Instruction/ maintenance manual of the product CS1200 Regency
Go to page of 32
FPI FIREPLACE PRODUCTS INTERNA TIONAL L TD. 6988 V enture St., Delta, BC Canada, V4G 1H4 918-896 CS1200 Alterra™ Freestanding W ood Sto ve 07/05/10 Owner's & Installation Manual T ested by: Installer : Please complete the details on the back cover and leave this manual with the homeowner .
Regency CS1200 Wood Cast Insert 2 Thank-you for purchasing a REGENCY FIREPLACE PRODUCT . The pride of workmanship that goes into each of our products will give you years of trouble-free enjoyment. Should you have any questions about your product that are not covered in this manual, please contact the REGENCY DEALER in your area.
Regency CS1200 F reestanding W ood Stov e 3 SAFETY LABEL This is a copy of the label that accompanies each CS1200 Wood Stove . W e have printed a copy of the contents here for your review . HOT WHILE IN OPERA TION DO NOT TOUCH. KEEP CHILDREN, CLOTHING AND FURNITURE A W A Y .
4 Regency CS1200 F reestanding W ood Stov e T ABLE OF CONTENTS SAFETY LABEL Copy of the Safety Label ............................................... 3 DIMENSIONS Unit Dimensions ............................................................ 5 INST ALLA TION Residential Installation.
Regency CS1200 F reestanding W ood Stov e 5 DIMENSIONS UNIT DIMENSIONS 9-15/16 ” 14-7/16 ” 39-9/16 ”( 1 1 0 5 m m ) 17-1/8” (436mm) 26-3/4”(680mm) A A 21-3/4” (552mm) 37-13/16” (961mm) 1.
6 Regency CS1200 F reestanding W ood Stov e INST ALLA TION RESIDENTIAL INST ALLA TION 1) Read all instructions before installing your Re- gency Stove. Install and use only in accordance with these installation and operating instructions. Be aware that local Codes and Regulations may override some items in this manual.
Regency CS1200 F reestanding W ood Stov e 7 INST ALLA TION MINIMUM CLEARANCE T O COMBUSTIBLE MA TERIALS MEASUREMENTS "FROM UNIT" ARE FROM THE SIDE SHIELDS OF THE STOVE T O A SIDE W ALL OR T .
8 Regency CS1200 F reestanding W ood Stov e INST ALLA TION Z 6" 6" 16" Y Y X X 6" for angled corners 6" 16" 6" 6" Z The Regency Freestanding models have been alcove approved and must be installed with a listed double wall connector to the ceiling level.
Regency CS1200 F reestanding W ood Stov e 9 INST ALLA TION Horizontal Installation Standard Ceiling Installation 8) T o complete your chimney installation, install the double wall connector pipe from the stove’s fl ue collar to the chimney support device.
10 Regency CS1200 F reestanding W ood Stov e INST ALLA TION F ACTOR Y BUIL T CHIMNEY When a metal prefabricated chimney is used, the manufacturer's installation instructions must be followed.
Regency CS1200 F reestanding W ood Stov e 11 INST ALLA TION Method A : 12" (304.8 mm) Clearance to Combustible W all Member: Using a minimum thickness 3.5" (89 mm) brick and a 5/8" (15.9 mm) minimum wall thickness clay liner , construct a wall pass-through.
12 Regency CS1200 F reestanding W ood Stov e INST ALLA TION MINIMUM RECOMMENDED FLUE HEIGHTS IN FEET (Measured from the top of the unit) # OF ELBOWS ELEV A TION (FT) ABOVE SEA LEVEL 0 2 x 15 o 4 x 15 o 2 x 30 o 4 x 30 o 2 x 45 o 4 x 45 o 0-1000 12.0 13.
Regency CS1200 F reestanding W ood Stov e 13 INST ALLA TION MOBILE HOME INST ALLA TION W ARNING: Minimum height requirements must be met. Safe removal of the chimney system must be adhered to when transporting the mobile home. W ARNING: Operate only with door fully closed - open feed door to feed fi re only .
14 Regency CS1200 F reestanding W ood Stov e INST ALLA TION SIMPSON DURA-PLUS Qty .Part # Description 1 6DVL8693 Connector Kit 1 6DP-MH9096 Mobile Home Kit ICC EXCEL 2100 Qty .Part # Description 1 6CL48 48" Chimney length (also in 12",18", 24" lengths.
Regency CS1200 F reestanding W ood Stov e 15 INST ALLA TION Side View Front View Front View 1) If the two air tubes are installed continue on to Step 2), if not, follow the instructions below . Install the air tube into the holes in the side channels.
16 Regency CS1200 F reestanding W ood Stov e INST ALLA TION SIDE P ANEL INST ALLA TION Before installation, panels must be handled and cleaned as per instructions noted below: Stainless Steel Panels • Stainless panels must be inspected for scratches and dimples prior to installation.
Regency CS1200 F reestanding W ood Stov e 17 INST ALLA TION ASH DRA WER OPTION 2) Remove the bricks from the fl oor of the fi rebox. 5) Position ash drawer lid in 'Open' position on the ash drawer lid (towards the front) as shown below . 6) Slide in ash drawer .
18 Regency CS1200 F reestanding W ood Stov e INST ALLA TION LOWER SURROUND DOOR REVERSAL (LEFT TO RIGHT SIDE OPENING) 1) The lower surround door can be reversed - to open from the right. Make sure stove has cooled, open the door - and remove it from the hinge by removing 2 bolts.
Regency CS1200 F reestanding W ood Stov e 19 INST ALLA TION CAST DOOR REVERSAL (LEFT TO RIGHT SIDE OPENING) 1) The door can be reversed - so that it will open to the left. Make sure stove has cooled to room temperature. Open the door to about 45 ° - then remove it from the hinge by lifting up and out.
20 Regency CS1200 F reestanding W ood Stov e INST ALLA TION OPTIONAL ASHLIP INST ALLA TION WOOD ST ORAGE When storing wood within pedestal- ensure wood does not protrude past door opening. Do not store newspaper within pedestal. Note: Please refer to local codes.
Regency CS1200 F reestanding W ood Stov e 21 INST ALLA TION 1) Remove the fi ve screws from the back panel of the unit - to remove the fan cover plate. 2) Slide the fan up into the rear heat shield. 3) After aligning holes, secure the fan to the rear heat shield using the fi ve screws removed earlier .
22 Regency CS1200 F reestanding W ood Stov e 22 OPERA TING INSTRUCTIONS 8) Do not place anything on the stove top during the curing process. This may result in damage to your paint fi nish. 9) During the fi rst few days it may be more dif fi cult to start the fi re.
Regency CS1200 F reestanding W ood Stov e 23 OPERA TING INSTRUCTIONS ASH DISPOSAL During constant use, ashes should be removed every few days. The Ash Drawer option features a convenient ash dump for easy removal of ash, refer to the "Modular Options" section.
24 Regency CS1200 F reestanding W ood Stov e MAINTENANCE SAFETY GUIDELINES AND W ARNINGS 1) Never use gasoline, gasoline type lantern fuels, kerosene, charcoal lighter fuel, or similar liquids to start or ‘freshen up’ a fi re in your heater . Keep all such liquids well away from the heater while it is in use.
Regency CS1200 F reestanding W ood Stov e 25 MAINTENANCE CREOSOTE When wood is burned slowly , it produces tar and other organic vapors, which when combined with moisture, form creosote. The creosote vapors condense in the relatively cool chimney fl ue of a slow burning fi re.
26 Regency CS1200 F reestanding W ood Stov e P AR TS LIST 1 6 13 14 11 3 2 9 4 5 10 7 8 12 Part # Description 1) 076-201 Cast Stove T op 2) 076-21 1 Cast Pedestal 3) 156-21 1 Surround Bottom 4) 156-51.
Regency CS1200 F reestanding W ood Stov e 27 P AR TS LIST Part # Description 200-917 Fan Assembly Package 1) 220-026 Fan Housing Front 2) 222-022 Fan Housing Bottom 3) 222-036 Sensor Mount 4) 200-227 .
28 Regency CS1200 F reestanding W ood Stov e NO TES.
Regency CS1200 F reestanding W ood Stov e 29 NO TES.
30 Regency CS1200 F reestanding W ood Stov e NO TES.
Regency CS1200 F reestanding W ood Stov e 31 W ARRANTY Regency Fireplace Products are designed with reliability and simplicity in mind. In addition, our internal Quality Assurance T e am carefully inspects each unit thoroughly before it leaves our door .
32 Regency CS1200 F reestanding W ood Stov e 32 Installer: Please complete the following information Dealer Name & Address: ______________________________________________ _________________________.
An important point after buying a device Regency CS1200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Regency CS1200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Regency CS1200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Regency CS1200 you will learn all the available features of the product, as well as information on its operation. The information that you get Regency CS1200 will certainly help you make a decision on the purchase.
If you already are a holder of Regency CS1200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Regency CS1200.
However, one of the most important roles played by the user manual is to help in solving problems with Regency CS1200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Regency CS1200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
