Instruction/ maintenance manual of the product FP-144F Renesas
Go to page of 31
2004.1.29 SH7145 Group FP-144 F User System Interfa ce Board HS7145ECH61H User’s Manual Renesas M icrocomput er Developm ent Enviro nment System SuperH TM Family /SH7144 S eries Rev.
Cautions Keep safety first in your circ uit designs! 1. Renesas Technology Corp. put s the maximum e ffort i nto making semi conductor pr oducts better and more reliable, but the re is always the possibility that trouble may occur with them. Trouble with semi conductors may l ead to personal i njury, fire or property dama ge.
I IMPORTANT INFORMATION READ FIRST • READ this user's manual before using this u ser system interface cable. • KEEP the user's manual handy for future reference. Do not atte m pt to use the user system interface ca ble until you fully under stand its mec ha ni s m.
II LIMITED WARRANTY Renesas warrants its user system interface cabl es to be manufactured in accordance with published specifications and free from defects in material and/or workmanship. Renesas will re pair or replace any user system interfac e cables determined to be defective in material and/or workmanship.
III State Law: Some states do not allo w the exclusion or limitatio n of implied warranties or liabilit y for incidental o r consequential d amages, so t he ab o ve limitation or excl usion ma y not appl y to you. This warr ant y give s yo u spec if ic lega l rig hts, and you ma y have ot her rig hts wh ic h may va ry fro m state to state.
IV SAFETY PAGE READ FIRST • READ this user's manual before using this u ser system interface cable. • KEEP the user's manual handy for future reference. Do not atte m pt to use the user system interface ca ble until you fully under stand its mec ha ni s m.
V W ARNING Observe the pr ecautions listed below. Failure to do so will result in a FIRE HA ZARD and will damag e the user system and the emula tor product or will result in PERSONAL INJURY. Th e USER PROGRAM will be LOST. 1. Do not repair or remodel the emulator product b y yourself for e lectric shock pr evention and qualit y assurance.
i Preface The HS7145ECH61H is a u ser sys tem in terface board that conn ects a user s ystem for th e SH7145 FP-144F pack age to the S H7046 E6000H emu lator (HS7046EPH60H).
ii Contents Section 1 Configuration ..................................................................................... 1 Section 2 Environmental Conditions ................................................................. 3 2.1 Setting Operating Voltage and Operating Frequency .
1 Section 1 Configuration Figure 1 and table 1 sh ow th e configu ration and com ponents of th e user system interf ace board for the FP-144F package. Please m ake su re you have all of these com ponents wh en unpack ing. Socket cover Screws (M2.0 x 6 mm) EV-chip board Board User system Spacer IC socket Screws (M2.
2 CAUTION Use a NQPACK144SD socket (manufactured by Tokyo Eletech Corporation ) for the FP-144F package IC socket on the user system. Table 1 HS7145ECH61H Compon ents No.
3 Section 2 Environm ental Conditions Maintain the conditions in tab le 2 wh en using the emulator. Table 2 Environmental Conditio ns Item Specifications Temperature Operating: +10 to +35°C Storage: -10 to +35°C Humidity Operating: 35 to 80% RH, no condensation Storage: 35 to 80% RH, no condensation Vibration Operating: 2.
4 Section 3 Product Specifications The specifications of this product are show n in table 3. Table 3 Product Specifications Item Specifications Target processor SH7145F Package FP-144F Function Level limitation: This function keeps the output signal from 3-V emulator system equal to or less than power supply voltage of the user system (Vcc).
5 Section 4 User Interface Specifications The user sy stem interface board incorporates a lev el conversion circuit supporting a low- voltage circuit. Accordin gly , when connecting the user sy stem to th e emul ator, pay attention to the signal delays an d the num ber of FA NINs and FANOUTs.
6 (3) AVcc, AVss, AN7 to AN0, and AVref Emulator User system Emulator User system AN7 to AN0 Vss A Vss QS3384 5Vcc A Vcc Figure 5 User System Interface Circuit for AVcc, AVss, AN7 to AN0, and AVref (4.
7 (5) UVcc and UVss Emulator User system QSVcc Vss UVss UVcc V oltage detection circuit 5Vcc Figure 7 User System Interface Circuit for UVcc and UVss Note: UVcc and UVss represent Vcc and Vss on a user system. 5Vcc and QSVcc represent Vcc generated in the user system interface cable.
8 Section 5 Connection Procedures 5.1 Connectin g User System Interface Board to User S ystem W ARNING Always switch OFF the user syst em and the emulator product before the USER SYSTEM INTERFACE BOARD is connected to or removed from any part . Before connecting, make sure that pin 1 on bot h sides are correctly aligned.
9 5.1.2 Installing Cable Hea d CAUTION Check the location of pin 1 before inserting. Alig n pin 1 on the IC s ocket for an FP-144F packag e on the u ser sy stem w ith pin 1 on the u ser system interface board, an d insert the us er system interface board into th e IC socket on th e user system , as shown in figure 8.
10 Screws (M2.0 x 10 mm) Pin 1 Board IC socket (NQPACK144SD manufactured by Tokyo Eletech Corporation) User system Figure 8 Connecting User System Interface Board to User System.
11 5.2 Connecting User System Interface Board to EV-Chip Board W ARNING Observe the precautions listed below. Failure t o do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJURY. The USER PROGRAM will be LOST.
12 Connector No. UCN1 UCN1 UCN2 UCN2 Board EV-Chip Board Connector No. Board Connector No. EV-chip board Spacer User system Figure 9 Connecting User System Interface Board to EV-Chip Board.
13 5.3 Reco mm ended Dim ensions for User System Mount Pa d (Footpr int) Figure 10 show s the recom m ended dimen sions for the m ount pad (f ootprint) for the u ser system w ith an IC s ocket for an F P-144F package (NQPA CK144SD: m anuf actured by Tokyo Eletech Corporatio n).
14 5.4 Dim ensions for EV-Chip Boar d and User Syste m Inte rface Board The dimens ions for the EV- chip board and the u ser system interf ace board are shown in figu re 11. 140.0 116.0 Unit: mm Tolerance: ±0.5 mm EV-chip board User system interface board 19.
15 5.5 Resulting Di mensions after Conn ecting User System Interface B oard The resulting dim ensions, af ter connecting th e user system interf ace board to the user sy stem, are shown in figure 12 . EV-chip board 11.5 Unit: mm Tolerance: ±1.0 mm User system 31.
16 Section 6 Installing the MCU to the User System CAUTION 1. Check the locat ion of pin 1 before inserting. 2. Use a Philips-type screwdriver whose head matches the screw head.
17 MCU (SH7145) Screws (M2.0 x 6 mm) Socket cover Pin 1 User system IC socket (NQPACK144SD manufactured by Tokyo Eletech Corporation) Figure 13 Installing M CU to User System.
18 Section 7 Verifying Operation 1. Turn on the em ulator accordin g to the procedures described in the SH 7046 E6000H Emul ator User's Manual (HS 7046EPH60HE).
19 To use the crystal oscillator mounted on the EV-chip board Install a crystal oscillator into the crys tal oscillator terminals on the EV-chip board.
20 Section 8 Notice 1. Before connectin g any parts or cables, make su re that pin 1 on th e both sides are correctly aligned. 2. Do not apply excessive force to the u ser system interface board w hile it is con nected to the user system .
SH7145 Group FP-144F User System Interface Board HS7145ECH61H User's Manual Publication Date: Rev.4.00, January 29, 2004 Published by: Sales Strategic Planning Div. Renesas Technology Corp. Edited by: Technical Documentation & Information Department Renesas Kodaira Semiconductor Co.
SH7145 Group F P-144F User Sy stem Inte rface B oard HS7145E C H61H U ser’ s Manual REJ10B0037-0400H.
An important point after buying a device Renesas FP-144F (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Renesas FP-144F yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Renesas FP-144F - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Renesas FP-144F you will learn all the available features of the product, as well as information on its operation. The information that you get Renesas FP-144F will certainly help you make a decision on the purchase.
If you already are a holder of Renesas FP-144F, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Renesas FP-144F.
However, one of the most important roles played by the user manual is to help in solving problems with Renesas FP-144F. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Renesas FP-144F along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
