Instruction/ maintenance manual of the product ABM-4161 RF-Link
Go to page of 9
1 RF-Link 2.4GHz Digital Wireless Color Security/Baby Monitor Model: ABM-4161 User's Manual.
2 Package Content Camera x 1 Monitor x 1 Power Adapters x 2 Battery for Monitor ( 3.7V 1000mAH Li-ion ) x 1 User's Manual x 1 Figures and Quick Guide Product Layout Monitor (Fig. 1) 1. LCD screen 2. Antenna 3. VOX: Voice Operated Transmission button 4.
3 Camera (Fig. 2) 1. Antenna 2. Power indicator LED 3. Infrared LEDs 4. Lens 5. Supporting stand 6. Night-light button 7. Night-light 8. Microphone 9.
4 Set Up Camera Setup 1.1 Power Supply Loading the Batteries (See Fig. 3) 1. Loosen the screw on the bottom of the ca mera by u sing a screw driver. (Step 1 ) 2. Open the battery compartment cover. (Step 2 ) 3. Insert 4 AAA-size batteries (follow the plus (+) a nd minus (-) signs ins ide the battery compartment).
5 1.2 Fine Tuning (See Fig. 5) Place the camera in a convenient location, point the lens to wards the observatio n area and adjust the angle by rotating the lens head. 1.3 Night light (See Fig. 6) Press the night light button, the night light LEDs will remain ON.
6 1.4 Night vision The camera has nine high-inten sity LEDs for picking up clear im ages in the dark. When the built-in photo sen sor detects low ambient light levels, the LEDs will automatically activate. Monitor Setup 2.1 Power Supply Loading the Battery (See Fig.
7 Note 3: "OUT OF RANGE" would be displ ayed on the LCD screen if the monitor is exceeds the range. (See Fig. 9 ) 2.2 Brightness Setti ng (See Fig. 10) Adjust the Brightness selection button / to adjust brightness. 2.3 VOX (voice-operated transmission) Function (See Fig.
8 Troubleshooting You don't get a signal at all • Make sure the camera a nd the monitor are turned on. • Make sure the power plug s are pushed all the way in. • If the camera/monitor is powered by batteries, repl ace all batteries with new ones.
9 • Do not attempt to open the case. Non-expert handli ng of the device may damage the system. • Avoid dropping or strong shocks. • Operate this product using only with the power supply included or p rovided as an accessory. • Do not overload electrical outlets or extensi on cord s this can result in fire or electric s hocks.
An important point after buying a device RF-Link ABM-4161 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought RF-Link ABM-4161 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data RF-Link ABM-4161 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, RF-Link ABM-4161 you will learn all the available features of the product, as well as information on its operation. The information that you get RF-Link ABM-4161 will certainly help you make a decision on the purchase.
If you already are a holder of RF-Link ABM-4161, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime RF-Link ABM-4161.
However, one of the most important roles played by the user manual is to help in solving problems with RF-Link ABM-4161. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device RF-Link ABM-4161 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
