Instruction/ maintenance manual of the product APS-510 Audiovox
Go to page of 8
Model APS-510 Installation Manual Note: The method of manual override can either be selected to operate from the valet switch or operate as custom code. Be certain to place a check mark indicating the method used in the box located on the last page of the owner's manual.
Page 2 Fifth Press and release the valet switch 2 chirps = active locks Press transmitter Lock button to change 1 chirp = passive locks or Sixth Press and release the valet switch 2 chirps = active ar.
Page 3 Do not mount the control module in the engine compartment, as it is not waterproof. Y ou should also avoid mounting the unit directly onto factory installed electronic components. These components may cause RF interference, which can result in poor transmitter range or intermittent operation.
Page 4 Orange Wire: 300 mA GROUND OUTPUT WHEN ARMED - N. C. ST AR TER DISABLE (Optional Relay Required) This wire is provided to control the starter cut relay .
Page 5 Black w/ White T race Wire: 300 mA Horn Output The black w/ white trace wire is provided to beep the vehicle’s horn. This is a transistorized low current output, and should only be connected to the low current ground output from the vehicle’s horn switch.
Page 6 W ARNING: Connecting the light blue/green to the high current switched output of trunk release circuits, some remote start trigger inputs, will damage the control module.
green wire to the wire that provides a low current positive signal from the factory door lock switch to the factory door lock control relay . 3 Wire Positive Switched 2 Step Door Locks The green wire provides a positive pulse during arming, or the pulsed + 12 volt lock output.
© 2000 Audiovox Corporation, 150 Marcus Blvd., Hauppauge, N.Y. 11788 128-5756B.
An important point after buying a device Audiovox APS-510 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox APS-510 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox APS-510 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox APS-510 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox APS-510 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox APS-510, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox APS-510.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox APS-510. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox APS-510 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
