Instruction/ maintenance manual of the product BM46I RedMax
Go to page of 9
US-1 BM46I U S OWNER / OPERA T OR MANUAL BA CKP A CK SPRA YER MCO080103 (910) BM46I W ARNING This sprayer is not designed to be used with acids of any kind, corrosive products like caustic soda, gasoline, materials capable of generating heat, hot fluids, explosive or highly volatile products.
US-2 BM46I 1. Parts location ......................................................................3 2. Specifications .....................................................................3 3. Warning labels on the machine ............................
US-3 BM46I U S 1. Parts location 4. For safe operation 2. Specifications 1. Tank 2. Pump 3. Lid (cap) 4. Shoulder Strap 5. Hose 6. Wand 7. Nozzle, Spray Tip Set 1 3 2 4 5 6 7 Type ··········.
4. For safe operation US-4 BM46I ■ WORKING CONDITION 1. Refrain from operating the sprayer if you are tired, ill, or upset, or if you are under the influence of alcohol, drugs or medication. 2. To reduce the risk of injury when filling, using and/or cleaning the sprayer, always wear eye protection.
US-5 BM46I U S 4. For safe operation • Keep spray materials locked up and out of reach of children and animals. • Use only original manufacturer’s replacement parts. • As a rule, mix your chemicals in a separate container from which to fill the sprayer.
US-6 BM46I 5. Set up Hose clamps are not completely tight. Please tighten hose clamps prior to using. Hose clamps are left loose to extend life of gaskets and fittings. Oil cap gasket before using and lubricate weekly so the gasket will seal properly and prevent chemical leaks.
US-7 BM46I U S 6. Pre-operation 7. Operation Hose clamps are not completely tight. Please tighten hose clamps prior to using. Hose clamps are left loose to extend life of gaskets and fittings. Oil cap gasket before using and lubricate weekly so the gasket will seal properly and prevent chemical leaks.
US-8 BM46I 8. Maintenance 9. Storage Before you remove cap, be sure there is no pressure in the tank. in order to release pressure, invert unit upside down and squeeze spray pistol (aim away from you). Pressure will escape; when hissing stops, all pressure has been released.
US-9 BM46I U S LIMITED W ARRANTY FOR TWO (2) YEARS OF HOME USE, ONE (1) YEAR FOR COMMERCIAL USE AND NINETY (90) DAYS FOR RENTAL USE FROM THE DATE OF ORIGINAL PURCHASE,THE COMPANY, THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL PURCHASER, ANY PART OF PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP.
An important point after buying a device RedMax BM46I (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought RedMax BM46I yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data RedMax BM46I - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, RedMax BM46I you will learn all the available features of the product, as well as information on its operation. The information that you get RedMax BM46I will certainly help you make a decision on the purchase.
If you already are a holder of RedMax BM46I, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime RedMax BM46I.
However, one of the most important roles played by the user manual is to help in solving problems with RedMax BM46I. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device RedMax BM46I along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
