Instruction/ maintenance manual of the product 615C Ricoh
Go to page of 76
Operating Instructions About This Machine Read this manual carefully before yo u use this machi ne and keep it h andy for future reference. For safe and corre ct use, be sur e to rea d the Safety Informatio n in this manual b efore using the m achine.
Introduction This manual contains detailed instructions and note s on th e operation and use of this ma chine. For your safety and benefit, read this manual carefully be fo re using the machine. Kee p this manual in a handy place for quick reference. Important Contents of this manual are subject to change witho ut prior notice.
i Manuals for This Machine Refer to the manuals that are relevant to what y ou want to do w ith the machine. ❖ About This Machine Be sure to read the Safety Informatio n in this manual before using the ma- chine. This manual provides an introductio n to the functions of the mac hine.
ii ❖ Other manuals • PostScript3 Supplement •U N I X S u p p l e m e n t • Manuals for DeskTopBinder Li te • DeskTopBinder Lite Setup Guide • DeskTopBinder Introduction Guide •A u t o D o c u m e n t L i n k G u i d e Note ❒ Manuals provided are specific t o machine types.
iii What You Can Do with This Machine This section i ntroduces the features of this machi ne. Note ❒ For details about options, see “Options”. Reference p.14 “Options” Copier, Facsimile, Printe r, and Scanner Functions This machine provides copi er, facsimile (optional), pr inter, and scanner func- tions.
iv Paperless Fax Transmission You can send a file by fax without printing it. Transmission You can send a fax from your computer over the network (Ethernet, IEEE 1394 (IPv4 over 1394), or wireless LAN) to this machine, which then forwards the fax via its telephone co nnection (LAN-Fax).
v Fax Transmission and Rece ption Through the Internet You can send fax documents via e-mail by specifying the recipient's e -mail ad- dress (Internet Fax Transmission). You can receive sent documents via Internet Fax, or from compu ters (Internet Fax Recepti on).
vi Using the Scanner in a Network Environment You can use a scanner over the network. • You can send scan files to a specified destination using e-mail(Sending scan file by e-mail).
vii Administrating the Machine/Prot ecting Documents (Security Functions) You can prevent information leakage by managing the mach ine and protecting documents. • You can protect documents from unauth orized access and stop them from be- ing copied without permi ssion.
viii Monitoring the Machine Via Computer You can change th e machine's settings an d monitor its status from a connected computer. Web Image Monitor lets you configure and oper ate the machine us ing the Web browser on a computer. You can also install S martDeviceMonitor for Admin on a computer to configure and operate the machine.
ix Preventing an Unauthorized Copy You can print embedded pattern on paper to prevent them from being copied. • Using the printer driver, you can embe d a pattern in a printed document.
x TABLE OF CONTENTS Manuals for This Machine .............................................. ........................................ i What You Can Do with This Machine .................................................................. iii Copier, Facsimile, Printer, and Scanner Functi ons .
xi 3. Appendix Dos and Don'ts ..................................................... ........................................... ..... 39 Saving Color Copies .............. .............. ........... .............. ............ ........... .......
xii.
1 Notice Notice To Wireless LAN In terface (option) Users Notes to users It is strictly forbidden to use a ntenna(s) except designated. A The antenna(s ) of this dev ice must not be co-located or operating in conjunc- tion with any other antenna or transmitte r.
2 Note to users in Canada Note: This Class B digital apparatus co mplies with Canadian ICES-003 . Operation is subject to th e following two conditions: (1) This device may not cause interference , and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
3 Remarque concernant les utilisateurs au Canada Avertissement: Cet appareil numérique de la classe B es t conforme à la norme NMB-003 du Can- ada. L'utilisation de ce dispositif est autorisée.
4 How to Read This Manual Symbols This manual uses the foll owing symbols: Indicates important sa fety notes. Ignoring these notes could resu l t i n s e r i o u s i n j u r y o r d e a t h . B e s u r e t o r e a d t h e s e notes. They can be found in the “Safet y Information” section of this manual.
5 Safety Information When using this machine, the following sa fety precautions should always be fol- lowed. Safety During Operation In this manual, the following important symbols are us ed: R WARNING: Indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury.
6 R CAUTION: • Protect the mach ine from dampne ss or wet weathe r, such as rain and snow. • Unplug the power cord from the wall outlet before you move the machine. While moving the machine, you sh ould take care that the power cord will not be damaged und er the machine.
7 R CAUTION: • During operation, ro llers for transporti ng the paper and originals revolve. A safety device is being inst alled so that the machine can be operated safely. But take care no t to touch the mac hine during operation. A n injury might oc- cur.
8 ENERGY STAR Program ❖ Sleep mode This machine automaticall y reduces its power consum ption if you do not use it for a while (default setting: 1 min). This is called “Sleep mode” in ENERGY STA R P ro gr am . Pr i nti ng fr om you r c om pu te r o r of in co mi ng fax is av ai la bl e in this mode.
9 1. Getting Started This section descr ibes how to start using this machine. Guide to Components This section introdu ces the names and functions of the comp onents. 1. Exposure glass cover (optional), ADF (optional), or ARDF (optional) (The illustration shows the ADF.
Getting Started 10 1 1. Control panel angle adjustment button Allows you to adjust the angle of the con- trol panel. 2. Bypass Tray Use this to print on plain, thick, or cus- tom-size paper. 3. One-sheet bypass tray Use this to print on plain, thick, or cus- tom-size paper, or OHP transparen cies.
Guide to Components 11 1 1. Main power switch If the machine is not pow ered on after pressing the Operation switch, check that the main power switch is turned on. If it is off, turn it on. Control Panel Angle Adjustment Button By pressing the co ntrol pa nel angle adju stment button , you can adju st the til t of the control panel.
Getting Started 12 1 B Tilt the control panel upwards, and then release the adjustment button to lock the panel. C To tilt the control panel downwards, press the adjustment button to unlock the panel, and then gently adjust it until it locks into position.
Guide to Components 13 1 Output Tray Guide If printed sheets come out curled, pull up the Output Tr ay Guide. ❖ Using the Output Tray Guide Pull up the Output Tray Guide until it clicks. ❖ Pushing in the Output Tray Guide Push in the Output Tray Guide.
Getting Started 14 1 Options This section in troduces the na mes an d functions of main optional parts. External Options This section provides explanations about external options. 1. Exposure Glass Cover Lower this cover over originals. 2. ADF Place stacks of orig inals he re.
Guide to Components 15 1 Internal Options This section descr ibes the option s th at can be installed in the machine. •F a x u n i t Allows you to use the fax function. •F u n c t i o n U p g r a d e O p t i o n Allows you to copy on both side s of a sheet (c olor), and use sort (color) func- tion in copier mode.
Getting Started 16 1 Control Panel This illustration shows the control panel of the machine with options fully in- stalled. 1. Communicating indicator Lit during data transmission or recep- tion. 2. Receiving F ile indicator (facsimi- le mode) Remains lit when fax memory receives a file.
Control Panel 17 1 13. { Clear/Stop } key •C l e a r : Clears an entered numeric value. •S t o p : Stops a job in progress, such as scan- ning, faxing, or printing. 14. Main power indicator The main power indicator l ights when the main power switch is turned on.
Getting Started 18 1 30. Quick Dial Flip Plate Tilt the plate downward to change from { Quick Dial 01 } key to { Qu ick Dial 16 } key. Tilt the plate upward to change from { Quick Dial 17 } key to { Quic k Dial 32 } key. 31. { Job Information } key (scanner and facsimile mode) Press to obtain status info rmation on transmitted data.
Display 19 1 Display The display panel shows machine status , error messages, and function menus. When you select or specify an item on the display panel, it is highlighted like . Important ❒ A force or impact of more than 30 N (about 3 kgf) will damage the displ ay.
Getting Started 20 1 When the Authentication Screen is Displayed When Basic Authentication, Wi ndows Authentication, LDAP Auth entication, or Integration Server Authentication is enab led, the authentication screen appears. The machine is operable only if you enter a valid user name and password.
When the Authentication Screen is Displayed 21 1 Login (Using the Control Panel) Use the following procedure to log in when Basic Authentication, Windows Au- thentication, LDAP Authen tication, or In tegration Server Authenticati on is ena- bled. A Enter the login user name and then press the { OK } key.
Getting Started 22 1 Login (Using a Printer Driver) If Basic Authentication, Windows Authen tication, LDAP Authentication , or In- tegration Server Authentication is enab led, make encryption settings in the properties screen of the driver, and th en specify a login user name and pass- word.
Changing Modes 23 1 Changing Modes Note ❒ You cannot switch mode s during initial setup. ❒ The copying screen is displayed as default after power on. You can change this default setting. For the setting pr oc edure, see “Fun ction Priority”, Gene r- al Settings Guide.
Getting Started 24 1 Turning On the Power This section discusses how to turn on/off the power. ❖ Power supply This machine has two power switches : Operation switch and main power switch. • Operation switch (right side of the control panel) Press to activa te the machine.
Turning On the Power 25 1 Note ❒ Do not turn off the main power switch immediately after turning it on. Do- ing so may result in damage to the ha rd disk or memory or nozzle clogging due to dried head, lead ing to malfunctions. ❒ When the message “ Restart is required due to a functional er- ror.
Getting Started 26 1 Turning Off the Power Turn off the power as follows: A Make sure the exposure glass cover, ADF or ARDF are lowered. B Press the Operation switch.
Turning On the Power 27 1 Turning Off the Main Power Turn off the main power as follows: Important ❒ If the machine's operation switch is li t or flashing, do not turn of f the ma- chine's main power switch. Doing so might damage th e hard disk or memory, leading to malfunctions.
Getting Started 28 1 Saving Energy This machine ha s the following energy saving f unction. ❖ Auto off This machine automatically enters Sl eep Mode and reduces its power con- sumption if you do not u se it for a wh ile. This function is called “Auto off”.
29 2. Entering Text This section descr ibes how to enter characters. Entering Text When you enter a character, it appears a t the cursor position. If there is a char- acter already at the curso r position, th e newly entered character appears before it.
Entering Text 30 2 ❖ Number keys Use to enter numbers. ❖ { Quick Dial 01/17 } key to { Quick Dial 09/25 } key (A to Z) Press these to enter upper and lower case letters.
Entering Text 31 2 Entering letters A Press the { Shift } key to switch between uppercase and lowercase. B Press a Quick Dial key. A letter is entered and the cursor moves along one space.
Entering Text 32 2 ❖ Keyboard Type B Press one of the followi ng Quick Dial keys to display a basic letter, and then press { Quick Dial 16/32 } to select one of its variations.
Entering Text 33 2 ❖ Keyboard Type C This keyboard type allows you to en ter Polish, Hungarian, and Czech let- ters. To display a basic letter, press the corresponding Quick Dial key indi- cated in the table below. Select its variant form by then pressing { Quick Dial 16/32 } .
Entering Text 34 2 ❖ Keyboard Type D This keyboard ty pe allows you to enter Russian letters. Press the { Shi ft } key to enter Cyrillic character mode. To enter a letter, press the corre- sponding Quick Dial key indicated in the table below. Keep pressing the key until the re quired letter is displayed.
Entering Text 35 2 C Press the { OK } key. This will enter the symbol and shift the cursor. Depending on the selected k eyboard type, you ca n enter the fol lowing sym- bols.
Entering Text 36 2 ❖ Keyboard Type C ❖ Keyboard Type D AMA033S AMA034S.
Entering Text 37 2 Entering numbers A Press the number keys. The numeral is ent ered and the curso r moves. Deleting characters A Press {W} or {V} to move the cursor to the character to delete. B Press the { Clear/Stop } key. This will delete the character at the cursor position.
Entering Text 38 2 Selecting a User Text You can select and use a User Text that is registered in [ Prog/Change/Del User Text ] . For details about registering User Te xts, see “Program/Change/Delete User Text”, General Settings Guide. A Press the { Shift } key to display [ User Text ] .
39 3. Appendix This section descri bes Dos and Don'ts and copy paper. Dos and Don'ts The following items should be foll owed during use of this machine. R WARNING: R CAUTION: Important ❒ If the machine's operation switch is li t or flashing, do not turn of f the ma- chine's main power switch.
Appendix 40 3 ❒ A change in temperature or humidity may cause condensation to form, which can affect print quality. ❒ By using the option al anti-condensatio n heaters, you can minimize condensa- tion when using the machine in a c limate where daytime and nighttime tem- peratures differ greatly.
Software and Utilities Included on the CD-ROM 41 3 Software and Utilities Included on the CD- ROM Three CD-ROMs come with th is machine: “Printer Driv ers and Utilities”, “Scan- ner/PostScript Drivers and Utilities”, an d “Manuals”. PS Driver is stored in “Scanner/PostSc ript Drivers and Utilities”.
Appendix 42 3 Viewing the contents of the CD-ROM Follow the procedure below to view the contents of the CD-ROMs. A Insert the CD-ROM into the CD- ROM drive. The installer starts. B Click [ Browse This CD-ROM ] . Explorer starts an d displays the co ntents of the C D-ROM.
Software and Utilities Included on the CD-ROM 43 3 *12 The Adobe PostScript 3 printer drivers and PostScript Printer Descripti on (PPD) files are included on the CD-ROM labeled “Sca nner/PostScript Drivers and Utilities”.
Appendix 44 3 TWAIN Driver This section describes the file path to and system requirem ents of the TWAIN driver. T h i s d r i v e r is r e q u i r e d t o s ca n a n o r i g inal using a scanner. To use the machine as a n etwork TW AIN scan ner, th is driver must be installed.
Software and Utilities Included on the CD-ROM 45 3 LAN-Fax Driver This driver allows you to use LAN-Fax functions. ❖ File path The following folders are on the CD-R OM labeled “Scanner/PostScript Driv- ers and Utilities”: • LAN-Fax Driver for Windows 98/Me DRIVERSLAN-FAXWIN9X_ME • LAN-Fax Driver for Windows NT 4.
Appendix 46 3 DeskTopBinder Lite This section explains the file path an d system requirements of DeskTopBinder Lite. DeskTopBinder is to be in stalled on th e client computers for integration and management of various kinds of files such as scan file s, files created with appli- cations, and existing scan files.
Software and Utilities Included on the CD-ROM 47 3 SmartDeviceMonitor for Admin SmartDeviceMonitor for Admin is an application that uses TCP/IP and IPX/SPX to monitor network printers. It can monitor multiple network printers using IP address. We recommend that ne twork administrators use this applica- tion.
Appendix 48 3 DeskTopBinder-SmartDeviceMonitor for Client DeskTopBinder-SmartDeviceMon itor for Client allows you to manage and print various data such as files creat ed with an application, images sca nned with a scanner, and existi ng im ages as one document.
Installing the Operating Instructions 49 3 Installing the Operating Instructions The supplied “Manuals” CD-ROM contains HTML-format manuals. Install the manuals you want to use.
Appendix 50 3 PDF Manuals The supplied CD-ROM cont ains PDF versions of the HTML user man uals. ❖ File path The PDF manuals are in the following folders on the CD-ROM: • About This Machine PDF MAN.
Opening the Installed Operating Instructions 51 3 Opening the Installed Operating Instructions This section ex plains how to open installed manuals. Opening from the Icon This section expl ains how to ope n a manual using its desk top icon. A Double-click the icon on your desktop.
Appendix 52 3 Opening from the CD-ROM This section ex plains how to op en a manual from the supplied CD-ROM. A Click [ Read manuals ] . B Click the title of the manual you want to view.
Copy Paper 53 3 Copy Paper This section describes reco mmended paper sizes and types, unusable pap er, and paper storage. Recommended Paper Sizes and Types The following limit ations apply to each tr .
Appendix 54 3 ❖ Bypass tray *1 Press the { q } key, and then select the size of the paper loaded in the tray. *2 Press the { q } key, select [ Custom Size ] , and then specify the custom paper size using the number keys. *3 Not usable under the printer function.
Copy Paper 55 3 ❖ One-sheet bypass tray *1 Press the { q } key, and then select the size of the paper loaded in the tray. *2 Press the { q } key, select [ Custom Size ] , and then specify the custom paper size using the number keys. *3 Not usable under the printer function.
Appendix 56 3 ❒ To prevent m isfeeds, when lo ading OH P transparencies, check both sides of the sheets, and place them correctly. ❒ When loading OHP transparencies, select [ OHP (Transparency) ] as the paper type for the One-sheet bypass tray. For details, see “Copyi ng from the Bypass Tray”, Copy Reference.
Copy Paper 57 3 Unusable Paper This section descri bes paper unusable on this machine. R CAUTION: Important ❒ To prevent faults, do not use any of the following kinds of paper: • Thermal fax paper.
58 INDEX A ADF , 14 ARDF , 14 Auto off , 28 B Bluetooth unit , 14 Bypass Tray , 9 C CAUTION , 5 Characters , 29 Check Destination key , 16 Clear Modes key , 16 Clear/Stop key , 16 , 29 Color , 40 Colo.
59 N Network , vi Number keys , 29 O OK key , 16 One-sheet bypass tray , 9 One sheet output tray , 9 On Hook Dial key , 16 Opening from the CD-ROM , 52 Opening from the Icon , 51 Opening from the Star.
60 EN USA B229-7787.
In accordance with IEC 60417, this machine uses the fol lowing symbols for the main power switch: a means POWER ON. b means POWER OFF. Copyright © 2005.
Operating Instructions About This Machine Type for SGC 1506/GS 106/LD215c/Aficio 615C EN USA B229-7787.
An important point after buying a device Ricoh 615C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ricoh 615C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ricoh 615C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ricoh 615C you will learn all the available features of the product, as well as information on its operation. The information that you get Ricoh 615C will certainly help you make a decision on the purchase.
If you already are a holder of Ricoh 615C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ricoh 615C.
However, one of the most important roles played by the user manual is to help in solving problems with Ricoh 615C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ricoh 615C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
