Instruction/ maintenance manual of the product 5BCR07 Audiovox
Go to page of 8
128-6799C 1 of 8 1 Y our Alarm and or Remote St art unit has a configurable receiver that allows the transmitter to be programmed to operate the Lock Unlock functions with one transmitter button or with two transmitter buttons (separate Lock/ Unlock).
128-6799C 2 of 8 2 programming with the default button configurations for the first four chan- nels will be complete. TO ENTER THE PROGRAM MODE: 1. Turn the ignition switch to the “ON” position. 2. Within 10 seconds, Press and release the valet/program switch three times.
128-6799C 3 of 8 3 10. Within 10 seconds, press and release the valet program switch one time. (Siren emits 5 short chirps indicating channel 5 has been entered) 1 1. Within 10 Seconds, Press and hold any unused button(s) of the first transmitter you wish to control Channel 5 output, (Auxiliary Output 2) until a long chirp is heard from the siren.
128-6799C 4 of 8 4 to use, and all others are erased, you will have to fill all four receiver slots. If in step 3 you identified one transmitter , you will have to fill the additional 3 slots. If in step 3 you identified two transmitters, you will have to fill the additional two slots, etc.
128-6799C 5 of 8 5 To replace the transmitter battery: 1. Slide back the lock tab on the back side of the transmitter case in the direction shown. 2. Slide back the battery case cover in the direction shown. 3. Remove the discharged battery, making note of the location of the + and - contacts shown, and replace with a new type alkaline 1.
128-6799C 6 of 8 6 Attention: T ransmitter Ordering Department Important: T o help us expedite your order , please print all of the information legibly and mail this form and your payment according to the instructions below .
128-6799C 7 of 8 7 THIS P AGE LEFT BLANK INTENTIONALL Y.
128-6799C 8 of 8 8 128-6799C © 2007 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, NY 11788.
An important point after buying a device Audiovox 5BCR07 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox 5BCR07 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox 5BCR07 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox 5BCR07 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox 5BCR07 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox 5BCR07, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox 5BCR07.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox 5BCR07. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox 5BCR07 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
