXX) 2.1.1 Horizont al T iming 1 CLK = 15.
7/31 FV -L500 B1 User ’s G uide Rev . 1.02 2.1.2 V ertical T iming 2.1.2.1 Normal Ful l Scann i ng (Setting 1 0H: 1XX00X XX, 1 1H: XXX0X 000) 1 H = 30.063 μ s, 16.000 Hz 2.1.2.2 Partial Ful l Scanning (Setting 1 0H: 1XX01X XX, 1 1H: XXX0X 000) 1 H = 30.
8/31 FV -L500 B1 User ’s G uide Rev . 1.02 2.1.2.3 1/2 Partial S canning (Setting 1 0H: 1XX01X XX, 1 1H: XXX0X 001) 1 H = 30.063 μ s, 32.015 H z 2.1.
9/31 FV -L500 B1 User ’s G uide Rev . 1.02 2.1.2.5 V ariable Partial S canning ( Setting 10H: 1XX01X XX, 1 1H: XXX0X1 1 1) Internal HD Internal VD Video out EXT_TRIG FIX_TRIG (Common) 10 20 30 40 5 .
10/31 FV -L500 B1 User ’s G uide Rev . 1.02 2.2 Binning Mo de (Setting 10H: 1X X1XX XX) 2.2.1 Horizont al T iming 1 CLK = 15.625 ns 700 CLK 1224 CLK Video out LVAL DVAL Horizontal b lanking 1924 CLK.
1 1/31 FV -L500 B1 User ’s G uide Rev . 1.02 2.2.2 V ertical T iming 2.2.2.1 Binning Ful l Scann i ng (Setting 10H: 1XX10X XX, 1 1H: XXX0X 000) 1 H = 30.063 μ s, 32.015 H z 2.2.2.2 Binning Par tial Full Scanni ng (Setting 1 0H: 1XX1 1XXX, 1 1H: XXX 0X000) 1 H = 30.
12/31 FV -L500 B1 User ’s G uide Rev . 1.02 2.2.2.3 Binning 1/2 P artial Scanning (Setting 1 0H : 1X X1 1XXX , 1 1H : X X X0X 001) 1 H = 30.063 μ s, 54.890 Hz 2.2.2.4 Binning 1/4 P artial Scanning (Setting 1 0H : 1X X1 1XXX , 1 1H : X X X0X 010) 1 H = 30.
13/31 FV -L500 B1 User ’s G uide Rev . 1.02 2.3 Data Or der on the Ca mera Link Out put DA0 to DA1 1: 12bit data for one pixel f rom the first tap DB0 to DB1 1: 12bit data for one pixel f rom the se.
14/31 FV -L500 B1 User ’s G uide Rev . 1.02 2.4 2 T aps Tr ansferrin g Image (2XE-1Y ） X W Y H X W -1 Y H X 2 Y H X 1 Y H Tap1 Sep X = 1 Sep Y = 1 X 1 Y H-1 X 2 Y H-1 X W Y H-1 X W -1 Y H-1 X 1 Y .
15/31 FV -L500 B1 User ’s G uide Rev . 1.02 3 Camera Operational Mode 3.1 Normal Mod e In this m ode, the images are output continuous ly . 3.1.1 Frame Expo sure 3.
16/31 FV -L500 B1 User ’s G uide Rev . 1.02 3.2 Pulse W idth T rigger Mode In this “pulse width trigger mode” with pos itive po larity , the camera exposure starts at the rising edge of the trigger si gnal and stops at the falling edge of the trigger s ignal.
17/31 FV -L500 B1 User ’s G uide Rev . 1.02 3.2.2 Pulse W idth T rigger Mode (Non-Reset) Note 1: The cam era does NOT switch to normal mode when the long exposure m ode is selected. This tim ing chart shows with the long ex posure mode selected. Note 2: The internal VD signal does not rese t by the trigger signa l.
18/31 FV -L500 B1 User ’s G uide Rev . 1.02 3.3 Edge Pres et Trigger Mode In this “edge preset tr igger m ode”, the camera exposure starts at t he rising edge of the trigger s ignal like the “pulse width trigger m ode” in the previous sec tions.
19/31 FV -L500 B1 User ’s G uide Rev . 1.02 3.3.2 Edge Pres et Trigger Mode (Non-Reset) Note 1: The cam era does NOT switch to normal mode when the long exposure m ode is selected. This tim ing chart shows when the long exposure mode selected. Note 2: The internal VD signal does not rese t by the trigger signa l.
20/31 FV -L500 B1 User ’s G uide Rev . 1.02 3.4 H Reset Mod e Normally , v ideo noise appears when the beginning of trigger si gnal is applied before f inishing the video read-out of the prev ious f rame. This noise is caused by the SU B puls e, which is acti vated to clear al l res idual c harges on the CCD p rior t o a new exposure.
21/31 FV -L500 B1 User ’s G uide Rev . 1.02 4 Communication Protocol This camera has a communication function that enables external devises, such as a P C, to control the cam era’ s functions. Please use the “R-GigE-Software” comm unication software, o r the following comm unication protocol to communicate to the cam era: 4.
22/31 FV -L500 B1 User ’s G uide Rev . 1.02 The description of the format is as follows. Name Descriptions SOF S tart of Frame. Alwa y s set or rec eive the value as “02H” Device Code This indicates the dest ination of comm unication.
23/31 FV -L500 B1 User ’s G uide Rev . 1.02 【 Example Code 】 Reading the data from the com m and 00H Comm and to send: 02H, 00H, 00H, 01 H, 00H, 03H SOF Device Code Read/Write Page Selection.
24/31 FV -L500 B1 User ’s G uide Rev . 1.02 4.4 Camera C ontrol Co mmand 4.4.1 Camera C ommand Li st The data unit of the each comm and is 1 byte (8bit). The data can be s aved to the EEPROM if there is an “X” in the “Sa ve to EEPROM” colum n in the following list.
25/31 FV -L500 B1 User ’s G uide Rev . 1.02 81 to EFH Reserved - - Command No. R/W Save to EEPROM Function Initial Data Data Range F0H R/W IO connector signals(8bit: D[70]) F1 to FFH Reserved - -.
26/31 FV -L500 B1 User ’s G uide Rev . 1.02 4.4.2 Description s of the C amer a Control C ommands (The underline setti ngs are the factor y default settings) Command No. Command Descriptions 10H: MOD1[70] [Camera function mode setting 1] Initial data: 09H This sets the following camera function mode.
27/31 FV -L500 B1 User ’s G uide Rev . 1.02 Command No. Command Descriptions 14H: UART [70] [Communication mode] Initial Data: 01H This sets the communication modes. D[70] D7 D6 D5 D4 D3 D2 D1 D0 D7~D2: No Function Set always “000000” D1~D0: Communication Mode 00: 38,400 bps 01: 9,600 bps 10 to 1 1: No function (Prohibited setting.
28/31 FV -L500 B1 User ’s G uide Rev . 1.02 Command No. Command Descriptions 26H: PWR[70] 27H: PWR[158] [Effective line numbers in the variable p art ial scanning] Initial Data: P W R[150] = 20 58, Data Range: 0 to 2058 This sets the number of the tot a l effe c tive lines (image height) in the variable part ial scanning mode.
29/31 FV -L500 B1 User ’s G uide Rev . 1.02 Command No. Command Descriptions 68H: DIGIT AL_ CLAMP[70] [Digital clamp] Initial data : DIGIT AL_CLA M P[7.
30/31 FV -L500 B1 User ’s G uide Rev . 1.02 Command No. Command Descriptions 79H: EFFCT[70] [Image effect selection] Initial data: E FFCT[7..0] = 0 Sets the image effe c t.
31/31 FV -L500 B1 User ’s G uide Rev . 1.02 5 Revision History Rev Date Changes Note 1.00 2012/06/15 Initial Release 1.01 2012/07/13 Updated Document T itle Co m munication Protocol 78H T est pattern 79H Pasteurization Added 3E-3FH T est patte rn variable level 1.
An important point after buying a device Ricoh FV-L500B1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ricoh FV-L500B1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ricoh FV-L500B1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ricoh FV-L500B1 you will learn all the available features of the product, as well as information on its operation. The information that you get Ricoh FV-L500B1 will certainly help you make a decision on the purchase.
If you already are a holder of Ricoh FV-L500B1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ricoh FV-L500B1.
However, one of the most important roles played by the user manual is to help in solving problems with Ricoh FV-L500B1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ricoh FV-L500B1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
