Instruction/ maintenance manual of the product FireGenie Regency
Go to page of 24
North American V ersion REMOTE CONTROL INST ALLA TION & OPERA TING INSTRUCTIONS © Copyright 2006, FPI Fireplace Products International Ltd. All rights reserved.
The FireGenie TM Remote Control is tested safe when installed in accordance with this installation manual. It is your responsibility to read all instructions before starting installation and to follow these instructions carefully during installation. The FireGenie TM Remote Control is carefully engineered and MUST be installed only as specified.
T ABLE OF CONTENTS Matching Remote Control & Receiver ID Code ...................................................................... 4 Remote Control Keypad ..........................................................................................
FPI FireGenie TM Remote Control Manual 4 The Remote Control handset has a set of unique ID codes that is pre-programmed into its memory . This set of ID codes helps to differentiate one Remote Control handset from another so that only the control box with a matching ID code will respond to the appropriate Remot Control handset.
FPI FireGenie TM Remote Control Manual 5 The FireGenie TM is a custom designed Remote Control system with the following features: * Thermostatic Control; * An Automatic & Manual Mode for controlling unit ON and OFF; * A Program Mode for programming 2 time periods per day for all days of the week.
FPI FireGenie TM Remote Control Manual 6 REMOTE CONTROL SCREEN DISPLA Y (LCD) The LCD provides the following display features: 1. Flame Indication; 2. Manual & Auto Mode Indication - MANUAL / AUTO; 3. ROOM or SET T emperature Indicator; 4.
FPI FireGenie TM Remote Control Manual 7 RECEIVER OPERA TION The Remote Receiver has 3 operating modes, namely ON, OFF and Remote. The operating mode is selected by means of a slide switch on the front panel of the Receiver . ON: When ON Mode is selected, the flame will turn ON.
FPI FireGenie TM Remote Control Manual 8 AUTO MODE There is a 3-minute delay built into the Remote Control. This delay will affect the AUTO and PROG modes only . Which means the unit may not respond to specific instructions instantly when in either of these 2 modes.
FPI FireGenie TM Remote Control Manual 9 ADV ANCED FUNCTION - PROGRAM MODE Note: Ensure the Remote Control has been turned ON in order to operate in this mode. Pr ogram mode is selected by pressing and releasing the AUTO/MAN button until the symbol PROG is shown on the LCD.
FPI FireGenie TM Remote Control Manual 10 Time Zone 1 O n- Time Prog rammi ng of Ti me Zone 1 SETTING THE PROGRAM MODE The user can program two On-T imes and two Of f-T imes as well as the T emperature settings for each day of the week. The PROG button is used to initiate the programming mode.
FPI FireGenie TM Remote Control Manual 11 Time Zone 1 Off-Time Programming of Time Zone 1 Time Zone 1 Set Temperature Programming of Time Zone 1 2) Programming the Off-Time of Time Period 1 Press and release the PROG button again to program the Of f-T ime for Time Period 1.
FPI FireGenie TM Remote Control Manual 12 Time Zone 2 Off-Time Programming of Time Zone 2 Time Zone 2 On-Time Programming of Time Zone 2 4) Programming the On-Time of Time Period 2 Press and release the PROG button again to program the On-T ime of T ime Period 2.
FPI FireGenie TM Remote Control Manual 13 Time Zone 2 Set Temperature Programming of Time Zone 2 6) Programming the Set T emperature of Time Period 2 Press and release the PROG button one more time to program the Set T emperature of T ime Period 2. Use the + and - buttons to adjust the temperature setting.
FPI FireGenie TM Remote Control Manual 14 The Day, Set T emperature and Prog 2 will all begin to flash simultaneuosly , indicating that Copy Mode has been activated. Pressing and releasing the + button will select the Day(s) of which the program is to copy to.
FPI FireGenie TM Remote Control Manual 15 INST ALLING THE RECEIVER 2. Connect the output cable of the Receiver t o the valve. Refer to the unit instruction manual for wiring details. Inst alling the Receiver to a W all Mount a. Secure the Receiver to the wall receptacle box.
FPI FireGenie TM Remote Control Manual 16 Bracket Receiver Heat Shield Receiver Installing the Receiver to a Fireplace Control Switch Remote Receiver Battery Pack.
FPI FireGenie TM Remote Control Manual 17 Remote Receiver Firebox Heat Shield Remote Receiver.
FPI FireGenie TM Remote Control Manual 18 TROUBLESHOOTING If the Remote Control does not turn on: • Check to see that the Receiver is in the Remote position. • Ensure the batteries are correctly installed in the Receiver . • Check the batteries for replacement.
FPI FireGenie TM Remote Control Manual 19 Displaying T emperature in Celsius or Fahrenheit The default setting of the Remote Control is to display the temperature in Fahrenheit. However , the Remote Control can be changed to display temperature in Celsius by the following steps: 1.
FPI FireGenie TM Remote Control Manual 20 NOTES: _____________________________________________________________________________________ ____________________________________________________________ ____.
FPI FireGenie TM Remote Control Manual 21 NOTES: _____________________________________________________________________________________ ____________________________________________________________ ____.
FPI FireGenie TM Remote Control Manual 22 NOTES: _____________________________________________________________________________________ ____________________________________________________________ ____.
FPI FireGenie TM Remote Control Manual 23.
FPI FireGenie TM Remote Control Manual 24 FireGenie TM is a trademark of FPI Fireplace Products International Ltd. Print ed in Canada IMPORT ANT! The transmitter and receiver in this box must be coded together before proceeding to program the remote to function.
An important point after buying a device Regency FireGenie (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Regency FireGenie yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Regency FireGenie - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Regency FireGenie you will learn all the available features of the product, as well as information on its operation. The information that you get Regency FireGenie will certainly help you make a decision on the purchase.
If you already are a holder of Regency FireGenie, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Regency FireGenie.
However, one of the most important roles played by the user manual is to help in solving problems with Regency FireGenie. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Regency FireGenie along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
