Instruction/ maintenance manual of the product U38-LP1 Regency Wraps
Go to page of 32
FPI FIREPLACE PRODUCTS INTERNA TIONAL L TD. 6988 V enture St., Delta, BC Canada, V4G 1H4 W ARNING: If the information in these instructions are not followed ex- actly , a fi re or explosion may result causing property damage, personal injury or loss of life.
2 Regency ® U38-1 UL TIMA TE Freestanding Gas Stove T o the New Owner: Congratulations! Y ou are the owner of a state-of-the-art UL TIMA TE Gas Stove by FIREPLACE PRODUCTS INTERNA TIONAL L TD.
Regency ® U38-1 UL TIMA TE Freestanding Gas Stove 3 T ABLE OF CONTENTS OPERA TING INSTRUCTIONS Operating Instructions ................................................ 19 Lighting Instructions .................................................... 19 Shutdown Instructions .
4 Regency ® U38-1 UL TIMA TE Freestanding Gas Stove This is a copy of the label that accompanies each UL TIMA TE Freestanding Gas Stove. We have printed a copy of the contents here for your review . The safety label is located on the inside of the drop down pedestal door .
Regency ® U38-1 UL TIMA TE Freestanding Gas Stove 5 REQUIREMENTS 5.08: Modifica tions to NFPA-54, Chap ter 10 (2) Revise 10.8. 3 by adding the following a dditional requi rements: (a) For all side wa.
6 Regency ® U38-1 UL TIMA TE Freestanding Gas Stove INST ALLA TION BEFORE YOU ST ART Safe installation and operation of this appli- ance requires common sense, however , we are required by the Canadi.
Regency ® U38-1 UL TIMA TE Freestanding Gas Stove 7 Side View Rear View Outside Air Through Rear of Pedestal Remove the blanking plate from the rear of the pedestal cover plate and bend the two tabs out 90 degrees. Pipe fresh air into the pedestal area by using duct pipe with a mesh grill at the outside termination.
8 Regency ® U38-1 UL TIMA TE Freestanding Gas Stove.
Regency ® U38-1 UL TIMA TE Freestanding Gas Stove 9 4) Light the pilot and turn the valve to "ON" position. 5) The pressure check should be carried out with the unit burning and the setting should be within the limits specifi ed on the safety label.
10 Regency ® U38-1 UL TIMA TE Freestanding Gas Stove INST ALLA TION CONVERSION KIT# 731-969 FOR NG T O LP THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER IF IN DOUBT DO NOT DO THIS CONVERSION !! 1) Shut of f the gas supply . 2) Open the front door and carefully remove the logs and lava rock.
Regency ® U38-1 UL TIMA TE Freestanding Gas Stove 11 15) Pull off the pilot cap to expose the pilot orifi ce. 16) Unscrew the pilot orifi ce with the allen key and replace with the LPG pilot orifi ce in the kit. 18) Reinstall new burner orifi ce LPG stamped #50 and tighten.
12 Regency ® U38-1 UL TIMA TE Freestanding Gas Stove 29) Reversing step 23 and secure the con- trol panel back onto the stove pedestal with the screws. 31) The Ground Wire, DC Sparker Ignition Wire and Piezo Spark Wire all go through the hole located on the pedestal back cover .
Regency ® U38-1 UL TIMA TE Freestanding Gas Stove 13 LOG SET INST ALLA TION Read the instructions below carefully and refer to the diagrams. If logs are broken do not use the unit until they are replaced. Broken logs can interfere with the pilot operation.
14 Regency ® U38-1 UL TIMA TE Freestanding Gas Stove INST ALLA TION C)02-44 Pins on Rear Log Support A)02-65 B)02-56 3) Place Rear Log A)02-65 on the two pins on the rear log support. 4) Place the Middle Left Log B)02-56 on the two pins as shown. 5) Sprinkle some lava rock just in front of B) 02-56 on the burner holes.
Regency ® U38-1 UL TIMA TE Freestanding Gas Stove 15 The thermally activated safety switch must be manually reset before fi rst startup. Note: If the fl ue is blocked or has a strong reverse fl ow , the thermally actuated safety switch mounted in the draft hood will auto- matically shut off the gas supply within about 10 minutes.
16 Regency ® U38-1 UL TIMA TE Freestanding Gas Stove OPTIONAL REMOTE CONTROL Use the Regency ® Remote Control Kit ap- proved for this unit. Use of other systems may void your warranty . The remote control kit comes with a hand held transmitter , a receiver and a wall mounting plate.
Regency ® U38-1 UL TIMA TE Freestanding Gas Stove 17 WIRING DIAGRAMS.
18 Regency ® U38-1 UL TIMA TE Freestanding Gas Stove.
Regency ® U38-1 UL TIMA TE Freestanding Gas Stove 19 OPERA TING INSTRUCTIONS 2) Push in PILOT knob slightly and turn clock- wise to off . Knob cannot be turned from pilot to off unless knob is pushed in slightly . Do not force. 3) Wa it fi ve minutes to allow gas, that may have accumulated in the main burner compart- ment, to escape.
20 Regency ® U38-1 UL TIMA TE Freestanding Gas Stove COPY OF THE LIGHTING PLA TE INSTRUCTIONS OPERA TING INSTRUCTIONS 1) Push in gas control knob slightly and turn to “PILOT” position. 2) Push in control knob all the way and hold in until the pilot lights up.
Regency ® U38-1 UL TIMA TE Freestanding Gas Stove 21 NORMAL OPERA TING SOUNDS OF GAS APPLIANCES It is possible that you will hear some sounds from your gas appliance. This is perfectly normal due to the fact that there are various gauges and types of steel used within your appliance.
22 Regency ® U38-1 UL TIMA TE Freestanding Gas Stove MAINTENANCE 4) Remove the door catch plate. 5) Remove glass retainers on sides fi rst (3 each side) then remove two center retainers. Note: Center glass retainers are glued to center glass. 6) Remove glass from extrusions.
Regency ® U38-1 UL TIMA TE Freestanding Gas Stove 23 MAINTENANCE F AN MAINTENANCE If your fan requires maintenance or replacement, access to the fan is through the access panel on the rear wall of the fi rebox. Note: The unit MUST NOT be operated without the fan access panel securely in place and correctly sealed.
24 Regency ® U38-1 UL TIMA TE Freestanding Gas Stove 4) Remove the two outside frame pieces by removing two screws per side. See diagram below . REMOVING V AL VE If your valve requires maintenance or replace- ment, follow these instructions: NOTE: Always shut off the gas supply before removing the valve.
Regency ® U38-1 UL TIMA TE Freestanding Gas Stove 25.
26 Regency ® U38-1 UL TIMA TE Freestanding Gas Stove.
Regency ® U38-1 UL TIMA TE Freestanding Gas Stove 27 U38-1 DOOR ASSEMBLIES P ARTS LIST 730-921 Brush Nickel Mitred Door - Complete 730-924 Gold Mitred Door - Complete 730-926 Black Mitred Door - Comp.
28 Regency ® U38-1 UL TIMA TE Freestanding Gas Stove NOTES ___________________________________________________ ___________________________________________________ ____________________________________.
Regency ® U38-1 UL TIMA TE Freestanding Gas Stove 29 NOTES ___________________________________________________ ___________________________________________________ ____________________________________.
30 Regency ® U38-1 UL TIMA TE Freestanding Gas Stove NOTES ___________________________________________________ ___________________________________________________ ____________________________________.
Regency ® U38-1 UL TIMA TE Freestanding Gas Stove 31 W ARRANTY Regency ® Fireplace Products are designed with reliability and simplicity in mind. In addition, our internal Quality Assurance T eam carefully inspects each unit thoroughly before it leaves our facility .
Installer: Please complete the following information Dealer Name & Address: ______________________________________________ ___________________________________________________________________ Insta.
An important point after buying a device Regency Wraps U38-LP1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Regency Wraps U38-LP1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Regency Wraps U38-LP1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Regency Wraps U38-LP1 you will learn all the available features of the product, as well as information on its operation. The information that you get Regency Wraps U38-LP1 will certainly help you make a decision on the purchase.
If you already are a holder of Regency Wraps U38-LP1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Regency Wraps U38-LP1.
However, one of the most important roles played by the user manual is to help in solving problems with Regency Wraps U38-LP1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Regency Wraps U38-LP1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
