Instruction/ maintenance manual of the product U20 Regency
Go to page of 12
908-037 01/15/04 Owners & Installation Manual Fireplace Products International Ltd. 6988 Venture St., Delta, B.C. Canada, V4G 1H4 Tested by: Warnock Hersey: Masport Head Office - Australia 54 Boundary Rd. Braeside P.O. Box 553 Mordialloc 3195 Ph. (03) 9586-7777 Fax.
2 U20/E21 Gas Insert Zero Clearance Kit T ABLE OF CONTENTS U20/E21 GAS INSERT ZERO CLEARANCE KIT CONTENTS PAGE Listings & Code Approvals .................................................. 3 Specifications ..........................................
3 U20/E21 Gas Insert Zero Clearance Kit Specifications INST ALLA TION LISTINGS AND CODE APPROVALS This gas component has been tested in accordance with National Safety Standards, and has been certifie.
4 U20/E21 Gas Insert Zero Clearance Kit P ARTS Included with Kit: 1 Main Body Assembly (5 pieces) 1 Faceplate Top Insulation 1 Zero Clearance Top Louver Assembly Sold Separately: (Rq)=Required (Rq) 1 402-918 Faceplate 40-1/4"W x 26-1/4"H (1020mm W x 665mm H) c/w faceplate trim.
5 U20/E21 Gas Insert Zero Clearance Kit INST ALLA TION A D E C F B LOCA TING YOUR U20/E21 FIREPLACE Due to high temperatures the Insert should be located out of traffic and away from furniture and draperies. Provide a minimum of 48" (1220mm) front clearance to the unit.
6 U20/E21 Gas Insert Zero Clearance Kit INST ALLA TION KIT ASSEMBL Y Parts 1) Top Assembly 2) Base Assembly 3) Back Panel 4) Left Side Panel 5) Right Side Panel 6) Gas Line Cover Plate Kit Assembly 1) Lay the Base Assembly on a flat surface. 2) Attach the Left and Right Side panels to the Back panel (one screw each side).
7 U20/E21 Gas Insert Zero Clearance Kit Variable Chimney Routes VENTING 1) This fireplace must be vented with a 4" (100mm) diameter Class “B” vent. The installation of the venting system must conform and be in accordance with the natural gas installation code CAN/CGA - B149 (Canada), ANSI Z223.
8 U20/E21 Gas Insert Zero Clearance Kit INST ALLA TION INSERT INST ALLA TION 1) Insert the U20/E21 Zero Clearance box into desired location and frame according to the instructions on page 5. 2) Run required gas and electrical connections to the Zero Clearance box, both are located on the left hand side of the U20/E21 Insert.
9 U20/E21 Gas Insert Zero Clearance Kit INST ALLA TION OPTIONAL OUTSIDE COMBUSTION AIR SUPPL Y INST ALLA TION A 4" (100 mm) dia. aluminum flex pipe or equivalent may be installed from the outside (with a proper exterior cover) to the Zero Clearance cabinet.
10 U20/E21 Gas Insert Zero Clearance Kit ON/OFF Switch Fan Speed Switch (Rear View) Wires to Fan Switch Connectors Self-adhesive Wire Clip For Gas Connection Wires to On/Off Switch POWER CORD (3ft) Di.
11 U20/E21 Gas Insert Zero Clearance Kit INST ALLA TION Diagram 4 10) Attach the brass trim to the faceplate by drilling a 1/8" (3mm) hole through the faceplate using the hole in the trim as a guide. Fasten the trim to the faceplate panels using the plated screws.
Printed in Canada.
An important point after buying a device Regency U20 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Regency U20 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Regency U20 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Regency U20 you will learn all the available features of the product, as well as information on its operation. The information that you get Regency U20 will certainly help you make a decision on the purchase.
If you already are a holder of Regency U20, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Regency U20.
However, one of the most important roles played by the user manual is to help in solving problems with Regency U20. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Regency U20 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
