Instruction/ maintenance manual of the product AG2300 RedMax
Go to page of 24
The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. WARNING OWNER / OPERA T OR MANUAL POWER AUGER 3898-93110 (711) AG2300 Thank you for purchasing a RedMax product.
Read this manual carefully to understand all safety precautions, controls, proper operation and maintenance of your RedMax power auger . Failure to do so could result in serious injury .
CONTENTS SAFETY PRECAUTIONS .................................................................................. 4 IN ORDER TO ENSURE PROPER AND SAFE OPERATION OF YOUR POWER AUGER WORK GEAR AND CLOTHING.
■ In order to ensure proper and safe operation of your power auger • Read this Owner/Operator Manual carefully. Be sure you understand how to operate this unit properly before you use it. Failure to do so could result in serious injury. • Be sure to keep this manual handy so that you may refer to it later whenever any questions arise.
Safety Precautions ■ Work gear and clothing • When using your power auger, always be sure to wear strong, durable, work clothing; shirts should be long-sleeved shirts and pants should be full-length pants reaching down to the ankles. • Always be sure to wear and helmet and face protector when using your power auger.
6 Safety Precautions ■ Things to check before using your power auger • Before beginning work, look around carefully to get a feel for the shape of the land, and whether or not there are any obstacles which might get in the way while working, and remove any obstacles which can be cleared away before beginning work.
■ Things to be careful about when using your power auger • When using your power auger, grip the handles of the power auger firmly with both hands, place your feet slightly apart (slightly further.
8 Safety Precautions ■ Notes on care and maintenance of your power auger • In order to maintain your power auger in proper working order, perform the maintenance and checking operations described in this manual at regular intervals.
• Gasoline is very flammable. Avoid smoking or bringing any flame or sparks near fuel. Make sure to stop the engine and allow it cool before refueling the unit. Select outdoor bare ground for fueling and move at least 3m(10ft) away from the fueling stop before starting the engine.
10 Operation • The throttle lock makes starting easier. Always use it when starting the engine. 5. While firmly holding the auger as illustrated, vigorously pull the starter rope. 6. When engine has ignited first, open the choke (move the choke lever backward), pull the starter rope again and the engine will start.
Operation ■ Stopping Engine • Release the throttle lever and press on the red button until the engine comes to a complete stop. ■ Drilling • Keep a firm grip of the auger at all times on a wide stance and by holding the handle with both hands.
12 Maintenance • Before cleaning, inspecting or repairing your unit, make sure that engine has stopped and is cool. Disconnect the spark plug terminal to avoid accidental engine starts. ■ Daily Inspection •R emove grass or dust, from the entire body.
13 Storage ■ Before Long-term Storage • Drain fuel tank and run engine out until all fuel in the carburetor is used up. • Remove the spark plug and drop a spoonful 2 cycle oil into the cylinder. Crank the engine several times and replace the plug.
Model Name AG2300 Engine Displacement cu.in(cc) ........................................................................................1.37 (22.5) Maximum power HP ....................................................................................1.
Parts List NOTE : 1. Use KOMATSU ZENOAH genuine parts as specified in the parts list for repair and/or replacement. 2. KOMATSU ZENOAH does not warrant the machines, which have been damaged by the use of any parts other than those specified by the company.
Parts List : AG2300 16 Fig.1 AUGER DRIVE SHAFT GROUP.
AG2300 Fig.1 AUGER DRIVE SHAFT GROUP Key# Part Number Description Q'ty 1 3890-11101 CASE(A)COMP 1 2 3890-11112 • CASE(A) 1 3 3890-11140 • PIN 2 4 3890-11201 CASE(B)COMP 1 5 06030-06001 BEARIN.
Parts List : AG2300 18 Fig.2 DRILL and ACCESSOR Y GROUP.
AG2300 Fig.2 DRILL and ACCESSOR Y GROUP Key# Part Number Description Q'ty 1 3206-52700 DRILL S20 ASSY 1 2 3206-52710 • DRILL S20 1 3 3200-51130 • PIN 1 4 3200-51140 • CLIP 1 5 3206-52800 DR.
Parts List : AG2300 20 Fig.3 ENGINE GROUP.
AG2300 Fig.3 ENGINE GROUP Key# Part Number Description Q'ty 1 5602-12110 CYLINDER 1 2 5500-12211 GASKET,base 1 3 1850-12130 BOLT 2 4 5500-13162 INSULATOR 1 5 5500-13120 GASKET,insulator 1 6 5500-.
Parts List : AG2300 22 Fig.4 CARBURETOR GROUP.
AG2300 Fig.4 CARBURET OR GROUP Key# Part Number Description Q'ty 1 5501-81000 CARBURETOR ASSY WYJ-113 1 2 1752-81110 • SCREW 2 3 5500-81120 • BRACKET 1 4 1751-81130 • E-RING 1 5 1881-81140 .
KOMA TSU ZENOAH AMERICA INC. 1505 Pavilion Place Suite A Norcross, Georgia 30093 ©P rinted in Japan RedMax ® POWER AUGER MODEL AG2300 2-YEAR LIMITED W ARRANTY For two (2) years [1 year if used commercially] from the date of original purchase of the model AG2300 unit, KOMATSU ZENOAH AMERICA INC.
An important point after buying a device RedMax AG2300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought RedMax AG2300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data RedMax AG2300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, RedMax AG2300 you will learn all the available features of the product, as well as information on its operation. The information that you get RedMax AG2300 will certainly help you make a decision on the purchase.
If you already are a holder of RedMax AG2300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime RedMax AG2300.
However, one of the most important roles played by the user manual is to help in solving problems with RedMax AG2300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device RedMax AG2300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
