Instruction/ maintenance manual of the product RX9200 RBTL22921 Reebok
Go to page of 34
Model No. RBTL22921 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this man- ual for future reference.
2 ® T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 W ARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions.
20. When using iFIT.com CDs and videos, an electronic “chirping” sound will alert you when the speed and/or incline of the treadmill is about to change. Always listen for the “chirp” and be prepared for speed and/or in- cline changes. In some instances, the speed and/or incline may change before the per- sonal trainer describes the change.
5 Thank you for selecting the new REEBOK ® RX 9200 treadmill. The RX 9200 treadmill combines advanced technology with innovative design to help you get the most from your exercise program in t he co nveni ence of your home.
6 ASSEMBL Y Assembly requires two people. Place the treadmill in a cleared area and remove all packing materials. Do not dispo se of the packing materials until the treadmill is assembled. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
4. Raise the treadmill to the storage position (see HOW TO FOLD THE TREADMILL FOR STORAGE on page 24). Have a second person hold the treadmill in the upright posi- tion. Position the U-base (20) against the base of the Uprights (65) as shown, wi th t h e Bumpers (98) under the U-base.
8 HOW TO PUT ON THE CHEST PULSE SENSOR The chest pulse sensor consists of two components: the chest strap and the sensor unit (see the drawing below ). Insert the tab on one end of the chest strap into one end of the sensor unit, as shown in the inset draw- ing.
9 THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form. Such substances will deteriorate the walking belt and cause excessive wear.
10 FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features designed to make your workouts more effec- tive. When the manual mode of the console is selected, the speed and incline of the treadmill can be changed with a touch of a button.
11 HOW TO TURN ON THE POWER Plug in the power cord (see page 9). Locate the on/off cir- cuit breaker near the power cord. Move the on/off circuit breaker to the reset position. Stand on the foot rails of the treadmill. Find the clip attached to the key (see the drawing on page 10) and slide the clip onto the waistband of your cloth es.
12 Pulse/Calories/Fat Calories display —This display shows the ap- proximate numbers of calories and fat calories you have burned (see FAT BURNING on page 29).
13 HOW TO USE PRESET WORKOUT PROGRAMS Insert the key fully into the console. See HOW TO TURN ON THE POWER on page 11. Select one of the preset workout programs.
14 To stop the program temporarily, press the Stop button. The Time/Segment Time/Pace display will beg in to flash. To restart the program, press the Sta rt button or the S peed s s butto n. To end the program, press the Stop button, remove the key, and then reinsert the key.
15 During heart rate pro- grams, the LED matrix will show a graphic that represents your heart rate. Each time a heart- beat is detected, an ad- ditional peak will ap- pear.
16 HOW TO CREATE CUSTOM PROGRAMS Insert the key fully into the console. See HOW TO TURN ON THE POWER on page 11. Select one of the custom programs. When the key is in- serted, the manual mode will automatically be selected.
17 HOW TO USE CUSTOM PROGRAMS Insert the key fully into the console. See HOW TO TURN ON THE POWER on page 11. Select one of the custom programs. When the key is in- serted, the manual mode will automatically be selected.
18 HOW TO CONNECT THE TREADMILL TO YOUR CD PLAYER, VCR, OR COMPUTER To use iFIT.com CDs , the treadmill must be con- nected to your portable CD player, portable stereo, home stereo, or computer with CD player. See pages 18 and 19 for connecting instructions.
19 HOW TO CONNECT YOUR HOME STEREO Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B. A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord.
20 HOW TO CONNECT YOUR VCR Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 19.
21 If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the Speed or Incline buttons on the console. However, when the next “chirp” is heard, the speed and/or incline will change to the next settings of the CD or video program.
22 HOW TO USE PROGRAMS DIRECTLY FROM OUR WEB SITE Our Web site at www.iFIT.com allows you to access basic programs, audio programs, and video programs directly from the internet. Additional options are s oon t o be available. See www.iFIT.com for details.
23 THE INFORMATION MODE/DEMO MODE The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also al- lows you to switch the console from miles per hour to kilometers per hour.
HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.
25 PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 9). Use onl y a sing le-o utl et s urge sup pre ssor that meets all of the specifications described on page 9.
26 PROBLEM: The walking belt is off-center or slips when walked on SOLUTION: a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD .
27 Reebok University was launched in 1993 to fulfill a vision to establish a “university without walls” that develops quality, researched, state-of-the-art fitness programming for the fitness industry throughout the world.
28 Several studies have reported that regular walking at moderate to brisk speeds appears to increase bone density. Specifically, Fradin and his colleagues 6 found that 70-year-old subjects who walked at least 30 min- utes per day had higher bone mineral content than subjects who walked less than 30 minutes per day.
29 The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with the proper intensity.
30 1 1 Left Foot Rail 2 1 Chest Strap 3 1 Audio Wire 4 4 Isolator 5 1 Latch Insert 6 1 Walking Platform 7 4 Walking Platform Screw 8 1 Walking Belt 9 2 Frame Pivot Bolt 10 2 1/2” Screw 11 1 Front Ro.
111 1 Pulley Spacer 112 2 Shield Screw 113 2 Static Decal 114 1 Book Plate 115 1 Idler Pulley Bolt 116 1 Right Foam Grip 117 1 Console Base 118* 1 Latch Assembly 119 1 Right Fan Cover 120 1 Left Fan C.
56 9 15 14 13 89 18 22 24 17 127 44 16 32 29 121 32 29 126 39 126 9 12 7 7 57 40 42 53 52 59* 63 109 64 1 1 1 79 1 10 13 1 15 99 122 7 7 57 40 48 47 54 137 40 55 1 1 6 58 27 84 19 45 19 8 46 44 28 1 1.
83 43 95 97 96 106 107 13 77 78 13 77 78 98 34 86 88 88 62 1 16 65 1 17 80 1 13 85 40 40 40 40 93 93 82 40 40 40 120 61 101 101 87 87 76 76 40 40 66 66 40 40 66 1 19 44 44 44 49 123 75 75 92 136 125 9.
Part No. 198683 R0703A Printed in USA © 2003 ICON Health & Fitness, Inc. LIMITED W ARRANTY WHAT IS COVERED—The entire Reebok ® RX 9200 treadmill (“Product”) is warranted to be free of all defects in mater- ial and workmanship.
An important point after buying a device Reebok RX9200 RBTL22921 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Reebok RX9200 RBTL22921 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Reebok RX9200 RBTL22921 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Reebok RX9200 RBTL22921 you will learn all the available features of the product, as well as information on its operation. The information that you get Reebok RX9200 RBTL22921 will certainly help you make a decision on the purchase.
If you already are a holder of Reebok RX9200 RBTL22921, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Reebok RX9200 RBTL22921.
However, one of the most important roles played by the user manual is to help in solving problems with Reebok RX9200 RBTL22921. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Reebok RX9200 RBTL22921 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
