Instruction/ maintenance manual of the product 2250 Regalo
Go to page of 13
DOUBLE SIDED SWING DOWN BED RAIL Model: 2250 FOR THE MOST IMPORTANT PEOPLE IN THE WORLD Regalo International, LLC. 3200 Corporate Center Drive, Suite 100 Burnsville, MN 55306-9803, USA Toll Free: 866-272-5274 Made in China ............................
1 IMPORTANT ! KEEP FOR FUTURE REFERENCE ! • Failure to follow these instructions for the assembly and use of your bed rail could result in serious injury or death.
2 PART LIST : 1. Bed Rail Mesh Wall (X2) 2. Left Upper Support Bar (X2) 3. Right Upper Support Bar (X2) 4. Left Bottom Support Bar (X2) 5. Right Bottom Support Bar (X2) 6.
3 Step 1 : Remove bed rails from packaging and set all parts out in fron t of you. Step 3 : Repeat Step 2 directions to assemble the right side. (Diagram A2) Step 2 : (Diagram A1) Assemble one side of the double bed rail completely before assembling the second side.
4 Frame assembly should look like the image below. (Diagram B2) NOTE : If the zipper does not close securely, make the necessary adjustments to ensure proper closure.
5 Note: Each set of corner hinges is permanently connected by an anchoring strap. On one side of each set, the strap is adjustable. The adjustable sides should be mounted to the same side wall assembly. Step 7: With the walls of the bed rail completely assembled, you will now connect them to the corner hinges and anchor straps.
7 Note : The finished assembly should look like the image below In order to adjust the bed rail to fit your specific bed properly, you may need to release the strap locking buckles located on the under side of the plastic hinges. The anchoring straps should not be twisted.
8 (Diagram E1) Step 2: (Diagram E2) Once the bed rail is placed properly, place the mattress back atop of the box spring or mattress support sandwiching the flat metal bars of the corner hinges and the anchoring straps between the box spring and the mattress.
9 Step 4 : If the strap does not pull through smoothly, the strap may be twisted under the mattress. Correct this before continuing with the installation. Once you have taken the slack out of the straps, give one final pull on the strap end, hold it, and lock the locking tab on the locking buckle by pushing up on the thumb tab.
Step 1: With the bed rail side in the ‘up’ position, locate the locking tab on each of the hinges. (Diagram F) A close up view of the hinge is shown in (Diagram G1) . Step 2: Once the locking tabs have been located, flip the tab up to expose the open side of the lock.
11 Step 3 : With both locking tabs turned to the ‘open’ position, hold the upper part of the bed rail firmly and swing it down. (Diagram H1) The bed rail should now be in the ‘down’ position. (Diagram H2) NOTE : To return the bed rail to the ‘up’ position, reverse the previous instructions.
CARE AND MAINTENANCE Periodically check the bed rail for signs of damage, wear and/or for missing components. Do not use if any part is missing, worn or damaged. Check the bed rail regularly to make sure all hardware and mountings are tight and secure.
09/12/2013_EV COPYRIGHT 2013 Regalo International, LLC. 3200 Corporate Center Drive, Suite 100 Burnsville, MN 55306-9803, USA Toll Free: 866-272-5274 Made in China.
An important point after buying a device Regalo 2250 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Regalo 2250 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Regalo 2250 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Regalo 2250 you will learn all the available features of the product, as well as information on its operation. The information that you get Regalo 2250 will certainly help you make a decision on the purchase.
If you already are a holder of Regalo 2250, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Regalo 2250.
However, one of the most important roles played by the user manual is to help in solving problems with Regalo 2250. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Regalo 2250 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
