Instruction/ maintenance manual of the product M3T-FLX-100NSD Renesas
Go to page of 4
(1/4) M3T-FLX-100NSD Converter Board for Connect ing FLX100 to 100-pin 0.5-mm-pitch LQFP User’s Manual Keep safety first in your circuit designs! z Renesas Technology Corporation and Renesas Solutio.
(2/4) 1. Outline The M3T-FLX-100NSD is a converter board for connecting the 160-core flexible cable FLX100 to a foot pattern for 100-pin 0.5-mm-pitch LQFP (100P6Q-A). 2. Package Components (See Figure 1) (1) M3T-FLX-100NSD conve rter board ...........
(3/4) 5. Connection Procedure (See Figure 3) The procedure for conn ecting the M3T-FLX-100NSD is shown below. (1) Mount the NQPACK100SD- ND on the user system. (2) Attach the YQPACK100SD on the NQPACK100SD-ND. (3) Secure th e four corners of the YQPACK100SD with the YQ-GUIDE's.
(4/4) 7. Precautions CAUTION Caution to Be Taken for This Product: z When connecting the YQPACK100SD, be sure to use th e included YQ-GUIDE's. z Do NOT use the screws included with the YQPACK100SD for connecting th e YQPACK100SD. IMPORTANT Notes on This Product: z We cannot accept any request fo r repair.
An important point after buying a device Renesas M3T-FLX-100NSD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Renesas M3T-FLX-100NSD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Renesas M3T-FLX-100NSD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Renesas M3T-FLX-100NSD you will learn all the available features of the product, as well as information on its operation. The information that you get Renesas M3T-FLX-100NSD will certainly help you make a decision on the purchase.
If you already are a holder of Renesas M3T-FLX-100NSD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Renesas M3T-FLX-100NSD.
However, one of the most important roles played by the user manual is to help in solving problems with Renesas M3T-FLX-100NSD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Renesas M3T-FLX-100NSD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
