Instruction/ maintenance manual of the product 105BP Audiovox
Go to page of 8
128-8777 1 of 8 1 1 2 1 3 3 *4 *5 BUTTON RECEIVER CHANNEL SYSTEM FUNCTION Lock And Arm Alarm, also initiate and terminates *Panic Unlock And Disarm, also initiates and terminates *Panic. Programmable to unlock drivers door and or all doors. Lock and arm/unlock and disarm.
128-8777 2 of 8 2 PROGRAMMING TRANSMITTERS: NOTE: It is important to remember that during the programming mode, each individual step must be completed within 15 seconds of the previous step. If the 15 second time limit expires between steps, the unit will automatically exit the program mode.
128-8777 3 of 8 3 mounted LED will Flash 3 times, indicating that the unit is ready to accept programming for channel # 3 which is the trunk re- lease/alternate output channel of the system. 8 ) Press and hold the trunk/key symbol button of the t ransmitter you wish t o program for 4 seconds or until a long chirp is heard from the siren.
128-8777 4 of 8 4 NOTE : Channels 6 and 7 can be used as a separate output to control a function other than driver priority . Simply program- ming any unused transmitter button other than the unlock button will allow complete independent control of these outputs.
128-8777 5 of 8 5 and hold until a long chirp is heard. This action forces the unit to erase all stored codes of that transmitter . The unit then exits the program mode the siren emits the program mode exit chirp pattern. All transmitter buttons for that transmitter must now be reprogrammed.
128-8777 6 of 8 6 After removing the three #0 point phillips screws shown pry apart case with the edge of a finger nail or a small common screwdriver . Keep hold of the metal key ring loop to prevent it's loss as it will separate from the transmitter case.
128-8777 7 of 8 7 1)Name: _______________________________________ 2)Address: ______________________________________ 3) City: ________________ S tate: _____ Zip Code: ________ 4) T elephone Number: (_____) _______________ 5) T otal Number Of T ransmitters Required: Cost Per Transmitter is: $75.
128-8777 8 of 8 8 © 2010 Audiovox Electronics Corporation, Hauppauge, NY 11788 128-8777 This Page Intentionally Blank.
An important point after buying a device Audiovox 105BP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox 105BP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox 105BP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox 105BP you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox 105BP will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox 105BP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox 105BP.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox 105BP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox 105BP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
