Instruction/ maintenance manual of the product 5540 Acer
Go to page of 112
Aspire 5540/5560 Series Service Guide PRINTED IN T AIW AN Service guide files and updates are availab le on the ACER/CSD web; for more information, please refer to http://csd.
II Revision History Please refer to the table below for the updates ma de on Aspire 5540/5560 service guide. Date Chapter Up dates 2006/02/17 Chapter 3 and Chapter 6 Add CCD module (camera) information to Chapter 3 and Chapter 6 for Aspire 5560 series.
III Copyright Copyright © 2006 by Acer Incorporated. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any.
IV Conventions The following conventi ons are used in this manual: SCREEN MESSAGES Denotes actual messages that appe ar on screen. NOTE Gives bits and pieces of additional information related to the current topic. W ARNING Alerts you to any damage that might result from doing or not doing specific actions.
V Preface Before using this information and the product it s upports, please read the fo llowing general info rmation. 1. This Service Guide provides you with all techni cal information relating to the BASIC CON FIGURA TION decided for Acer's "glo bal" product offering.
VI.
Chapter 1 1 Features Below is a brief summary of the computer ’s many feature: Platform and memroy T Intel ® Centrino ® Duo mobile technology , featuring: t Intel ® Core TM Duo processor T2300/T2400/T2500/T2600 (2 MB L2 cache, 1 .
2 Chapter 1 T Four easy-launch buttons T T wo front-access switches: WLAN LED and Bluetooth ® LED-swi tches (for selected models) Audio T Intel ® Hig h-Definition audio support T Sound Blaster Pro T.
Chapter 1 3 System Block Diagram Title Size Document Number Rev Date: Sheet of 21F, 88, Sec.1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan, R.O.C. AG1 -1M BLOCK DIAGRAM A3 15 3 Wednesday, January 11, 2006 <Variant Name> Title Size Document Number Rev Date: Sheet of 21F, 88, Sec.
4 Chapter 1 Board Layout Top View 1 SW1 Switch 7 BLUE1 Bluetooth Cable Connector 2 LEDB1 LED Board Cable Connector 8 U39 LAN Connector: RTL8100CL 3 KB1 Keyboard Connector 9 RTC1 RTC Battery Connector .
Chapter 1 5 Bottom View NOTE: This is engineering samp le. The image above may not be exactly the same as the real main board you get. 1 USB2 USB port 13 ODD1 ODD Connector 2 USB3 USB port 14 WIN1 Wir.
6 Chapter 1 Jumper Settings PIN Description Pin1-Pin5 On Clear Password Pin2-Pin6 On NC Pin3-Pin7 On KBC_MA TRIX1 Pin4-Pin8 On KBC_MA TRIX2.
Chapter 1 7 Your Acer Notebook tour After knowing your computer features, let us show you around your new Aspire computer . # Icon Item Description 1 Display screen Also called LCD (liquid-crystal display), displays computer output.
8 Chapter 1 Closed Front View # Icon Item Description 1 Bluetooth ® communication button/ indicator Press to enable/disable Bluetooth function. Lights to indicate the status of Bluetooth- communications (for selected models). 2 Wireless communication button/ indicator Press to enable/disable Wireless function.
Chapter 1 9 Left View # Icon Item Description 1 Kensington lock slot Connects to a Kensington-compatible computer security lock. 2 Optical drive Internal optic al drive; accepts CDs or DVDs. (Some models have slot-in ODD module. The picture displays tray-in ODD module ).
10 Chapter 1 Right View Rear Panel # Icon Item Description 1 Three USB 2.0 ports Connect to USB 2.0 devices (e.g., USB mouse, USB camera). 2 S-video/TV -ou t (NTSC/P AL) port Connects to a television or display device with S-video input (for Aspire 5560).
Chapter 1 11 Bottom Panel Indicators The computer has four easy-to-read status indicators on the upper-right above the keyboard, and four on the front panel. External display (VGA) port Connects to a display device(e.g., external monitor , LCD projector).
12 Chapter 1 The power , battery an d wireless communication status indicators are visible even when th e LCD display is closed. Icon Function Description Cap lock Lights when Cap Lock is activated Num lock Lights when Num Lock is activated. HDD Indicates when the hard disc or optical drive is active.
Chapter 1 13 NOTE: 1. Charging : The light shows amber when the battery is charging. 2. Fu lly charged: The light sho ws green when in AC mode. Easy-Launch Buttons Located above the keyboard are four buttons. These bu ttons are called easy-launch buttons.
14 Chapter 1 T Move your finger across the touchpad (2) to move the cursor . T Press the left (1) and right (4) b uttons locat ed beneath the touchpad to perform selecti on and execution functions. These two buttons are simila r to the left and right buttons on a mouse.
Chapter 1 15 Using the Keyboard The keyboard has full-sized keys and an embedd ed keypad, separate cursor keys, two Windows keys and twelve function keys. Lock Keys and embe dded numeric keypad The keyboard has three lock keys which yo u can toggle on and off.
16 Chapter 1 Hot Keys The computer employs hotkeys or key combinations to access most of the comp uter ’s controls like sreen brightness, volume out put and the BIOS utility . T o activate hot keys, press and hold the < Fn> key before pressing the other key in the hotkey combination.
Chapter 1 17 Special Key Y ou can locate the Euro symbol and US dol lar sign at th e upper-cen ter and/or bottom-right o f your keyboard. To t y p e : The Euro symbol 1. Open a text editor or word processor. Fn-F4 Sleep Puts the computer in Sleep mode.
18 Chapter 1 2. Either directly press the <> symbol at the bottom-right of the keyboard, or hold <Alt Gr> and then press the <5> symbol at the upper-cente r of the keyboard. The US dollar sign 1. Open a text editor or word processor.
Chapter 1 19 Acer Empowering Technology Acer ’s innovative Empowering T echnology makes it ea sy for you to access frequently used functions and manage your new Acer notebook. It f eatures the following handy utilities: T Acer eDataSecurity Management protects data with passwords and advanced encryption algorithms.
20 Chapter 1 easy data encryption/decryption and also supports on-the -fly file encryption for MSN Messager and Micro soft Outlook. There are two passwords that can be used to encrypt/ decrypt a file; the supervisor passowrd and the file- specific password.
Chapter 1 21 Acer eLock Management Acer eLock Management is a secu rity utility that a llows you to lock u p your removable data, optical and floppy drives to ensure that data can’t be st olen while your notebook is unattended.
22 Chapter 1 Acer ePerformance Management Acer ePerformance Management is a system optimizati on tool that boosts the performance of your Acer notebook. It provides you with the following op tions to enhance overall system performance: T Memory optimization - releases u nused memory and check u sage.
Chapter 1 23 Acer eRecovery Management Acer eRecovery Management is a powerf ul utility that d oes away with t he need for re covery disks provided by the manufacturer . The Acer eRecovery Management utility occupi es spac e in a hidden partition on your system’s HDD.
24 Chapter 1 NOTE: If your computer did not come with a Recovery CD or System CD, please use Acer eRecovery Management’s “System backup to optical disk” feat ure to burn a backup imag e to CD or DVD.
Chapter 1 25 Acer eNet Management Acer eNet Management helps you to quickly and eas ily connect to both wired and wireless networks in a variety of locations. T o access this utility , either click o n the “Acer eNet Managemen t” icon on your netebook, or start the program from the S tart menu.
26 Chapter 1 Acer eNet Management can sa ve network settings for a location to a pro file, and automatical ly apply the appropriate profile when you move fromone l ocation to another. Settings stored include network connection settings (IP and DNS settings, wireless AP details , etc.
Chapter 1 27 Battery status For real-time battery life estimates bas ed on current usage, referto the pane l on the l ower left-hand side of the window .
28 Chapter 1 Acer ePresentation Management Acer ePresentation Management lets you select from tw o of the most common projector resol utions: XGA and SVGA.
Chapter 1 29 Hardware Specificatio ns and Configurations NOTE: If you need to check PXE version, press F2 to enter BIOS then enable boot from LAN function. Af ter that, power off the system and remove the HDD. Last, reboot the lapto p. Then you will see PXE version displaying on the sc reen.
30 Chapter 1 NOTE: Above table lists s ome system memory configur ations. Y ou may combine DIMMs with various capacities to form other combinations. On above table, the configuration of slot 1 and slot 2 co uld be reversed.
Chapter 1 31 Bluetooth Inte rface Item S pecification Chipset Built-in ICH7M Data throughput 723 bps (full speed data rate) Protocol Bluetooth 1.1 (Upgradeable to Bluetooth 1.2 wh en SIG specification is ratified). Interface USB 1.1 Connector type USB Wireless Module 802.
32 Chapter 1 Combo Drive Interface Item S pecification V endor & mo del name DVD/CDRW HLDS GCC-4244N Performance S pecification With CD Diskette With DVD Diskett e T ransfer rate (KB/sec) Sust ained: Max 3.
Chapter 1 33 Mono or S ter eo S te reo Resolution 16 bit stereo digital to analog converter 16 bit stereo analog to digital converter Compatibility HD Audio Mixed sound source Line-in, CD V oice chann.
34 Chapter 1 Express Card Interface Item S pecification PCMCIA controller Built-in ICH7M Supports card type 75mmx34mm(W)x5mm Number of slots One Access location Left panel Interface PCI Express System.
Chapter 1 35 Pack capacity 4000 mAH for Sanyo (6cell) 2.0 3920 mAH Sony (6cell) 2.0 3900 mAH Panasonic (6cell) 2.0 4800 mAH Snayo (6cell) 2.4 4800 mAH Sony (6cell) 2.
36 Chapter 1 LCD Inverter Item S pecification V endor & model name Darfon/V189-301GP Brightness conditions N/A Input voltage (V) 9~21 Input current (mA) 2.
Chapter 2 37 BIOS Setup Utility The BIOS Setup Utility is a hardware configuration prog ram built into y our computer ’s BIOS (Basic Input/ Output System). Y our computer is alre ady properly configured and optimi zed, and you do not need to run this utility .
38 Chapter 2 Navigating the BIOS Utility There are six menu options: Info., Main, Sy stem Devices, Security , Boot, and Exit. Follow these instructio ns: T T o choose a menu, use the cursor left/right keys ( zx ). T T o choose a parameter , use the cursor up/down keys ( wy ).
Chapter 2 39 Information NOTE: The system information is su bject to diff erent models. Parameter Description CPU T ype This field shows the CPU type and speed of the system. IDE1 Model Name This field shows the model na me of HDD installed on primary IDE master .
40 Chapter 2 Main The Main screen disp lays a summary of your computer hardware information, and also inclu des basic setup parameters. It allows the user to specif y st andard IBM PC A T system parameters. NOTE: The screen above is for your reference only .
Chapter 2 41 The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. NOTE: The sub-items under each device wil l not be shown if t he device control is set to d isable or auto. This is because the user is not allowed to control the settings in these cases.
42 Chapter 2 Security The Security screen co ntains parameters that help sa feguard and protect your co mpu ter from unauthorized use. PhoenixBIOS Setup Utility Information M a i n Boot Item Specific .
Chapter 2 43 The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. NOTE: When you are prompted to enter a password, you ha ve three tries be fore the system halts. Don’t forget your password.
44 Chapter 2 1. Use the w and y keys to highlight the Set Sup ervisor Password parameter and press the e key . The Set Password box appears: 2. T ype the current p assword in the Enter Current Passwor d field and press e . 3. Press e twice without typing anyth ing in the Enter New Password and Confirm New Password fields.
Chapter 2 45 If the new password and confirm new password strings do not match, the screen will display the following message..
46 Chapter 2 Boot This menu allows the user to deci de the order of boot de vices to load the operatin g system. Bootable devices includes the distette drive in m odule bay , the onboard hard disk drive an d the CD-ROM in module bay .
Chapter 2 47 Exit The Exit screen contains parameters that help safegua rd and protect your computer from unauthorized use. The table below describes the parameters in this screen. Parameter Description Exit Saving Changes Exit System Setup and save yo ur changes to CMOS.
48 Chapter 2 BIOS Flash Utility The BIOS flash memory upd ate is required for th e following conditions: T New versions of system programs T New features or options T Restore a BIOS when it becomes corrupted. Use the Phlash util ity to update the system BIOS flash ROM.
Chapter 3 49 This chapter contains step-by-s tep procedures on how to disass emble the notebook computer for maintenance and troubleshooting . T o disassemble the computer , you need the follow ing to.
50 Chapter 3 General Information Before You Begin Before proceeding with the disassembly procedure, make su re that you do the following: 1. T urn off the power to the system and all peripherals. 2. Unplug the AC adapter and all power and signal cab les from the system.
Chapter 3 51 Disassembly Procedure Flowchart The flowchart on the succeed ing page gives you a graphic represen tation on the entire disassembly sequen ce and instructs you on the components that need to be remo ved during servicing .
52 Chapter 3 Screw List Item Description Part Number A SCW HEX NYL I#R-40/O#4-40 L5.5 34.00015.081 B SCREW MACH WAFER M2*L4 NI 86.00059.220 (PC Card slot x4) C CPU SCREW M2.5*4.3L (2.3 KG) 86.00D01.230 D CPU SCREW M2.5*4.3L (1.55 KG) 86.00D02.230 E SCREW M2.
Chapter 3 53 Removing the Battery Pack 1. Unlock the battery lock. 2. Slide the battery latch then remove the battery ..
54 Chapter 3 Removing the Wireless LAN Card /the HDD Module/the Memory/the ODD Module and the LCD Module Removing the Memory and the HDD Module 1. Remove the five screws fastening the DIMM cover . 2. Detach the DIMM cover carefully . 3. Pop out the memory carefully .
Chapter 3 55 9. Remove the four screws fastening the HDD module. 10. Then detach the HDD module carefully . Removing the ODD Module 1. First, remove the screw fastening the ODD module as shown. 2. Push the ODD module outwa rds then remove it. Removing the LCD Module 1.
56 Chapter 3 3. Remove the middle cover (with launch boar d and micropho ne) from the main unit. 4. Disconnect the microphone cable from the launch bo ard. 5. T ake out the microphone fro m the middle cover . 6. Remove the two screws fastening the launch board.
Chapter 3 57 13. Pull the antenna set from the main uni t. 14. Disconnect the LCD cable. 15. T urn over the notebook then remove two screws fastening the LCD module. 16. Remove two screws fastening the LCD hinges. 17. Then detach the LCD module from the main unit.
58 Chapter 3 Disassembling the Main Unit Separate the Main Unit Into the Upper and the Lower Case Assembly 1. Disconnect the touchpad cable and t he LED FFC from the main board. 2. Remove the 15 screws on the bottom as shown. 3. Detach the upper case assembly from the lower case assembly carefully .
Chapter 3 59 11 . Remove the two screws holding the speaker set. 12. T ake out the speaker set from the lower case. 13. Remove the three screws fastening the system fan. 14. Detach the fan from the lower case. 15. Disconnect the RTC battery cable then detach the RTC battery .
60 Chapter 3 20. Remove the five screws fastening the heatsink. 21. Remove the heatsink from the main board. 22. Use a flat-headed screwdriver to relea se the CPU socket lock. 23. Remove the CPU from the CPU socket carefully . Disassembling the Upper Case Assembly 1.
Chapter 3 61 5. Remove the four screws fastening the touchpad bracket. 6. Remove the touchpad bracket (with touchpad). 7. Detach the touchpad from the touchpad bracke.
62 Chapter 3 Disassembling the LCD Module 1. Remove the four screw caps as shown. 2. Remove the four screws holding the LCD bezel. 3. Then detach the LCD bezel from the LCD module. 4. Remove the two screws fastening the LCD inverter . 5. T ake out the LCD inverter from the LCD cover , then disconnect the LCD cable from the inverter .
Chapter 3 63 13. T ear off the t ape fastening the LCD cable. 14. Disconnect the LCD cable from the LCD. 15. T ear off another t ape holding the LCD cable. 16. Remove the four screws fastening the LCD right bracket. 17. Remove the right bracket from the LCD.
64 Chapter 3 Disassembling the LCD Module (with video camera) 1. Remove the four screw caps as shown. 2. Remove the four screws holding the LCD bezel. 3. Then detach the LCD bezel from the LCD module. 4. Remove the two screws fastening the LCD inverter .
Chapter 3 65 13. T ake out the LCD assembly from the LCD panel. 14. Disconnect the LCD cable from the LCD. 15. T ear off the t ape fastening the LCD cabl e and detach the LCD cable from the LCD. 16. Remove the two screws h olding the wireless a ntenna set to the L CD panel.
66 Chapter 3.
Chapter 3 67 Disassembling the External Modules Disassembling the HDD Module 1. Remove the four screws fastening the HDD bracket. 2. Remove the HDD bracket. Disassembling the ODD Module 1. Remove the two screws holding the ODD fix holder bracket. 2. Then remove the ODD fix holder bracket.
68 Chapter 3.
Chapter 4 69 Use the following procedure as a gui de for computer problems. NOTE: The diagnosti c tests are intended to test only Acer products. Non-Acer products, prototype cards, or modified options can give false e rrors and invalid system responses.
70 Chapter 4 System Check Procedures External Diskette Drive Check Do the following to isolate the problem to a controller, dr iver , or diskette. A write-ena bled, diagnostic diskette is required. NOTE: Make sure that the diskette does not have more than on e label attached to it.
Chapter 4 71 If any of these devices do not work, reconnect the cable connector and rep eat the failing o peration. Memory check Memory errors might stop system operations, show error messages on the screen, or hang the system. 1. Boot from the diagnostics diskette and start the doa gmpstotics prog ram (please refer to mai n board.
72 Chapter 4 Check the Power Adapter Unplug the power adapter cable from the computer and measure the output voltage at the plug of the power adapter cable. See the following figu re 1. If the voltage is not correct , replace the power ad apter . 2. If the voltage is within the range, do the following: T Replace the System board.
Chapter 4 73 Check the Battery Pack T o check the battery pack, do the following: From Software: 1. Check out the Power Management in control Panel 2. In Power Mete r , conf irm that if t he parameters sh own in the screen for Current Power Source and T otal Battery Power Remaining are correct.
74 Chapter 4 Power-On Self-Test (POST) Error Message The POST error message index lists the error message and their possible causes. The most like ly cause is listed first.
Chapter 4 75 Index of Error Messages Error Code List Error Codes Error Messages 006 Equipment Configuration Error Causes: 1. CPU BIOS Update Code Mismatch 2.
76 Chapter 4 Real time clock error RTC battery Run BIOS Setup Utility to reconfigure system time, then reboot system. System board Previous boot incomplete - Default configuration used Run “Load Default Settings” in BIOS Setup Utility .
Chapter 4 77 Error Message List No beep Error Messages FRU/Action in Sequen ce No beep, power-on indicator turns off and LCD is blank. Power source (battery pack and power adapter). See “Power System Check” on page 71.. Ensure every connector is connected tig htly and correctly .
78 Chapter 4 Phoenix BIOS Beep Codes Code Beeps POST Routine Description 02h V erify R eal Mode 03h Disable Non-Maskable Interru pt (NMI) 04h Get CPU type 06h Initialize system hardware 08h Initialize.
Chapter 4 79 46h 2-1-2-3 Check ROM copyright notice 48h Check video configuration against CMOS 49h Initialize PCI bus and devices 4Ah Initialize all video adapters in system 4Bh QuietBoot start (optio.
80 Chapter 4 8Ch Initialize floppy controller 8Fh Determine number of A T A drives (optional) 90h Initialize hard-disk controllers 91h Initialize local-bus hard-disk controllers 92h Jump to UserPatch2.
Chapter 4 81 D2h Unknown interrupt Code Beeps E0h Initialize the chipset E1h Initialize the bridge E2h Initialize the CPU E3h Initialize the system timer E4h Initialize system I/O E5h Check force reco.
82 Chapter 4 Index of Symptom-to-FRU Error Message LCD-Related Symptoms Symptom / Error Action in Sequence LCD backlight doesn't work LCD is too dark LCD brightness cannot be adjusted LCD contrast cannot be adjusted Enter BIOS Utility to execute “Load Setup Default Settings”, the n reboot system.
Chapter 4 83 Battery can’t be charged See “Check the Battery Pack” on page 73. Battery pack System board PCMCIA-Related Symptom s Symptom / Error Action in Sequence System cannot detect the PC Card (PCMCIA) PCMCIA slot assemb ly System board PCMCIA slot pin is damaged.
84 Chapter 4 NOTE: If you cannot find a symptom or an error in this list and the problem remains, see “Undete rmined Problems” on page 86. Battery fuel gauge in Windows doesn’t go hig her than 90%. Remove battery pack and let it cool for 2 hours.
Chapter 4 85 Intermittent Problems Intermittent system hang problems can be caused by a variety of reasons th at have nothing to do with a hardware defect, such as: cosmic radiation, electros tatic discharge, or software errors. FRU replacement should be considered only when a recurring prob lem exists.
86 Chapter 4 Undetermined Problems The diagnostic proble ms does not identify wh ich adapter or device failed, which in stalled devices are incorrect, whether a short circuit is suspected, or whether the system is inoperative. Follow these procedure s to isolate the fail i ng FRU (do not isolate non-defective FRU).
Chapter 5 87 Top View 1 SW1 Switch 7 BLUE1 Bluetooth Cable Connector 2 LEDB1 LED Board Cable Connector 8 U39 LAN Connector: RTL8100CL 3 KB1 Keyboard Connector 9 RTC1 RTC Battery Connector 4 TP AD1 T o.
88 Chapter 5 Bottom View NOTE: This is engineering samp le. The image above may not be exactly the same as the real main board you get. 1 USB2 USB port 13 ODD1 ODD Connector 2 USB3 USB port 14 WIN1 Wi.
Chapter 5 89 Jumper Settings PIN Description Pin1-Pin5 On Clear Password Pin2-Pin6 On NC Pin3-Pin7 On KBC_MA TRIX1 Pin4-Pin8 On KBC_MA TRIX2.
90 Chapter 5.
Chapter 6 91 This chapter gives you the FRU (Field Replaceable Unit) listi ng in global configurations of Aspire 5540/5560. Refer to this chapter whenever ordering for parts to repair or for RMA (Return Merchandise Authorization).
92 Chapter 6 Aspire 5540/5560 Exploded Diagram Aspire 5540/5560 FRU List Category No. Part Name and D escription Acer Part No. Adapter ADAPTER 65W DEL T A SADP-65KB DBE AP .06501.007 ADAPTER 65W LITEON P A-1650- 02WR AP .06503.01 1 ADAPTER 65W LISHIN SLS0335A19A54LF AP .
Chapter 6 93 BLUETOOTH MODULE FOXCONN BCM2045 Note: Th e bluetoot h module do es not contain the black mylar as the image shows. 54.TB2V1.001 Cables MODEM CABLE 50.TB2V1.005 LED CABLE 50.TB2V1.003 TOUCHP AD CABLE 50.TB2V1.001 LAUNCH BOARD CABLE 50.TB2V1.
94 Chapter 6 POWER CORD 2.5A 250V SOUTH AFRICA BK 27.01518.631 POWER CODE 7A 125V JAP AN 2PIN 27.03518.161 Case/Cover/Bracket/Assembly LOWERCASE W/SPEAKER 60.TB2V1.001 S pea ker SPEAKER 23.TB2V1.001 Case/Cover/Bracket/Assembly MIDDLE COVER 60.AA6V1.003 MIDDLE COVER (TM) 60.
Chapter 6 95 TOUCHP AD BRACKET 33.TB2V1.001 UPPER CASE 60.AA6V1.002 UPPER CASE (TM) 60.TB2V1.002 Combo Module COMBO MODULE 24X 6M.TB2V1.001 OPTICAL FIX HOLDER BRACKET 33.TB2V1.002 OPTICAL RAIL HOLDER 33.TB2V1.003 OPTICAL BEZEL GBASE FOR COMBO 42.TB2V1.
96 Chapter 6 CPU DOTHAN740 1.73GMHZ INTEL KC.N0001.740 CPU DOTHAN725A 1.6GMHZ INTEL KC.NA001 .725 CPU CEL-M370 1.5G MHZ INTEL KC.NC001.370 CPU CEL-M380 1.6GMHZ INTEL KC.NV001.380 CPU CEL-M390 1.7GMHZ INTEL KC.NV001.390 CPU CEL-M360 1.4GMHZ INTEL KC.NV001.
Chapter 6 97 ASSY HDD BRACKET AG1 33.TB2V1.004 HDD 40GB SEAGA TE ST94021 12A KH.04001.014 HDD 40GB TOSHIBA MK4025GAS KH.04004.005 HDD 40GB HGST HTS421240H9A T00 KH.04007.013 HDD 40GB WD WD400UE-22HCT0 KH.04008.025 HDD 40GB SAMSUNG M40MP0402H KH.0400B.
98 Chapter 6 CPU HEA TSINK W/SCREW W/O F AN 34.TB2V1.001 CPU HEA TSINK W/O F AN(AD1- DISCRETE) Note: This is for discrete mod els 34.ABA V1.001 Keyboard KEYBOARD 89KEY DARFON NSK- H3M00 SWISS KB.A2707.01 1 KEYBOARD 88KEY DARFON NSK- H30M02 T AIWAN(CHINESE) KB.
Chapter 6 99 KEYBOARD 89KEY DARFON NSK- H3M0S SP KB.A2707.003 KEYBOARD 89KEY DARFON NSK- H3M0T TURKISH KB.A2707.020 KEYBOARD 89KEY DARFON NSK- H3M0U UK KB.A2707.007 KEYBOARD 89KEY DARFON NSK- H3M0W SWEDEN KB.A2707.015 KEYBOARD 89KEY DARFON NSK- H3M1A BELGIUM KB.
100 Chapter 6 KEYBOARD 89KEY DARFON NSK- AEK0W SWEDEN KB.T5007.015 KEYBOARD 89KEY DARFON NSK- AEK1A BELGIUM KB.T5007.014 KEYBOARD 89KEY DARFON NSK- AEK1B BR KB.T5007.005 KEYBOARD DARFON NSK-N7082 US-INTERNA TIONAL KB.T5007.001 KEYBOARD 89KEY DARFON NSK- AEK1F SV KB.
Chapter 6 101 LCD BEZEL 14.1" W/LOGO 60.TB2V1.005 HINGE P ACK LEFT/RIGHT 6K.TB2V1.001 LCD 14.1" WXGA AU B141EW01 V .1 NONE GLARE LK.14105.013 LCD 14" WXGA SAMSUNG L TN141W1-L01 NONE GLARE LK.14106.004 LCD 14.1" WXGA LG LP141WX1- TL02 NONE GLARE LK.
102 Chapter 6 LCD MODULE 14.1" WXGA GLARE W/CCD 6M.ABA V1.032 INVERTER BOARD 15.4" FOXCONN T62I240.00 19.A46V1.003 INVERTER BOARD 15.4" YEC YNV - W02 19.TB2V1.001 WIRELESS ANTENNA LEFT/RIGHT 25.TB2V1.001 LCD BRACKET RIGHT Note: Right bracket is the upper one.
Chapter 6 103 LCD CABLE 14.1" CCD 50.ABA V1.001 CCD CAMERA 1.3M LOGITECH 961458-2000 L 56.ABA V1.001 LCD BEZEL 14.1" CCD W/LOGO 60.ABA V1.006 CCD LA TCH W/SPRING 60.ABA V1.010 CCD BEZEL 60.ABA V1.008 LCD P ANEL 14.1" CCD W/HINGE 60.ABA V1.
104 Chapter 6 MAINBOARD AG1910 W/O CPU W/ PCMCIA SLOT & RTC BA TTER Y MB.TB201.001 Battery RTC BA T TERY 23.TB2V1.004 PCMCIA Slot/PC Card Slot PCMCIA SLOY 22.TB2V1.001 Memory SDIMM 256M INFINEON HYS64T32000HDL-3.7-A KN.25602.023 DIMM 256M NANY A NT256T64UH4A1FN-37B KN.
Chapter 6 105 LCD SCREW RUBBER 47.TB1V1.001 NAME PLA TE 40.AA6V1.001 NAME PLlA TE (TM) 40.T B2V1.001 Screws SCW HEX NYL I#R-40/O#4-40 L5.5 34.00015.081 SCRW MACH W AFER M2. 5*L3 ZN S N 86.00B34.530 SCRW M2*L3 BLACK 86.00C31.220 SCRW M2 X 2 86.00C34.620 SCR M2.
106 Chapter 6.
An important point after buying a device Acer 5540 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Acer 5540 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Acer 5540 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Acer 5540 you will learn all the available features of the product, as well as information on its operation. The information that you get Acer 5540 will certainly help you make a decision on the purchase.
If you already are a holder of Acer 5540, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Acer 5540.
However, one of the most important roles played by the user manual is to help in solving problems with Acer 5540. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Acer 5540 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
