Instruction/ maintenance manual of the product C33-LP2 Regency
Go to page of 24
WARNING: If the information in these instructions are not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life. FOR YOUR SAFETY Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
2 Regency CLASSIC C33-2 Freestanding Gas Stove To the New Owner: Congratulations! You are the owner of a state-of-the-art Gas Stove by Fireplace Products International Ltd. The Regency Gas Series of hand crafted appliances has been designed to provide you with all the warmth and charm of a woodstove, at the flick of a switch.
Regency CLASSIC C33-2 Freestanding Gas Stove 3 T ABLE OF CONTENTS Safety Label Safety Label ............................................................. 4 - 5 Installation Before you start .......................................................... 6 General Safety Information .
4 Regency CLASSIC C33-2 Freestanding Gas Stove This is a copy of the label that accompanies each CLASSIC Freestanding Gas Stove - Nat- ural Gas . We have printed a copy of the contents here for your review. The safety label is located on the back panel.
Regency CLASSIC C33-2 Freestanding Gas Stove 5 SAFETY LABEL This is a copy of the label that accompanies each CLASSIC Freestanding Gas Stove - Propane . We have printed a copy of the contents here for your review. The safety label is located on the back panel.
6 Regency CLASSIC C33-2 Freestanding Gas Stove INST ALLA TION IMPORT ANT : SA VE THESE INSTRUCTIONS The CLASSIC Freestanding Gas Stove must be installed in accordance with these instructions.
Regency CLASSIC C33-2 Freestanding Gas Stove 7 Diagram 4 9) Lift the fan assembly in through the pedes- tal and up through the cut out as shown in diagrams 3 and 4. 10) Put the insulation gasket on the back of the fan. Line up the keyhole slots with the matching screws and pull back slightly to lock into place.
8 Regency CLASSIC C33-2 Freestanding Gas Stove INST ALLA TION PEDEST AL ASSEMBL Y 1) For easier assembly, tip the stove on its back (preferably onto a soft surface to prevent scratching). 2) Unscrew the 4 bolts in the underside of the stove. Align the holes in the corners of the pedestal top with the corresponding holes in the base of the stove.
Regency CLASSIC C33-2 Freestanding Gas Stove 9 VENTING This heater is a vented appliance and must be connected to a chimney/flue in accordance with installation codes. Note: The rear cover plate is only at- tached when outside air is being used. Do not install it when using room air for combustion.
10 Regency CLASSIC C33-2 Freestanding Gas Stove HIGH ELEV A TION This unit is approved in Canada for altitude 0 to 4500 ft. (CAN1 2.17-M90) with the orifice sup- plied.
Regency CLASSIC C33-2 Freestanding Gas Stove 11 Diagram 2 LOG SET INST ALLA TION WARNING: Dangerous operating conditions may occur if these logs are not positioned in their approved locations. Read the instructions below carefully and refer to the diagrams.
12 Regency CLASSIC C33-2 Freestanding Gas Stove FINAL CHECK Before leaving this unit with the customer, the installer must ensure that the appliance is firing correctly. This includes: 1) Clocking the appliance to ensure the correct firing rate (rate noted on label) after 15 minutes.
Regency CLASSIC C33-2 Freestanding Gas Stove 13 INST ALLA TION It is possible that you will hear some sounds from your gas appliance. This is perfectly normal due to the fact that there are various gauges and types of steel used within your appliance.
14 Regency CLASSIC C33-2 Freestanding Gas Stove OPERA TING INSTRUCTIONS LIGHTING PROCEDURE IMPORTANT: Gas cock knob cannot be turned from "PILOT" to "OFF" unless it is partially depressed. 1) Turn burner OFF using "ON/OFF" switch.
Regency CLASSIC C33-2 Freestanding Gas Stove 15 COPY OF THE LIGHTING PLA TE INSTRUCTIONS OPERA TING INSTRUCTIONS 1 ) Push in the gas control knob slightly and turn clockwise to “OFF”. Do not force. FOR YOUR SAFETY READ BEFORE LIGHTING A ) This appliance has a pilot which must be lighted by hand, following the instructions below exactly.
16 Regency CLASSIC C33-2 Freestanding Gas Stove PILOT ADJUSTMENT Periodically check the pilot flames. Cor- rect flame pattern has three strong blue flames: 1 flowing around the thermopile, 1 around the thermocouple and 1 flowing across the burner (it does not have to be touching the burner).
Regency CLASSIC C33-2 Freestanding Gas Stove 17 7) Install the replacement glass. When placing the replacement glass in the door, make sure that the glass gasketing will properly seal your unit. 8) Put glass in place and then position glass retainer rod.
18 Regency CLASSIC C33-2 Freestanding Gas Stove MAINTENANCE 8) If optional fan is installed, remove thermo- disc to bracket by removing three (3) phillips head M5 screws. 9) Remove front cover with Piezo Igniter by removing two (2) sheet metal screws.
Regency CLASSIC C33-2 Freestanding Gas Stove 19 MAIN ASSEMBL Y PARTS LIST P ar t # Description 1 ) 846-913 Door Assy-Gold (no glass) 846-915 Door Assy-Black (no glass) 3 ) 846-302 S mall G lass 4 ) 93.
20 Regency CLASSIC C33-2 Freestanding Gas Stove PARTS LIST BURNER & LOGS P ar t # Description 52) 910-190 Pie zo Ig nito r & Nu t 53 ) * Control Panel 908-672 Control Panel Decal 462-560/P Valve Assembly - S.I.T. - NG 462-561/P Valve Assembly - S.
Regency CLASSIC C33-2 Freestanding Gas Stove 21 BASE OPTIONS PARTS LIST 490-921 Complete Floor Shield 100) 948-216 Regency Logo 102) 904-257 Magnetic Catch (Large) 103) * 11" Pedestal Hinge 108) 910-246 Bu rner ON/ OFF Sw itch (2-way) 109) 910-272 LT.
22 Regency CLASSIC C33-2 Freestanding Gas Stove _____________________________________________________________________________________ ____________________________________________________________ _____.
Regency CLASSIC C33-2 Freestanding Gas Stove 23 W ARRANTY Regency Fireplace Products are designed with reliability and simplicity in mind. In addition, our internal Quality Assurance Team carefully inspects each unit thoroughly before it leaves our facility.
Installer: Please complete the following information Dealer Name & Address: ______________________________________________ __________________________________________________________________ Instal.
An important point after buying a device Regency C33-LP2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Regency C33-LP2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Regency C33-LP2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Regency C33-LP2 you will learn all the available features of the product, as well as information on its operation. The information that you get Regency C33-LP2 will certainly help you make a decision on the purchase.
If you already are a holder of Regency C33-LP2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Regency C33-LP2.
However, one of the most important roles played by the user manual is to help in solving problems with Regency C33-LP2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Regency C33-LP2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
