Instruction/ maintenance manual of the product APS-410a Audiovox
Go to page of 10
128-6468 1 of 10 Model APS-410a Owner ’ s Manual 4 Button Remote Security System with Dual Stage Shock Sensor IMPORT ANT ! In order to provide the highest possible level of security to your vehicle, this system is equipped with selectable manual override circuitry .
128-6468 2 of 10 Page 2 YOUR “Code Hopping” TRANSMITTERS The transmitters included with your new security system use the most advanced and secure form of radio frequency transmission available on any current automotive security system.
128-6468 3 of 10 Page 3 detected a open entry point after the learned delay expired. Closing the hood, trunk, or doors will correct the problem and you do not need to disarm the system to make the correction. o Doors Lock - Optional ARMING THE SYSTEM - P ASSIVE ( AUT OMA TIC ) 1.
128-6468 4 of 10 Page 4 DISARMING THE SYSTEM 1. As you approach the vehicle, press and release the Unlock button on the keychain transmitter . þ Dash mounted LED turns off. If passive arming was selected during the installation, then the LED will start flashing rapidly , indicating that the system i s re-arming automatically .
128-6468 5 of 10 Page 5 refer to the INTRUSION WARNING SIGNALS section of this manual to identify which zone was triggered. o Doors Unlock - Optional Note : If the optional 2 step door unlock circuit .
128-6468 6 of 10 Page 6 (Light Emitting Diode) turns on. The LED will remain on as long as the system is in valet mode. 3. T o return to normal operation, press and release the push button switch any time the ignition is on.
128-6468 7 of 10 Page 7 flashing the LED, first indicating the 10ths digit, pause and then the units digit. The unit will report the new code three times with a one second pause between each code, then the system will begin arming. If the LED flash pattern reports the previously stored code, the new code was not entered correctly .
128-6468 8 of 10 Page 8 1) Enter the vehicle and turn the ignition switch to the on position. Note: The siren will sound. 2) Within 5 seconds, press and release the pushbutton switch 1 time. 3) Within 5 seconds, turn the ignition switch off then on. 4) Within 5 seconds, press and release the pushbutton switch 1 time.
128-6468 9 of 10 Page 9 While in the panic mode, anytime the DISARM button is pressed, the panic feature will continue for the allotted 30 seconds, however , the security system will be disarmed allowing the vehicle to start.
128-6468 10 of 10 © 2003 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y. 11788 128-6468 APS 410a SYSTEM FUNCTIONS A T A GLANCE DASH LED INDICA TORS RAPID FLASHING = P ASSIVE ARMING SLOW FLASHING = ARMED OF F = DISARMED ON S OL I D = V ALET MODE 3 FLASH.
An important point after buying a device Audiovox APS-410a (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox APS-410a yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox APS-410a - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox APS-410a you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox APS-410a will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox APS-410a, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox APS-410a.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox APS-410a. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox APS-410a along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
