Instruction/ maintenance manual of the product M3T-42DIP-DMS Renesas
Go to page of 3
( 1 / 3 ) M3T -42DIP-DMS Converter Board for Connecting 42P4B to 42P2R User's Manual Keep safety first in your circuit designs! • Renesas Technology Corporation and Renesas Solutions Corporatio.
( 2 / 3 ) 1. Outline The M3T-42DIP-DMS is an accessory tool product which converts 42P4B package (42-pin 1.778-mm-pitch SDIP) to 42P2R package (42-pin 0.8-mm-pitch SSOP). It is used with the M3T-DCT42B-450 or M3T-SSOP42B-450. 2. Package Components (see Figure 1) (1) M3T-42DIP-DMS (2) M3T-42DIP-DMS User's Manual (This manual) 3.
( 3 / 3 ) 7. Precautions CAUTION Caution to Be Taken for This Product: •B efore mounting the M3T-42DIP-DMS, be sure to check its No. 1 pin position. 8. Correspondence of Connectors J1, J2 Table 2 lists the correspondence of connectors J1, J2. Table 2 Correspondence of connectors J1, J2 (NC: No connection) Pin No.
An important point after buying a device Renesas M3T-42DIP-DMS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Renesas M3T-42DIP-DMS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Renesas M3T-42DIP-DMS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Renesas M3T-42DIP-DMS you will learn all the available features of the product, as well as information on its operation. The information that you get Renesas M3T-42DIP-DMS will certainly help you make a decision on the purchase.
If you already are a holder of Renesas M3T-42DIP-DMS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Renesas M3T-42DIP-DMS.
However, one of the most important roles played by the user manual is to help in solving problems with Renesas M3T-42DIP-DMS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Renesas M3T-42DIP-DMS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
