Instruction/ maintenance manual of the product RBBE2057.0 Reebok Fitness
Go to page of 20
Model No. RBBE2057.0 Serial No. Write the serial number in the space above for future reference. QUESTIONS? As a manufacturer , we are com- mitted to providing complete cus- tomer satisfaction. If y ou hav e questions, or if parts are missing, PLEASE DO NOT CONT ACT THE STORE; please contact Customer Care.
2 W ARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 W ARNING: T o reduce the risk of serious injury , read all important precautions and instructions in this manual and all warnings on the inversion table before using the inversion table. I CON assumes no responsibility for personal injury or property damage sustained by or through the use of the inversion table.
4 Handle Left Frame Long Adjustment Knob Backrest Headrest Foot Plate Ankle Brace Ankle Lock Assembly Index Handle Short Adjustment Knob Right Frame ASSEMBLED DIMENSIONS: Height: 62 in. (157 cm) Width: 36 in. (91 cm) Depth: 66 in. (168 cm) BEFORE YOU BEGIN Thank you for selecting the versatile REEBOK ® INVERSION SYSTEM inversion table.
5 M10 Nylon Locknut (65) M8 Nylon Locknut (72) M6 W asher (62) M4 x 15mm Screw (58) M10 x 85mm Button Bolt (51) M10 x 95mm Button Bolt (73) M6 x 18mm Button Screw (55) M6 x 55mm Button Screw (56) M4 x.
6 1. Press a 63mm Round Cap (40) onto the Left Base (1). Attach a Foot (42) to the Left Base (1) with an M4 x 20mm Screw (71). Next, tighten a Leveling Foot (41) into the Left Base. Repeat this step for the Right Base (2). 1 Before beginning assembly , make sure that you understand the information in the box above.
7 2. Attach the Left Base (1) to the Right Base (2) with two M10 x 80mm Button Bolts (52), four M 10 Curved W ashers (50), and two M10 Nylon Locknuts (65). Attach another Foot (42) to the Right Base (2) with an M4 x 20mm Screw (71). 2 2 1 5 2 50 5 0 65 71 42 3.
8 5. Attach the Center Base (3) to the Left and Right Bases (1, 2) with four M10 x 80mm B utton Bolts (52), four M10 Curved W ashers (50), and four M10 Nylon Locknuts (65). 5 52 50 50 3 65 50 50 52 52 2 1 6. See the inset drawing. Identify the Center Frame (7).
9 8. Attach the T op Cover (23) and the Bottom Cover (24) to the Center Frame (7) with two M4 x 15mm Screws (58) and an M4 x 30mm Screw (63). Attach the Center Frame Extension (6) to the Center Frame (7) with two M10 x 53mm Button Bolts (49) and two M10 Nylon Locknuts (65).
10 11 . See the left inset drawing. Identify the T op T ube (16), the Bottom T ube (17), and the Ankle Brace T ube (18); the T ubes have differ- ent lengths and holes in different positions.
1 1 14. Identify the two Rear Ankle Braces (34), which have holes in the indicated locations. Slide a Rear Ankle Brace (34) onto the Ankle Brace T ube (18). Attach the Rear Ankle Brace with two M4 x 15mm Screws (58). Make sure that the Screws are tightened into the indi- cated holes in the Ankle Brace T ube.
12 1 6. Pull the Short Adjustment Knob (74) out as far as it will go, and insert the end of the Leg Frame (10) a few inches into the Backrest Frame (8). S ee the inset drawing. P ress the round tab on the Leg Frame Bushing (38), and press the Leg Frame Bushing upward into the Backrest Frame (8).
13 18. Attach a Handle (12) to the Left Frame (4) with two M10 x 80mm Button Bolts (52), two M10 C urved W ashers (50), and two M10 Nylon Locknuts (65). Attach the other Handle (12) in the same way . Make sure that all parts are properly tight- ened before you use the inversion table.
14 This section explains how to adjust the inversion table. See DEVELOPING A PROGRAM on page 17 for impor- tant information about how to get the most benefit from the inversion table. Make sure that all parts are properly tightened each time you use the inversion table.
15 11 33 19 1 0 34 SETTING THE INVERSION ANGLE The inversion table can be set to rotate between 15 ° and 90°, in 15° increments. T o set the inver- sion angle, pull the Index Handle (25) out as far as it will go, and turn the Index Handle until the arrow on top of the Index Handle points to the desired degree setting.
16 This section explains how to rotate back on the inversion table, and then return to the starting position. Before using the inversion table, see the ADJUSTMENT section starting on page 14 to correctly set up the inversion table. It may be helpful to have a second person ready to assist you as you learn to use the inversion table.
17 BENEFITING FROM USING THE INVERSION T ABLE If you feel nauseated while using the inversion table, return to the starting position. Note that it may take a few weeks of use for your inner ear to become accus- tom to being inverted. Do not use the inversion table right after you have eaten.
18 Key No. Qty . Description Key No. Qty . Description 1 1 Left Base 2 1 Right Base 3 1 Center Base 4 1 Left Frame 5 1 Right Frame 6 1 Center Frame Extension 7 1 Center Frame 8 1 Backrest Frame 9 1 He.
EXPLODED DRA WING—Model No. RBBE2057.0 R1207A 1 2 3 4 5 6 7 8 9 10 11 12 12 13 14 15 16 17 18 19 2 0 21 34 34 22 22 23 24 25 26 27 28 29 30 31 32 32 70 32 33 6 9 3 9 38 40 40 41 41 42 42 42 74 37 44.
LIMITED W ARRANTY Part No. 263046 R1207A Printed in China © 2007 ICON IP , Inc. ORDERING REPLACEMENT P ARTS ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and mate- rial, under normal use and service conditions, for a period of ninety (90) days from the date of purchase.
An important point after buying a device Reebok Fitness RBBE2057.0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Reebok Fitness RBBE2057.0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Reebok Fitness RBBE2057.0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Reebok Fitness RBBE2057.0 you will learn all the available features of the product, as well as information on its operation. The information that you get Reebok Fitness RBBE2057.0 will certainly help you make a decision on the purchase.
If you already are a holder of Reebok Fitness RBBE2057.0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Reebok Fitness RBBE2057.0.
However, one of the most important roles played by the user manual is to help in solving problems with Reebok Fitness RBBE2057.0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Reebok Fitness RBBE2057.0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
