Instruction/ maintenance manual of the product BM40S RedMax
Go to page of 12
W ARNING W ARNING This sprayer is not designed to be used with acids of any kind, corrosive products like caustic soda, gasoline, materials capable of generating heat, hot fluids, explosive or highly volatile products. USE OF THESE AND OTHERS EXPOSE USERS TO SERIOUS INJURY AND EVEN DEATH.
SAFETY FIRST Instructions contained in warnings within this manual and warning seals marked with a symbol on the sprayer concern critical points which must be taken into consideration to prevent possible serious bodily injury , and for this reason you are requested to read all such instructions carefully and follow them without fail.
3 1. Parts location 3. W arning labels on the machine If warning label peel off or become soiled and impossible to read, you should contact the dealer from which you purchased the product to order new labels and affix them in the required location(s).
4 • Pay attention to the direction of the wind, do not work against the wind. • Never use the sprayer during windy conditions. • Never point a sprayer nozzle toward an open flame to avoid the possibility of igniting the unit, causing injury to yourself or damage to surroundings.
5 • Make sure the spray hose loops freely without kinking or squeezing. 4. After using sprayers and other equipment, CLEAN UP! Dispose of debris in trash receptacles. ■ MAINTENANCE 1. In order to maintain your product in proper working order, perform the maintenance and checking operations described in the manual at regular intervals.
6 6. Pre-operation Hose clamps are not completely tight. Please tighten hose clamps prior to using. Hose clamps are left loose to extend life of gaskets and fittings. Oil cap gasket before using and lubricate weekly so the gasket will seal properly and prevent chemical leaks.
7 Before you remove cap, be sure there is no pressure in the tank. in order to release pressure, invert unit upside down and squeeze spray pistol (aim away from you). Pressure will escape; when hissing stops, all pressure has been released. Remove pump assembly by turning counter-clockwise.
8.
9 11 . P a rts list BACKP ACK SPRA YER BM40S NOTE : 1. Use RedMax/ZENOAH genuine parts as specified in the parts list for repair and/or replacement. 2. RedMax/ZENOAH does not warrant the machines, which have been damaged by the use of any parts other than those specified by the company.
10 11 . Parts List : BM40S.
11 11 . Parts List : BM40S Key# Part KIT Number Description Q'ty 1 RMKIT01AS Tank strainer. 1 2 RMKIT527 Red tank Lid with integrated handle, duck valve & seal. 1 3 RMKIT528 • Duck valve for Lid. 1 4 RMKIT02A • Seal for cap 6". 1 5 RMKIT04 Nylon bearings.
FOR TWO (2) YEARS OF HOME USE, ONE (1) YEAR FOR COMMERCIAL USE AND NINETY (90) DAYS FOR RENTAL USE FROM THE DATE OF ORIGINAL PURCHASE,THE COMPANY, THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL PURCHASER, ANY PART OF PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP.
An important point after buying a device RedMax BM40S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought RedMax BM40S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data RedMax BM40S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, RedMax BM40S you will learn all the available features of the product, as well as information on its operation. The information that you get RedMax BM40S will certainly help you make a decision on the purchase.
If you already are a holder of RedMax BM40S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime RedMax BM40S.
However, one of the most important roles played by the user manual is to help in solving problems with RedMax BM40S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device RedMax BM40S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
