Instruction/ maintenance manual of the product FV-L200B1 Ricoh
Go to page of 32
1/32 FV -L200 B1 User ’s G uide Rev . 1.01 Small Cubic T ype UXGA CCD Monochrome PoCL Camera Link Camera FV -L200B1 User ’s Guide RICOH CO MP A NY , L TD.
2/32 FV -L200 B1 User ’s G uide Rev . 1.01 T able of Content s 1 Connector Specifications ............................... .............................. .................... .............................. .................... .. 3 1.1 Camera Link Connector .
3/32 FV -L200 B1 User ’s G uide Rev . 1.01 1 Connector Specifications 1.1 Camera Li nk Connect or SDR (3M) or equiva lent This product is a PoCL type. When a f rame grabber board is PoCL compliant, DO NOT SUPPLY P OWER FROM THE I/O CONN ECTOR. When a frame grabbe r board is NOT PoCL compliant, suppl y power from the I/O conn ector.
4/32 FV -L200 B1 User ’s G uide Rev . 1.01 1.2 Power-I/O Connector HR10A-7R-6PB （ Hirose ） or equivalent This connector is f or the power supply (12 Vdc) and input /output sig nals. Use HR10A-7P-6S ( Hirose) or equivalent f or the cable side.
5/32 FV -L200 B1 User ’s G uide Rev . 1.01 2 Camera Output T iming Chart s 2.1 Normal Mod e (Setting 1 0H: 1XX0X XXX) Normal Full Scannin g Partial Full Scanning 1/2 Partial Scanning 1/4 Partial Scanning Clock Speed (MHz) Normal x1/2 x1/4 Normal x1/2 x1/4 Normal x1/2 x1/4 Norm al x1/2 x1/4 Frame Rate (Hz) 15.
6/32 FV -L200 B1 User ’s G uide Rev . 1.01 2.1.2 V ertical T iming 2.1.2.1 No r mal Full Sc anning ( Setting 1 0H: 1XX00X XX, 1 1H: X000X000) 1 H = 208.5963 μ s, 3.8291 Hz at 3 .8fps 1 H = 104.2968 μ s, 7.6582 Hz at 7 .6fps 1 H = 52.1484 μ s, 15.
7/32 FV -L200 B1 User ’s G uide Rev . 1.01 2.1.2.3 1/2 Partial Scannin g (setting 10 H : 1X X01XX X, 1 1H: X 000X001) 1 H = 208.5963 μ s, 7.6582 Hz at 3 .8fps 1 H = 104.2968 μ s, 15.3164 Hz at 7.6fps 1 H = 52.1484 μ s, 30.63 28 Hz at 1 5.3fp s 2.
8/32 FV -L200 B1 User ’s G uide Rev . 1.01 2.1.2.5 V ariable Partial Scan ning (setting 10 H: 1XX01X XX, 1 1H: X000X1 1 1) Internal HD Internal VD Video out EXT_TRIG FIX_TRIG (Common) 10 20 30 40 50.
9/32 FV -L200 B1 User ’s G uide Rev . 1.01 2.2 Binning Mo de (setting 10H: 1X X1XXXX) Binning Full Scanning Binning Partial Full Scanning Binning 1/2 Partial Scanning Binning 1/4 Partial Scanning Clock Speed (MHz) Norm al x1/2 x1/4 Norm al x1/2 x1/4 Norm al x1/2 x1/4 Norm al x1/2 x1/4 Frame Rate (Hz) 30.
10/32 FV -L200 B1 User ’s G uide Rev . 1.01 2.2.2 V ertical T iming 2.2.2.1 Binning Full Scann i ng (setting 10 H: 1XX10X XX, 1 1H: X000X000) 1 H = 208.5963 μ s, 7.6582 Hz at 3 .8fps 1 H = 104.2968 μ s, 15.3164 Hz at 7.6fps 1 H = 52.1484 μ s, 30.
1 1/32 FV -L200 B1 User ’s G uide Rev . 1.01 2.2.2.3 Binning 1/2 Partia l Scanni n g (setting 10H: 1XX 1 1XX X, 1 1H: X000X001) 1 H = 208.5963 μ s, 14.0588 Hz at 3.8fps 1 H = 104.2968 μ s, 28.1 175 Hz at 7.6fps 1 H = 52.1484 μ s, 56.23 50 Hz at 1 5.
12/32 FV -L200 B1 User ’s G uide Rev . 1.01 2.3 Data Or der on the Ca mera Link Out put DA0 ～ DA9: 10 bit data for one pixel DA0 ～ DA7: 8bit data for one pixe l DA8 DA5 DA4 DA3 DA 2 DA1 DA0 DA9 .
13/32 FV -L200 B1 User ’s G uide Rev . 1.01 2.4 1 T aps Tr ansferrin g Image （ 1X-1Y ） 2.5 Pixel T ransferring I mage Pixeln of Data: nth pixel bei ng transferred Pixel1 of Data Pixel2 of Data X.
14/32 FV -L200 B1 User ’s G uide Rev . 1.01 3 Came ra Operational M ode 3.1 Normal Mod e In this m ode, the images are output continuous ly . 3.1.1 Frame Expo sure 3.
15/32 FV -L200 B1 User ’s G uide Rev . 1.01 3.2 Pulse W idth T rigger Mode In this “pulse width trigger mode” with pos itive po larity , the camera exposure starts at the rising edge of the trigger si gnal and stops at the falling edge of the trigger s ignal.
16/32 FV -L200 B1 User ’s G uide Rev . 1.01 3.2.2 Pulse W idth T rigger Mode (Non-Reset) Note 1: The cam era does NOT switch to normal mode when the long exposure m ode is selected. This tim ing chart shows with the long ex posure mode selected. Note 2: The internal VD signal does not rese t by the trigger signa l.
17/32 FV -L200 B1 User ’s G uide Rev . 1.01 3.3 Edge Pres et Trigger Mode In this “edge preset tr igger m ode”, the camera exposure starts at t he rising edge of the trigger s ignal like the “pulse width trigger m ode” in the previous sec tions.
18/32 FV -L200 B1 User ’s G uide Rev . 1.01 3.3.2 Edge Pres et Trigger Mode (Non-Reset) Note 1: The cam era does NOT switch to normal mode when the long exposure m ode is selected. This tim ing chart shows when the long exposure mode selected. Note 2: The internal VD signal does not rese t by the trigger signa l.
19/32 FV -L200 B1 User ’s G uide Rev . 1.01 3.4 H Reset Mod e Normally , v ideo noise appears when the beginning of trigger si gnal is applied before f inishing the video read-out of the prev ious f rame. This noise is caused by the SU B puls e, which is acti vated to clear al l res idual c harges on the CCD p rior t o a new exposure.
20/32 FV -L200 B1 User ’s G uide Rev . 1.01 4 Communica tion Prot ocol This camera has a communication function that enables external devises, such as a P C, to control the cam era’ s functions. Please use the “R- CLinkCtrl” comm unication software, or the following c ommunication protoc ol to comm unicate to the cam era: 4.
21/32 FV -L200 B1 User ’s G uide Rev . 1.01 The description of the format is as follows. Name Descriptions SOF S tart of Fram e. Alwa ys set or receive the value as “02H” Device Code This indicates the dest ination of comm unication.
22/32 FV -L200 B1 User ’s G uide Rev . 1.01 【 Example Code 】 Reading the data from the com m and 00H Comm and to send: 02H, 00H, 00H, 01H, 0 0H, 03H SOF Device Code Read/Write Page Selection.
23/32 FV -L200 B1 User ’s G uide Rev . 1.01 4.4 Camera C ontrol Co mmand 4.4.1 Camera C ommand Li st The data unit of the each com mand is 1 byte (8bit). The data can be saved to the E EPROM if there is an “ X” in the “Save to EEPRO M” column in the following list.
24/32 FV -L200 B1 User ’s G uide Rev . 1.01 Command No. R/W Save to EEPROM Function Initial Dat a Dat a Range 78H R/W X T est pat tern selection (8b it: D[7.
25/32 FV -L200 B1 User ’s G uide Rev . 1.01 4.4.2 Description s of the C amer a Control C ommands (The underline setti ngs are the factor y default settings) Command No. Command Descriptions 10H: MOD1[70] [Camera function mode setting 1] Initial data: 09H This sets the following camera function mode.
26/32 FV -L200 B1 User ’s G uide Rev . 1.01 Command No. Command Descriptions 12H: MOD3[70] [Camera function mode setting 3] Initial data: 0 This sets the following camera function modes. D[70] D7 D6 D5 D4 D3 D2 D1 D0 D7~D6: Video Out 00: 10bit 01: 8bit 10: 12bit 1 1: No function (Prohibited setting.
27/32 FV -L200 B1 User ’s G uide Rev . 1.01 Command No. Command Descriptions 20H: SVR[70] 21H: SVR[158] [Exposure time (H) of the electronic shutter] Initial Data: SVR[150] = 0, Dat a Range: 0 to 4095 Sets the preset shutter speed (or CCD ex posure time) for electronic shutter .
28/32 FV -L200 B1 User ’s G uide Rev . 1.01 Command No. Command Descriptions 28H: DL Y[70] 29H DL Y[15...8] [Delay time for the trigger] Initial Data: DL Y[70] = 0, Data Range: 0 to 65,535 Sets the delay time from the trigger input signal to the st art of the exposure.
29/32 FV -L200 B1 User ’s G uide Rev . 1.01 Command No. Command Descriptions 78H: TESTP[70] [T est pattern selection] Initial d ata: TEST P[7. .0] = 00H Sets the test patt ern output from the camera.
30/32 FV -L200 B1 User ’s G uide Rev . 1.01 Command No. Command Descriptions A0H: PDC0[70] [Pixel defect correction mode] Initial data: PDC0[7..0] = 0 D[7..0] D7 D6 D5 D4 D3 D2 D1 D0 D7: Write the correction index 0 1 * W rites the coordinates of the comm and, A2 to A5, to the in dex number specified b y the command A1.
31/32 FV -L200 B1 User ’s G uide Rev . 1.01 Command No. Command Descriptions C5H: [70] [Look-up table (Gamma)] Initial dat a: [7..0] = 00H D[7..0] D7 D6 D5 D4 D3 D2 D1 D0 D7 to D3: No function Al.
32/32 FV -L200 B1 User ’s G uide Rev . 1.01 Revision Histor y Rev Date Changes Note 1.00 2012/06/20 Initial Release 1.01 2012//07/13 Updated Document T itle Comm unication Protocol 20-21H S VR 28-29H DL Y 78H T est pattern, 79H Paste urization Deleted F1H comm and due to test use onl y RICOH CO MP A NY , L TD.
An important point after buying a device Ricoh FV-L200B1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ricoh FV-L200B1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ricoh FV-L200B1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ricoh FV-L200B1 you will learn all the available features of the product, as well as information on its operation. The information that you get Ricoh FV-L200B1 will certainly help you make a decision on the purchase.
If you already are a holder of Ricoh FV-L200B1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ricoh FV-L200B1.
However, one of the most important roles played by the user manual is to help in solving problems with Ricoh FV-L200B1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ricoh FV-L200B1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
