Instruction/ maintenance manual of the product RBBE0787.0 Reebok Fitness
Go to page of 16
CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manu- al for future reference. Model No. RBBE0787.
W ARNING DECAL PLACEMENT 2 W ARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . .
3 W ARNING: T o reduce the risk of serious injury , read all important precautions and i nstructions in this manual and all warnings on the weight bench before using the weight bench. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of the weight bench.
4 Thank you for selecting the new REEBOK ® 95 AXB weight bench. The weight bench is designed to be used with your own weights to develop the major mus- cles of your upper body . For your benefit, read this manual carefully before using the weight bench.
See the drawings below to identify small parts used in assembly . The number in parentheses by each drawing is the key number of the part, from the PART LIST near the end of this manual. Important: Some small parts may have been preattached. If a part is not in the hardware kit, check to see if it has been preattached.
6 Before beginning assembly , carefully read the fol- lowing information and instructions: • T o hire an authorized service technician to assemble the weight bench, call 1-800-445-2480. • Assembly requires two persons. • Make sure tha t there is enough clearance to walk around the weigh t bench as you assemble it.
7 2. Attach the Rear Stabilizer (3) to the Frame (1) with two M8 x 63mm Bolts (16), two M8 W ashers (20), and two M8 Nylon Locknuts (24). Do not tighten the Nylon Locknuts yet. 3. Attach a Dumbbell T ube (10) to the Rear Stabilizer (3) and the Front Leg (2) with two M8 x 80mm Screws (13) and two M8 W ashers (20).
8 5. Attach the Backrest (7) to the Backrest Frames (5) with four M6 x 35mm Screws (15) and four M 6 W ashers (21). D o not tighten the Screws yet. 6. Insert the Pivot Bracket (6) into the slot in the Frame (1). Attach an M8 x 38mm Bolt (18), two Spacers (23), and an M8 Nylon Locknut (24) to the last hole in the Pivot Bracket.
9 9. Make sure that all parts are properly tight - ened before you use the weight bench. 8. Attach the Seat (8) to the Frame (1) with two M6 x 35mm Screws (15) and two M6 W ashers (21). 8 8 1 21 21 15 7 . Insert the Pin (9) into the Frame (1) and through an adjustment hole in the Pivot Bracket (6).
10 The weight bench is designed to be used with your own weight set (not included). The steps below explain how the weight bench can be adjusted. See EXERCISE GUIDELINES on page 1 1 for important exercise information, and refer to the accompanying exercise guide to see the correct form for several exercises.
11 EXERCISE GUIDELINES THE FOUR BASIC TYPES OF WORKOUTS Muscle Building T o increase the size and strength of your muscles, push them close to their maximum capacity . Y our mus- cles will continually adapt and grow as you progres- sively increase the intensity of your exercise.
12 Rest for a short period of time after each set. The ideal resting periods are: • Rest for three minutes after each set for a muscle building workout. • Rest for one minute after each set for a toning work- out. • Rest for 30 seconds after each set for a weight loss workout.
13 NOTES.
Key No. Qty . Description Key No. Qty . Description 1 1 Frame 2 1 Front Leg 3 1 Rear Stabilizer 4 1 1" x 2" Inner Cap 5 2 Backrest Frame 6 1 Pivot Bracket 7 1 Backrest 8 1 Seat 9 1 Pin/T eth.
1 3 5 6 7 8 10 10 11 11 1 2 13 16 14 19 15 17 15 18 18 18 18 21 21 21 21 20 20 20 22 23 22 23 24 24 15 21 24 11 11 13 20 20 2 16 20 24 9 4 21 EXPLODED DRA WING—Model No.
Part No. 257356 R0607A Printed in China © 2007 ICON IP , Inc. T o order replacement parts, please see the front cover of this manual. T o help us assist you, be prepared to pro- vide the following in.
An important point after buying a device Reebok Fitness RBBE0787.0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Reebok Fitness RBBE0787.0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Reebok Fitness RBBE0787.0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Reebok Fitness RBBE0787.0 you will learn all the available features of the product, as well as information on its operation. The information that you get Reebok Fitness RBBE0787.0 will certainly help you make a decision on the purchase.
If you already are a holder of Reebok Fitness RBBE0787.0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Reebok Fitness RBBE0787.0.
However, one of the most important roles played by the user manual is to help in solving problems with Reebok Fitness RBBE0787.0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Reebok Fitness RBBE0787.0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
