Instruction/ maintenance manual of the product AMP-590A Audiovox
Go to page of 12
Owner's Owner's Owner's Owner's Owner's Manual Manual Manual Manual Manual Model AMP-590A 150 W att S tereo Amplifier.
128-5412 S H T .2O F1 2 INDEX Specifications ...........................................................1 Precautions ..............................................................2 Installation Instructions ...........................................
* Due to continuing improvement, Audiovox reserves the right to change features and design without notice. HIGH PERFORMANCE STEREO AMPLIFIER This power amplifier has been designed to provide high quality performance with a minimum of maintenance.
PRECAUTIONS 1. Although this unit is designed with built-in self-protection circuits, there may be a possibility of damage if it is not wired correctly. Please follow the wiring instructions carefully for the type of system being used. 2. The last lead to be connected is the wire to the positive ( + ) terminal of the battery.
INSTALLATION INSTRUCTIONS INSTALLATION DIAGRAM 1. Select a mounting area where the amplifier will have sufficient air circulation for proper cooling. Inadequate air circulation will cause the temperature of the amplifier to rise and will trigger the thermal protection mode.
WIRING INSTRUCTIONS The power and speaker wire connections for this amplifier are made via screw tightened terminal blocks. Loosen the screw for the connection to be made and fully insert the wire (st.
4. Speaker Connections Depending on the type and number of speakers used with the amplifier, wire them to the speaker terminals as per the appropriate wiring diagram. For most applications, #18 gauge wire should be used for the speaker leads but in no case thinner than #20 gauge.
INPUT WIRING DIAGRAM -6- 5-PIN CONNECTOR IMPORTANT USE EITHER HIGH-LEVEL OR LOW-LEVEL INPUTS, NOT BOTH. HIGH-LEVEL (SPEAKER) OUTPUTS CAR STEREO RCA TYPE SHIELDED CABLE (NOT INCLUDED) RIGHT + RIGHT - L.
OUTPUT WIRING DIAGRAM -7- AUTO-ANTENNA LEAD CAR STEREO WARNING! THIS AMPLIFIER IS DESIGNED FOR USE WITH 2 SPEAKERS NEVER COMBINE (BRIDGE) OUTPUTS FOR USE WITH 1 SPEAKER. NEVER GROUND NEGATIVE SPEAKER LEADS TO CHASSIS GROUND. FAILURE TO WIRE CORRECTLY MAY CAUSE DAMAGE TO THE AMPLIFIER.
PWR R L LOW INPUT HIGH LEVEL GAIN MIN MAX POWER BATT GND REM LEFT RIGHT LEFT RIGHT SPEAKER OUTPUT FUSE -8- OPERATION After initial set-up, the amplifier should not require any further adjustment unless there is a change in the car stereo or speaker system with which it is used.
-9- AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in m.
© 1998 Audiovox Corp., Hauppauge, N.Y. Printed in Korea Form No. 128-5412.
An important point after buying a device Audiovox AMP-590A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox AMP-590A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox AMP-590A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox AMP-590A you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox AMP-590A will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox AMP-590A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox AMP-590A.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox AMP-590A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox AMP-590A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
