Instruction/ maintenance manual of the product I2400M Regency Wraps
Go to page of 20
FPI FIREPLACE PRODUCTS INTERNA TIONAL L TD. 6988 V enture St., Delta, BC Canada, V4G 1H4 918-171a MODELS: I2400M WOOD Fireplace Insert 07/18/06 Owners & Installation Manual Installer : Please complete the details on the back cover and leave this manual with the homeowner .
Regency I2400M 2 Thank-you for purchasing a REGENCY FIREPLACE PRODUCT . The pride of workmanship that goes into each of our products will give you years of trouble-free enjoyment. Should you have any questions about your product that are not covered in this manual, please contact the REGENCY DEALER in your area.
Regency I2400M 3 THE REGENCY I2400 WOOD INSERT T ABLE OF CONTENTS SAFETY LABEL Safety Label ................................................................. 4 UNIT DIMENSIONS Unit Dimensions ...........................................................
Regency I2400M 4 SAFETY LABEL This is a copy of the label that accompanies your Regency Insert . W e have printed a copy of the contents here for your review . NOTE: Regency units are constantly being improved. Check the label on the unit and if there is a difference, the label on the unit is the correct one.
Regency I2400M 5 UNIT DIMENSIONS.
Regency I2400M 6 INST ALLA TION CHIMNEY SPECIFICA TIONS Before installing, check and clean your chimney system thoroughly . If in doubt about its condi- tion, seek professional advice.
Regency I2400M 7 INST ALLA TION View from Rear of Insert OPTIONAL FLUE CONNECT OR KIT The Straight Flue Adaptor (Part #846-504) shown here, may be used to produce a secure connection between your fl ue connector and the insert collar . Detailed installation instructions are included with the kit.
Regency I2400M 8 Clearance diagram for Installations Side and T op facing is a maximum of 1.5" thick. Floor protection must be non-combustible, insula- tive material with an R value of 1.1 or greater . * Hearth thickness of 0.5" with k value = 0.
Regency I2400M 9 1) Positive Flue Connection with Cleanout FLUE CONNECT OR BRACKET Package contains: 3 brackets and 6 screws. These brackets are to be used to hold the fl ue liner (not supplied) to the Insert and keep the connection.
Regency I2400M 10 INST ALLA TION Faceplate Assembly Prior to sliding your insert into its fi nal position and attaching the connector or liner pipe, the faceplate side panel plates must be installed .
Regency I2400M 11 Ground Fan Fan Ground Green Neutral Live White Fan Switch Manual/ Auto Switch Black Black High (Black) Low (Red) Black Fan Thermodisc (normally open) 120V AC 60 Hz Thermo Switch Sensor INST ALLA TION STEP-BY -STEP INST ALLA TION OF THE F AN/BLOWER Blower/Fan Wiring Diagram 3) Slide the supports into the clips.
Regency I2400M 12 Pull Open Push Closed ensure the tube will not move when the unit is burning. Though there are four air tubes in the medium units. 2) Slide the left baffl e over the air tubes from the front and then push it to the back. 4) Important: push both baffl es so they are tight against the side walls.
Regency I2400M 13 OPERA TING INSTRUCTIONS FIRST FIRE When your installation is completed and in- spected, you are ready for your fi rst fi re. 1) Open draft control fully .
Regency I2400M 14 ASH DISPOSAL During constant use, ashes should be removed every few days. Please take care to prevent the build-up of ash around the start-up air housing located inside the fi rebox, under the loading door lip. DO NOT ALLOW ASHES TO BUILD UP TO THE LOADING DOORS.
Regency I2400M 15 MAINTENANCE OF GOLD-PLA TED DOORS The gold electroplated fi nish on the doors requires little maintenance, and need only be cleaned with a damp cloth. DO NOT use abrasive materials or chemical cleaners, as they may harm the fi nish and void the warranty .
Regency I2400M 16 MAIN ASSEMBL Y & OPTIONS - I2400M P ARTS LIST Part # Description 142-917 Fan Assembly 24) 910-157/P Fan Motor 120 V olts 25) 910-678 Power Cord 120 V olts 27) 910-142 Fan Thermod.
Regency I2400M 17 P ARTS LIST F ACEPLA TES - I2400M Part # Description 140-91 1 Faceplate & T rim Set - Regular 285) 143-161 Trim Right Regular 286) 143-158 Trim T op Regular 287) 143-160 Trim Lef.
Regency I2400M 18 P ARTS LIST BRICK P ANELS - I2400M Part # Description 70) 902-1 1 1 Brick Regular Full Size: 1-1/4" x 4-1/2" x 9" 75) 802-122 Brick Partial: 1-1/4 x 4-1/2" x 2&qu.
Regency I2400M 19 W ARRANTY Regency Fireplace Products are designed with reliability and simplicity in mind. In addition, our internal Quality Assurance T e am carefully inspects each unit thoroughly before it leaves our door . Regency Industries Ltd.
Printed in Canada Installer: Please complete the following information Dealer Name & Address: ______________________________________________ _______________________________________________________.
An important point after buying a device Regency Wraps I2400M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Regency Wraps I2400M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Regency Wraps I2400M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Regency Wraps I2400M you will learn all the available features of the product, as well as information on its operation. The information that you get Regency Wraps I2400M will certainly help you make a decision on the purchase.
If you already are a holder of Regency Wraps I2400M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Regency Wraps I2400M.
However, one of the most important roles played by the user manual is to help in solving problems with Regency Wraps I2400M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Regency Wraps I2400M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
