Instruction/ maintenance manual of the product M38C29T-ADF Renesas
Go to page of 8
M38C29T-ADF Temporary Target Board for M38C29RLFS User’s Manual Keep safety first in your circuit designs! Renesas Technology Corporation and Renesas Solutions Corporati on put the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them.
1. Things to Check When Unpacking The M38C29T-ADF package consists of the following produ cts. Wh en unpa cking your p ackage, check to see tha t all of t hese components are included. If you find any item missing or faulty, or any suggestion, contact your local distributor.
(3/8) 4. Setting Up This chapter describes how to set up the M38C29T-ADF. (1) Mount the emulator MCU on the M38C29T-ADF. After checking the position of the No. 1 pin of the emulator MCU, mount th e emulator MCU referencing Figure 4 .1. (2) Insert the connector on the tip of the emul ator probe to the socket on th e emulator MCU.
(4/8) (3) Connect the RESET cable (white) and the GND cable (black) of the emulation pod to the RESET (TP3) pin a nd Vss (TP2) pin of the M38C29T-ADF respectively. And connect the Vcc cable (red) to th e Vcc (TP1) pin. (4) Set the MCU type select switch of the M38000T2-CPE to the RLSS side.
(5/8) (6) Setting SW Set the SW1 to S W4 according to your application. T able 4.2 describes th e functions of the SW1 to SW4. Table 4.2 Functions of the SW1, SW 2, SW3 and SW4 of the M38C29T-ADF No. Name Function Factory-setting SW1 PORT/XCIN Allows y ou to choose whether to supply the sub-clock signals (32.
(6/8) 5. Oscillator Circuit 5.1 Oscillator Circuit Board The M38C29T-ADF has a built-in oscillato r circuit board on which a 4.0MHz oscillator is mounted. Figure 5.1 shows an external v iew of the OSC-2 oscillator circui t board (bare board) and wh ere connector pins are located.
(7/8) 6. Reset Circuit Figure 6.1 shows the reset circuit and its wav eform. In this pr odu ct, reset is cleared in about 100ms from the instan t Vcc pass es about 2.1V after having started from 0 V. When Vcc dr ops down to abou t 2.1V, reset tur ns effective.
(8/8) 7. Pin Layout Figure 7.1 shows the pin layout of the M38C29T-ADF. J2 -5 7 J2 -7 5 J1 -8 0 J2-47 J1 -7 8 J1 -8 5 J1 -8 2 48 49 50 J2-50 J2-48 NC Vc c J2- 46 J1- 1 J1- 2 J1- 4 J1- 3 J1- 5 J1- 6 J1.
An important point after buying a device Renesas M38C29T-ADF (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Renesas M38C29T-ADF yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Renesas M38C29T-ADF - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Renesas M38C29T-ADF you will learn all the available features of the product, as well as information on its operation. The information that you get Renesas M38C29T-ADF will certainly help you make a decision on the purchase.
If you already are a holder of Renesas M38C29T-ADF, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Renesas M38C29T-ADF.
However, one of the most important roles played by the user manual is to help in solving problems with Renesas M38C29T-ADF. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Renesas M38C29T-ADF along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
