Instruction/ maintenance manual of the product ADV350S Recoton/Advent
Go to page of 11
Installation Guide ADV350B / ADV350S / ADV350P DVD PLAYER WITH DROP-DOWN VIDEO MONITOR SOURCE.
Important Notice An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation.
MA TERIALS INCLUDED IN THIS P ACKAGE: 1) ADV350B / ADV350S / ADV350P TV/V ideo Monitor with DVD (P/N 136-3863 / 136-3852 / 136-3853 / 136-3854) (1pc) 2) 12 Pin Power / Signal harness (P/N 1 12-3483) (.
GENERAL INSTALLATION APPROACH: 1) Decide upon system configuration and options that will be installed (i.e.: what components, VCP, Video Game, external amp, wireless headphones, VCP, etc.). 2) Review all manuals to become familiar with electrical requirements and hook ups.
VEHICLE PREPARATION: 1) Locate an accessory power source (+12v when key is in the ACC. and run positions, and 0v when key is off), and also a good ground generally, these wires can be found at the ignition switch or fuse-box.
MINI CONSOLE INSTALLATION: This page only covers special installation considerations for the mini-console installation. If the video monitor is to be installed in a vehicle with the mini console, this console may need to be trimmed to fit the contour of the vehicle headliner.
-5- MOUNTING THE MINI-CONSOLE Roof Roof Support Headliner 12”x9”x3/4” Plywood Block (4) Self-Tapping Screws (not supplied) Mini-Console Video Unit (5) #8 Flat Washers (5) #8x3/4” Self-Tapping .
-6- ADV350 Figure A 1) Make the connections to the vehicle for the 12 pin wiring harness. 2) Insert the Circular Mini-Din Connector of the source component harness through the wire tie loop on the main PCB and into the Mini-Din Connector on the main PCB.
Positive Switched Dome lighting -7- CONNECTING THE DOME LIGHTS The dome lights in the video monitor require three connections to the vehicle's wiring.
Troubleshooting: SYMPTOM : No power at Video Monitor Power but no video or sound Picture, but no sound Static on TV Stations (Tuner Version Only) No Infrared remote func- tions for VCP (or other com- ponents) REMEDY : -Verify +12 VDC on Red wire at 2 pin Power Harness behind video monitor.
© 200 6 ADVENT, 150 Marcus Blvd. Hauppauge, NY 11788 128-7249 B.
An important point after buying a device Recoton/Advent ADV350S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Recoton/Advent ADV350S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Recoton/Advent ADV350S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Recoton/Advent ADV350S you will learn all the available features of the product, as well as information on its operation. The information that you get Recoton/Advent ADV350S will certainly help you make a decision on the purchase.
If you already are a holder of Recoton/Advent ADV350S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Recoton/Advent ADV350S.
However, one of the most important roles played by the user manual is to help in solving problems with Recoton/Advent ADV350S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Recoton/Advent ADV350S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
