Instruction/ maintenance manual of the product C33-NG3 Regency Wraps
Go to page of 28
W ARNING: If the information in these instructions are not followed ex- actly , a fi re or explosion may result causing property damage, personal injury or loss of life. FOR YOUR SAFETY Do not store or use gasoline or other fl ammable vapors and liquids in the vicinity of this or any other appliance.
2 Regency ® CLASSIC C33-3 Freestanding Gas Stove T o the New Owner: Congratulations! Y ou are the owner of a state-of-the-art Gas Stove by Fireplace Products International Ltd. The Regency ® Gas Series of hand crafted appliances has been designed to provide you with all the warmth and charm of a woodstove, at the fl ick of a switch.
Regency ® CLASSIC C33-3 Freestanding Gas Stove 3 T ABLE OF CONTENTS SAFETY LABEL Serial No. Decal ............................................................ 4 REQUIREMENTS MA Code - CO Detector (for state of Massachusetts only) ....................
4 Regency ® CLASSIC C33-3 Freestanding Gas Stove This is a copy of the label that accompanies each CLASSIC Freestanding Gas Stove - Natural Gas and Propane . We have printed a copy of the contents here for your review . The safety label is located on the back panel.
Regency ® CLASSIC C33-3 Freestanding Gas Stove 5 REQUIREMENTS 5.08: Modifica tions to NFPA-54, Chapte r 10 (2) Revise 10.8. 3 by adding the fo llowing additio nal requireme nts: (a) For all side wall.
6 Regency ® CLASSIC C33-3 Freestanding Gas Stove INST ALLA TION IMPORT ANT MESSAGE The CLASSIC Freestanding Gas Stove must be installed in accordance with these instructions.
Regency ® CLASSIC C33-3 Freestanding Gas Stove 7 Diagram 4 9) Lift the fan assembly in through the pedestal and up through the cut out as shown in diagrams 3 and 4. 10) Put the insulation gasket on the back of the fan. Line up the keyhole slots with the matching screws and pull back slightly to lock into place.
8 Regency ® CLASSIC C33-3 Freestanding Gas Stove INST ALLA TION PEDEST AL ASSEMBL Y 1) For easier assembly , tip the stove on its back (preferably onto a soft surface to prevent scratching).
Regency ® CLASSIC C33-3 Freestanding Gas Stove 9 VENTING This heater is a vented appliance and must be connected to a chimney/fl ue in accordance with installation codes. Note: The rear cover plate is only attached when outside air is being used. Do not install it when using room air for combustion.
10 Regency ® CLASSIC C33-3 Freestanding Gas Stove HIGH ELEV A TION This unit is approved in Canada for altitude 0 to 4500 ft. (CAN1 2.17-M90) with the orifi ce supplied.
Regency ® CLASSIC C33-3 Freestanding Gas Stove 11 VA LV E DESCRIPTION 1) Gas on/off knob 2) Manual high/low adjustment 3) Pilot Adjustment 4) Thermocouple Connection 5) Main Operator 6) Outlet Pressu.
12 Regency ® CLASSIC C33-3 Freestanding Gas Stove Diagram 2 LOG SET INST ALLA TION W ARNING: Dangerous operating condi- tions may occur if these logs are not po- sitioned in their approved locations. Read the instructions below carefully and refer to the diagrams.
Regency ® CLASSIC C33-3 Freestanding Gas Stove 13 FINAL CHECK Before leaving this unit with the customer , the installer must ensure that the appliance is fi ring correctly . This includes: 1) Clocking the appliance to ensure the cor- rect fi ring rate (rate noted on label) after 15 minutes.
14 Regency ® CLASSIC C33-3 Freestanding Gas Stove WIRING DIAGRAMS This heater does not require a 120V A.C. sup- ply for operation. In case of a power failure, the burner switch and the optional remote control/ thermostat will continue to operate. However , a 120V A.
Regency ® CLASSIC C33-3 Freestanding Gas Stove 15 It is possible that you will hear some sounds from your gas appliance. This is perfectly normal due to the fact that there are various gauges and types of steel used within your appliance. Listed below are some examples.
16 Regency ® CLASSIC C33-3 Freestanding Gas Stove OPERA TING INSTRUCTIONS LIGHTING PROCEDURE NOTE: For all propane units and units equipped with electric spark boxes, see "Copy of Lighting Plate Instruc- tions" section for more details.
Regency ® CLASSIC C33-3 Freestanding Gas Stove 17 COPY OF THE LIGHTING PLA TE INSTRUCTIONS OPERA TING INSTRUCTIONS 1) Push in gas control knob slightly and turn to “PILOT” position. 2) Push in control knob all the way and hold in until the pilot lights up.
18 Regency ® CLASSIC C33-3 Freestanding Gas Stove PILOT ADJUSTMENT Periodically check the pilot fl ames. Correct fl ame pattern has three strong blue fl ames: 1 fl owing around the thermopile, 1 around the thermocouple and 1 fl owing across the burner (it does not have to be touching the burner).
Regency ® CLASSIC C33-3 Freestanding Gas Stove 19 7) Install the replacement glass. When placing the replacement glass in the door , make sure that the glass gasketing will properly seal your unit. 8) Put glass in place and then position glass retainer rod.
20 Regency ® CLASSIC C33-3 Freestanding Gas Stove MAINTENANCE 8) If optional fan is installed, remove thermodisc to bracket by removing three (3) phillips head M5 screws. 9) Remove front cover with Piezo Igniter by removing two (2) sheet metal screws.
Regency ® CLASSIC C33-3 Freestanding Gas Stove 21 MAIN ASSEMBL Y P ARTS LIST Part # Description 1) 850-141 Small Door - Black 850-142 Small Door - Gold 850-143 Small Door - Nickel Accent 850-144 Smal.
22 Regency ® CLASSIC C33-3 Freestanding Gas Stove P ARTS LIST BURNER & LOGS Part # Description 52) 910-190 Piezo Ignitor & Nut 53) * Control Panel 908-672 Control Panel Decal 462-560/P V alve Assembly - S.I.T . - NG 462-561/P V alve Assembly - S.
Regency ® CLASSIC C33-3 Freestanding Gas Stove 23 BASE OPTIONS P ARTS LIST 490-921 Complete Floor Shield 100) 948-216 Regency ® Logo (Gold) 948-223 Regency ® Logo (Silver) 102) 904-257 Magnetic Catch (Large) 103) * 1 1" Pedestal Hinge 108) 910-246 Burner ON/OFF Switch (2-way) 109) 910-272 L T .
24 Regency ® CLASSIC C33-3 Freestanding Gas Stove ___________________________________________________ ___________________________________________________ _____________________________________________.
Regency ® CLASSIC C33-3 Freestanding Gas Stove 25 ___________________________________________________ ___________________________________________________ _____________________________________________.
26 Regency ® CLASSIC C33-3 Freestanding Gas Stove ___________________________________________________ ___________________________________________________ _____________________________________________.
Regency ® CLASSIC C33-3 Freestanding Gas Stove 27 W ARRANTY Regency ® Fireplace Products are designed with reliability and simplicity in mind. In addition, our internal Quality Assurance T eam carefully inspects each unit thoroughly before it leaves our facility .
28 Regency ® CLASSIC C33-3 Freestanding Gas Stove Installer: Please complete the following information Dealer Name & Address: ______________________________________________ ______________________.
An important point after buying a device Regency Wraps C33-NG3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Regency Wraps C33-NG3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Regency Wraps C33-NG3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Regency Wraps C33-NG3 you will learn all the available features of the product, as well as information on its operation. The information that you get Regency Wraps C33-NG3 will certainly help you make a decision on the purchase.
If you already are a holder of Regency Wraps C33-NG3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Regency Wraps C33-NG3.
However, one of the most important roles played by the user manual is to help in solving problems with Regency Wraps C33-NG3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Regency Wraps C33-NG3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
