Instruction/ maintenance manual of the product FP-64E Renesas
Go to page of 30
2003.12.19 H8/36014 Group, H8/36024 Group FP-64E User System Interface Cable for E6000 Emulator User’s Manual HS36014ECH61H Renesas Micro computer Development Environmen t System Rev.
Cautions Keep safety first in your circ uit desi gns! 1. Renesas Technology Corp . puts the maximum e ffort int o making s emiconducto r product s better and more reliable, but the re is always the poss ibility that trouble may occ ur with them. Trouble with semi conductors may lead t o personal i njury, fire or propert y damage.
I IMPORTANT INFORMATION READ FIRST • READ this user's manual before using this u ser system interface cable. • KEEP the user's manual handy for future reference. Do not atte m pt to use the user sy stem interface cable until y ou fully understa nd its mec ha ni s m.
II LIMITED WARRANTY Renesas warrants its user system interface cabl es to be manufactured in accordance with published specifications and free from defects in material and/or workmanship. Renesas will re pair or replace any user system interfac e cables dete rmined to be defective in material and/or workmanship.
III State Law: Some states do not allo w the exclusion or limitatio n of implied warranties or liabilit y for incidental o r consequential d amages, so t he ab o ve limitation or excl usion ma y not appl y to you. This warr ant y give s yo u spec if ic lega l rig hts, and you ma y have other rig hts wh ic h may va ry fro m state to state.
IV SAFETY PAGE READ FIRST • READ this user's manual before using this u ser system interface cable. • KEEP the user's manual handy for future reference. Do not atte m pt to use the user sy stem interface cable until y ou fully understa nd its mec ha ni s m.
V W ARNING Observe the pr ecautions listed below. Failur e to do so will result in a FIRE HA ZARD and will damage the user system and the emula tor product or will result in PERSONAL INJURY. Th e USER PROGRAM will be LOST. 1. Do not repair or remodel the emulator product b y yourself for e lectric sho ck prevention and quality assurance.
i Preface Thank y ou for purchasi ng th is user s ys tem in terface cable (HS36014ECH61H) for the R enesas’s origin al microcom puter H8/36014 series.
ii Contents Section 1 Configuration .................................................................................... 1 Section 2 Connection Procedures ...................................................................... 3 2.1 Connectin g User Sys tem Interface C able to Emu lator Station (H8/36014 Series) .
1 Section 1 Configuration CAUTION Use an IC149-064- 075-B51 socket ( manufactured by YAMAICHI ELECTRONICS Co., Ltd.) for the FP-64E package IC socket on th e user system. Figu re 1 show s the config uration of the HS36014EC H61H user sy stem in terface cable for the FP-64E package.
2 Table 1 lists t he HS36014ECH61H com ponents . Please mak e sure y ou have all of th ese compon ents when u npacking. Table 1 HS36014ECH61H Com ponents No.
3 Section 2 Connection Procedures 2.1 Connectin g User System Interface Cable to Emulator S tation (H8/36014 Series) W ARNING Observe the precautions listed below. Failure t o do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJURY.
4 Figure 2 Connecting User System Interface Cable to Em ulator Station.
5 2.2 Connectin g User System Interface Cable to Ex pansion I/O Board (H8/36024 Series) W ARNING Always switch OFF the user syst em and the emulator product before the USER SYSTEM INTERFACE CABLE is connected to or removed from any part . Before connecting, make sure that pin 1 on bot h sides are correctly aligned.
6 Cable body connector User system interface cable CTS screws (M3 x 6 mm) Expansion I/O board cable USER INTERFACE CABL E6000 EMULATO E6000 Figure 3 Connecting User System Interface Cable to Expansion.
7 2.3 Connectin g User System Interface Cable to User S ystem W ARNING Always switch OFF the user syst em and the emulator product before the USER SYSTEM INTERFACE CABLE is connected to or removed from any part . Before connecting, make sure that pin 1 on bot h sides are correctly aligned.
8 2.3.3 I nserting Cable Head CAUTION Check the location of pin 1 before inserting. Align pin 1 on the IC socket for an FP-64E package on the user sy stem w ith pin 1 on the user system interface cable head, and in sert the user system interface cable head into th e IC socket on the user sy stem, as show n in figure 4.
9 Fasten the us er system interf ace cable head to the IC socket for an FP-64E package on th e user system with the four screws (M2 x 12 mm ; with four flat w ashers) provided. Each s crew should be tighten ed a little at a time, altern ating between s crews on opposin g corners.
10 2.3.5 Fastening Cable B ody Connect the cable body t o the cable head. Figure 5 Fastening Cable Body.
11 2.4 Reco mm ended Dime nsions for User System Mount Pad Figure 6 show s the recomm ended dimens ions for the mou nt pad (footprin t) for the user system w ith an IC socket for an F P -64E pack age (IC149- 064-075-B51: m anufactured by YAMAIC HI ELECTRONICS C o.
12 2.5 Dimensions f or User System Interface Cable H ead The dimens ions for the user sy stem interface cable h ead are shown in f igure 7. Figure 7 Dim ensions for User System Interface Cable Head.
13 2.6 Resulting Di mensions after Conn ecting User System Interface Cab le The resulting dim ensions, after connectin g the user system interface cable head to the u ser system , are show n in figure 8.
14 Section 3 Installing the MCU to the User System CAUTION 1. Check the locat ion of pin 1 before inserting. 2. Use a Philips-type screwdriver whose head matches the screw head.
15 Figure 9 Installing M CU to User System.
16 Section 4 Verifying Operation 1. When u sing the H8/ 36014 series E6000 em ulator (HS3664EPI61H), tu rn on the em ulator according to th e procedures described in the H8/300H Series E6000 Emu lator User's Manual (HS300HEPI61HE).
17 Figure 10 sh o ws the system clock oscillator o n the user system interface cable. Figure 10 System Clock Oscillator.
18 Section 5 Notice 1. Make sure that pin 1 on the user system IC socket is correctly aligned w ith pin 1 on the cable head before insertin g the cable head into the us er system IC sock et. 2. The dimens ions of th e recommen ded moun t pad for the user sy stem IC socket are diff erent from those of th e MCU.
19 6. The P1 short connector is used f or testing. Do not rem ove the inserted jumper pin. Figure 12 P1 Short Connector.
H8/36014 Group, H8/36024 Group FP-64E User System Interface Cable for E6000 Emulator User's Manual Publication Date: Rev.1.00, March 18, 2002 Rev.2.00, December 19, 2003 Published by: Sales Strategic Planning Div. Renesas Technology Corp. Edited by: Technical Documentation & Information Department Renesas Kodaira Semiconductor Co.
H8/3601 4 Grou p, H8/3 6024 Group FP -64E User Sy stem I nterface Cable for E 6000 Emulato r User’ s Manual REJ10B0091-0200H.
An important point after buying a device Renesas FP-64E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Renesas FP-64E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Renesas FP-64E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Renesas FP-64E you will learn all the available features of the product, as well as information on its operation. The information that you get Renesas FP-64E will certainly help you make a decision on the purchase.
If you already are a holder of Renesas FP-64E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Renesas FP-64E.
However, one of the most important roles played by the user manual is to help in solving problems with Renesas FP-64E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Renesas FP-64E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
