Instruction/ maintenance manual of the product APS-520 Audiovox
Go to page of 8
Page 1 128-8146 1 of 8 Model APS-520 Owner ’s Manual ARMING THE SYSTEM - ACTIVE 1. Turn off the engine, exit the vehicle, and close all doors, hood lid and trunk lid. 2. Press and release Lock/Arm button on the keychain transmitter . The dash mounted LED begins to flash slowly .
128-8146 2 of 8 Page 2 intrusion attempt has occurred, the siren will chirp 4 times and the parking lights will flash 3 times when disarming the system. Enter the vehicle and observe the red dash mounted LED to identify which zone was triggered. 1. If the LED is flashing one time.
Page 3 128-8146 3 of 8 2. Turn the ignition switch to the on position. 3. Within 10 seconds, press and release the valet/override switch, 3 times. 4. Within 10 seconds turn the ignition switch off, on, off, on, off, on. (The siren or horn will beep and the lights will flash one time.
128-8146 4 of 8 Page 4 that can be selected by the operator: 1. Normal Operation (default mode) In this mode, any strong vibrations will cause the siren to sound (full detect) for 30 seconds. Any lesser vibration will cause the siren to emit about 6 short warn away chirps, (pre-detect).
Page 5 128-8146 5 of 8 2 ) Press and release the pushbutton switch three times The unit will flash the parking lights and or beep the horn once to indicate that the system is in the transmitter program mode. The LED will also flash one time pause, one time pause, etc.
128-8146 6 of 8 Page 6 FEA TURES AND FUNCTIONS OF YOUR TWO W A Y LCD 920TX2 Doors are locked Icon. If the system is armed “ ARM “ will also appear below the Lock Icon. Doors Unlocked Icon. V alet Mode. When Transmitting, any button activated. Within Range Indicator .
Page 7 128-8146 7 of 8 Credit card purchasers can order additional or replacement transmitters by phone. Simply dial 1 - 800 - 645 - 4994, and follow the instructions from the operator interface.
128-8146 8 of 8 Page 8 © 2007 Audiovox Electornics Corporation, 150 Marcus Blvd., Hauppauge, N.Y ., 1 1788 128-8146.
An important point after buying a device Audiovox APS-520 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox APS-520 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox APS-520 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox APS-520 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox APS-520 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox APS-520, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox APS-520.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox APS-520. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox APS-520 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
