Instruction/ maintenance manual of the product 1070825E Redring
Go to page of 8
Page 1 of 8 T rouble Shooting All Models Redring SB Redring SB Professional On Wall Boiling Water Heater Models: 1070800E 2.5 ltr 1070810E 5 ltr 1070815E 7.
Contents Subject P age General Product Operation......................................................................2 Spares Diagram and List.........................................................................3 Unit Dimensions..................
Page 3 of 8 OVERSINK BOILING Ref Part No Description 1 1311010 Water Solenoid Valve 2 1311044 Condenser Assembly 3 Cold Water Inlet T o T ank 4 1311043 Thermistor Steam Sensor 5a Element & Tank As.
Problem Solving Symtom Solution Unit filling to low level but not heating 1. P ossible faulty PCB 2. Check Element 3. Check all wiring connections Unit not filling 1. Check top probe (No.11 page 3) and ensure that the probe is not in contact with tubing.
Page 5 of 8 Redring SB T ank access and replacing parts T ask Operation Front cover removal 1. T urn po wer and water off 2. Drain unit via tap, be carefull of boiling water . 3. Remove the tap assy by unscrewing counter -clockwise 4. Undo self-tapping screws, 2 at top and 2 at bottom of case.
Page 6 of 8 T ank access and replacing parts con’t. T ask Operation Replace Thermistor Steam Sensor 1. Directions as above in Cover Removal. 2. Remove PCB cover plate. 3. Remove the thermistor . 4. The probe end of the thermistor pushes into the condensor tube so that the tip just covers the hole drilled in the condensor tube.
Page 7 of 8 Redring SB Notes.
Page 8 of 8 Applied Energy Products Ltd, Morley Way , P eterborough. PE2 9JJ. England General enquiry T el +44 (0) 1733 456789 Fax +44 (0) 1733 310606 T echnical Hotline T el +44 (0) 8709 000430 Fax +.
An important point after buying a device Redring 1070825E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Redring 1070825E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Redring 1070825E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Redring 1070825E you will learn all the available features of the product, as well as information on its operation. The information that you get Redring 1070825E will certainly help you make a decision on the purchase.
If you already are a holder of Redring 1070825E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Redring 1070825E.
However, one of the most important roles played by the user manual is to help in solving problems with Redring 1070825E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Redring 1070825E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
