Instruction/ maintenance manual of the product 2015 Regalo
Go to page of 13
CONVERTIBLE CRIB RAIL INSTRUCTIONS Model: 2015 FOR THE MOST IMPORTANT PEOPLE IN THE WORLD Regalo International, LLC. 3200 Corporate Center Drive, Suite 100 Burnsville, MN 55306-9803, USA Toll Free: 866-272-5274 Made in China ..........................
1 IMPORTANT ! KEEP FOR FUTURE REFERENCE ! • Failure to follow these instructions for the assembly and use of your crib rail could result in serious injury or death.
2 PART LIST : 1. Crib Rail Mesh Wall 2. Right Upper Support Bar 3. Left Upper Support Bar 4. Right Bottom Support Bar 5. Left Bottom Support Bar 6. Right Under Bar 7.
3 Step 1 : Remove crib rail from packaging and set all parts out in fron t of you. Step 3 : Repeat Step 2 directions to assemble the right side of the crib rail. (Diagram A2) Step 2 : Insert Left Upper Support Bar into Left Bottom Support Bar. Make sure the spring pin fits securely into opposing hole so that the two pieces cannot pull apart.
4 Frame assembly should look like the image below. (Diagram B2) NOTE : If the zipper does not close securely, make the necessary adjustments to ensure proper closure.
5 With completion of Step 7, the assembly of your crib rail is now complete. It is now ready to be installed on your convertible crib! Step 6: With the wall of the crib rail completely assembled, you will now connect the remaining legs with the anchor straps.
6 Note : The next steps may require the help of a secondary person. You may need to release the strap locking buckles located on the under side of the plastic hinges. Ensure that the large end of the anchor is pointing up. The anchoring straps should not be twisted.
7 (Diagram E2) Step 2: Once the crib rail is properly placed, check to make sure the left and right Guide Bar Assemblies are parallel to one another. Then, place the mattress on top of the assembly.
8 Step 4 : If the strap does not pull through smoothly, the strap may be twisted under the mattress. Correct this before continuing with the installation. Once you have taken the slack out of the straps, give one final pull on the strap end, hold it, and lock the locking tab on the locking buckle by pushing up on the thumb tab.
Step 1: With the crib rail side in the ‘up’ position, locate the locking tab on each of the hinges. (Diagram F) A close up view of the hinge is shown in (Diagram G1) . Step 2: Once the locking tabs have been located, flip the tab up to expose the open side of the lock.
10 Step 3 : With both locking tabs turned to the ‘open’ position, hold the upper part of the crib rail firmly and swing it down. (Diagram H1) The crib rail should now be in the ‘down’ position. (Diagram H2) NOTE : To return the crib rail to the ‘up’ position, reverse the previo us instructions.
CARE AND MAINTENANCE Periodically check the crib rail for signs of damage, wear and/or for missing components. Do not use if any part is missing, worn or damaged. Check the crib rail regularly to make sure all hardware and mountings are tight and secure.
06/21/2013_DC COPYRIGHT 2013 Regalo International, LLC. 3200 Corporate Center Drive, Suite 100 Burnsville, MN 55306-9803, USA Toll Free: 866-272-5274 Made in China.
An important point after buying a device Regalo 2015 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Regalo 2015 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Regalo 2015 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Regalo 2015 you will learn all the available features of the product, as well as information on its operation. The information that you get Regalo 2015 will certainly help you make a decision on the purchase.
If you already are a holder of Regalo 2015, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Regalo 2015.
However, one of the most important roles played by the user manual is to help in solving problems with Regalo 2015. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Regalo 2015 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
