Instruction/ maintenance manual of the product TREADMILL RBTL97105.0 Reebok
Go to page of 30
USER'S MANUAL Serial Number Decal Model No. RBTL97105.0 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction.
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side.
2 1. Do not change the incline of the treadmill by p lacing objects under the treadmill. 22. When folding or moving the treadmill, make sure that the storage latch is fully closed. 23. Inspect and properly tighten all parts of the treadmill regularly.
5 Thank you for selecting the revolutionary REEBOK ® 8400 C treadmill. The 8400 C treadmill offers a selec- tion of features designed to make your workouts at home more effective and enjoyable. A nd wh en you ’re not exercising, the unique 8400 C tre admil l can be folded up, requiring less than half the floor space than traditional treadmills.
ASSEMBL Y A ssembly requires two persons. S et the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench and your own phillips screwdriver , wire cutters , and rubber mallet .
7 2. Insert the tab on one of the Handrail Brackets (70) into the indicated slot in the right Upright (69). Attach the H andrail Bracket with a 3/4” Tek Screw (65). A ttach the other Handrail Bracket (not shown) to the left Upright (not shown) the same way.
8 8. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrench in a secure place; the allen wrench is used to adjust the walking belt (see page 23). To protect the floor or carpet from damage, place a mat under the treadmill.
9 If you purchase the optional chest pulse sensor (see page 19), follo w the steps below to i nstall the re- ceive r inc luded with the chest pulse sensor. 1 . M ake sure that the power cord is unplugged. R emove the indicated screws from the Console Back (88).
10 OPERA TION AND ADJUSTMENT T HE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- i cone spray or other substances to the walking b elt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.
1 1 FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features designed to make your workouts more effective. When the manual mode of the console is selected, you can change the speed and incline of the treadmill with the touch of a button.
12 HOW TO TURN ON THE POWER P lug in the power cord (see page 10). Next, locate t he reset/off circuit breaker on the treadmill near the power cord. Make sure that the circuit breaker is in the reset position. Next, stand on the foot rails of the treadmill.
13 The lower right corner of the display will show t he distance that you have walked or run, t he elapsed time, your pace in minutes per mile, and the speed of the walking belt.
14 H OW TO USE A PERSONAL TRAINER PROGRAM I nsert the key into the console. S ee HOW TO TURN ON THE POWER on page 12. S elect one of the personal trainer programs.
15 Measure your heart rate if desired. See step 6 on page 13. Turn on the fans if desired. S ee step 7 on page 13. When you are finished exercising, remove the key from the console. When the program ends, make sure that the in- cline of the treadmill is at the lowest setting.
16 H OW TO USE A CUSTOM PROGRAM I nsert the key into the console. S ee HOW TO TURN ON THE POWER on page 12. S elect one of the custom programs. To select a custom program, press Custom & Heart Rate C ontro l Programs button repeatedly; “P-11” or “P-12” will appear in t he pr iorit y disp lay for a few seconds.
H OW TO USE A HEART RATE PROGRAM Follow the steps below to use a heart rate program. Put on the optional chest pulse sensor. You must wear the optional chest pulse sensor to use a heart rate program. Insert the key into the console. See HOW TO TURN ON THE POWER on page 12.
18 When the first segment ends, all target heart rate settings will move one column to the left. The tar- g et heart rate setting for the second segment will then be shown in the flashing Current Segment c olumn. During each heart rate program, the console will regularly compare your heart rate to the target heart rate setting.
19 THE INFORMATION MODE/DEMO MODE T he console features an information mode that keeps track of treadmill usage information. The information m ode also allows you to select miles or kilometers as the unit of measurement and to turn on and turn off the demo mode.
20 HOW T O FOLD AND MOVE THE TREADMILL H OW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be p ermanently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.
21 HOW TO LOWER THE TREADMILL FOR USE 1 . Hold the upper end of the treadmill with your right hand a s shown. Using your left hand, pull the latch knob to the left and hold it. Pivot the treadmill down until the frame is past the pin on the lock knob.
TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
23 PROBLEM: The walking belt slows when walked on S OLUTION: a . Use only a single-outlet surge suppressor that meets all of the specifications described on page 10. b . If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged.
24 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
25 SUGGESTED STRETCHES T he correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1 . Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
P ART LIST—Model No. RBTL97105.0 R 0506A To identify the parts listed below, see the EXPLODED DRAWING in the center of this manual. 1 2 Foot Rail Insert 2 2 Foot Rail 3 1 Front Roller Nut 4 1 Left F.
27 101 1 Left Fan Grill 102 2 Extension Leg 103 2 Extension Cap 104 2 Incline Warning Decal 1 05 2 Console Fan 106 1 Right Cup Holder 107 1 Left Cup Holder 108 1 Book Holder 1 09 1 Power Cord Grommet .
45 46 45 46 27 28 27 29 1 2 88 4 5 6 7 8 9 10 27 12 13 19 9 21 27 30 27 20 32 9 6 5 37 88 36 9 24 38 83 42 43 83 65 65 47 1 11 2 51 1 53 52 14 27 57 58 59 60 59 61 35 1 10 35 62 109 1 11 47 87 64 65 88 53 96 1 11 74 74 1 11 86 86 75 31 31 50 41 18 16 35 26 39 25 9 17 1 1 34 15 88 49 67 67 73 3 54 EXPLODED DRA WING—Model No.
89 27 91 92 94 93 99 100 100 103 104 102 97 98 104 20 95 94 93 23 100 68 78 79 79 69 84 95 20 76 90 82 40 105 101 105 33 87 88 88 87 88 87 88 87 87 87 87 1 11 87 87 87 87 87 106 87 87 107 80 87 87 103.
Part No. 232920 R0506A Printed in USA © 2006 ICON IP, Inc. LIMITED W ARRANTY WHAT IS COVERED—The entire REEBOK 8400 C (“Product”) is warranted to be free of all defects in material and work- manship. WHO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original purchaser.
An important point after buying a device Reebok TREADMILL RBTL97105.0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Reebok TREADMILL RBTL97105.0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Reebok TREADMILL RBTL97105.0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Reebok TREADMILL RBTL97105.0 you will learn all the available features of the product, as well as information on its operation. The information that you get Reebok TREADMILL RBTL97105.0 will certainly help you make a decision on the purchase.
If you already are a holder of Reebok TREADMILL RBTL97105.0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Reebok TREADMILL RBTL97105.0.
However, one of the most important roles played by the user manual is to help in solving problems with Reebok TREADMILL RBTL97105.0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Reebok TREADMILL RBTL97105.0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
