Instruction/ maintenance manual of the product 650 Audiovox
Go to page of 6
INSTALLATION INSTRUCTIONS FOR 50 - 0305x - 015 SERIES 1181272 1999 DODGE DURANGO * OVERHEAD CONSOLE for use with FLIPDOWN VIDEO SYSTEM These i nstructions are intended for use only by experienced professionals in the automotive customizing business.
2 MATERIALS PROVIDED FOR INSTALLATION: ITEM Description QTY 1 1 SCREW, # 10 X 1/2" HWH 2 2 SCREW, 6 - 32 X 3/4" PPH 6 3 WASHER, 3.5 mm 4 2 4 SCREW, # 8 X 1 1/2" PWH 1 5 SCREW, # 6 X 1/2.
3 I. PREPARATION OF VEHICLE INTERIOR 1. Remove and retain O.E. dome light by gently prying downward on rear edge of lens then slide frame assembly out. Disconnect wiring and lay dome light in a safe place. See Fig. 1. 2. Using the front edge of dome light opening as a refere nce location, carefully measure & trim headliner as shown.
4 6. Make sure tabs on mounting bracket engage O.E. roof brace and notch aligns with center line. See Figure 4. 7. Construct a jumper h arness that will connect the vehicle’s dome light wires to the lights in video system. Connect the white wire to the O.
5 10. Install and route all video and audio cables, and any other added component requirements to their respective places in the vehicle. Refer to component installation instructions for wiring diagrams. The suggested routing of the video system cable is as follows: Above the headliner from video system to B - pillar.
6 13. Release video screen from locked position. Lower video sc reen to viewing position for access to mounting location in top of video system housing. 14. Raise video system into approximate position and connect all wiring to components. Connect wiring and cabling to video system per instruction included with video system.
An important point after buying a device Audiovox 650 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox 650 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox 650 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox 650 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox 650 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox 650, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox 650.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox 650. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox 650 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
