Instruction/ maintenance manual of the product AMP-610 Audiovox
Go to page of 16
Ow Ow Ow Ow Ow ne ne ne ne ne r's r's r's r's r's Manual Manual Manual Manual Manual Model AMP-610 500 W att Stereo Amplifier.
INDEX Specifications .............................................................................1 Precautions ................................................................................2 Installation Instructions ...............................
HIGH PERFORMANCE STEREO AMPLIFIER This power amplifier has been designed to provide high quality performance with a minimum of maintenance. However, it's performance will only be as good as the care and quality of components with which it is installed.
PRECAUTIONS 1. Although this unit is designed with built-in self-protection circuits, there may be a possibility of damage if it is not wire d correctly. Please follow the wiring instructions carefully for the type of system being used. 2. The last lead to be connected is the wire to the positive ( + ) terminal of the battery.
INSTALLATION INSTRUCTIONS INSTALLATION DIAGRAM 1. Select a mounting area where the amplifier will have sufficient air circulation for proper cooling. Inadequate air circulation will cause the temperature of the amplifier to rise and will trigger the thermal protection mode.
2 3 4 1 6 5 8 2 CONTROLS AND INDICATORS 7 9 -4-.
1 Power Indicator/Protection Mode LED The Power Indicator LED will light to indicate that the unit is connected to the battery and that the Remote Turn-On terminal is receiving +12 volts, thus turning o n the amplifier.
4 High Level Input Connection If the car stereo does not provide low-level outputs, the amplifier may be connected via the speaker (high-level) outputs from the stereo.
The wiring of your amplifier will depend on the system and speakers you are using but will either be a stereo, mono, or mixed- mono application. The following pages illustrate the input and output wiring for both types. Please refer to the appropriate diagrams for the system configuration you are using.
-8- USE THIS INPUT WIRING WITH OUTPUT WIRING ON PAGE 9 4-CHANNEL AND MIXED-MONO INPUT WIRING DIAGRAM LOW-LEVEL RCA OUTPUT S HIGH-LEVEL (SPEAKER) OUTPUTS CAR STEREO LEFT REAR + RIGHT REAR + RIGHT FRONT + GREEN WHITE BLACK BROWN GRAY CH1 CH2 CH3 CH4 IMPORTANT USE EITHER HIGH-LEVEL OR LOW-LEVEL INPUTS, NOT BOTH.
-9- LEFT FRONT SPEAKER SPEAKER IMPEDANCE 4-CHANNEL MODE : 2-8 OHMS MIXED-MONO MODE : 4-8 OHMS RIGHT REAR SPEAKER RIGHT FRONT SPEAKER LEFT REAR SPEAKER USE THIS OUTPUT WIRING WITH INPUT WIRING ON PAGE .
-10- USE THIS INPUT WIRING WITH OUTPUT WIRING ON PAGE 11 3-CHANNEL INPUT WIRING DIAGRAM CAR STEREO LOW-LEVEL RCA OUTPUTS MONO OR SUB-WOOFER GREEN WHITE BLACK BROWN GRAY RCA TYPE SHIELDED CABLES (NOT INCLUDED) IMPORTANT USE EITHER HIGH-LEVEL OR LOW-LEVEL INPUTS, NOT BOTH.
-11- AUTO-ANTENNA LEAD USE #10 GAUGE WIRE (SEE TEXT) CAR STEREO CONNECT THIS WIRE LAST EXISTING SCREW OR BOLT CLEAN PAINT, RUST, DIRT OR GREASE FROM AREA FOR GOOD CONNECTION GROUNDED METAL SECTION OF .
HIGH-LEVEL (SPEAKER) OUTPUTS CAR STEREO USE THIS INPUT WIRING WITH OUTPUT WIRING ON PAGE 13 2-CHANNEL MONO (BRIDGED) INPUT WIRING DIAGRAM LOW-LEVEL RCA OUTPUTS RIGHT LEFT IMPORTANT USE EITHER HIGH-LEVEL OR LOW-LEVEL INPUTS, NOT BOTH.
USE THIS OUTPUT WIRING WITH INPUT WIRING ON PAGE 12 2-CHANNEL MONO (BRIDGED) OUTPUT WIRING DIAGRAM LEFT SPEAKER OR SUB-WOOFER 4 - 8 OHMS RIGHT SPEAKER OR SUB-WOOFER 4 - 8 OHMS EXISTING SCREW OR BOLT C.
AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in mater.
An important point after buying a device Audiovox AMP-610 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox AMP-610 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox AMP-610 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox AMP-610 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox AMP-610 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox AMP-610, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox AMP-610.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox AMP-610. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox AMP-610 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
