Instruction/ maintenance manual of the product SWTWO AudioSource
Go to page of 9
PreAmp/Tuner Two Congratulations on your new purchase, and welcome to the AudioSource family of satisfied customers. We trust that you will continue to enjoy the value and quality of your AudioSource PreAmp/Tuner Two.
Remote Sensor Min Max Volume Tuning Power Tuner AM/FM +10 Auto Mono Memory Left Right Balance Min Max Treble Min Max Bass 5 Video 2 1 2 3 4 6 Video 1 Tape 7 CD 8 9 Video 3 Phono Model PreAmp/Tuner Two Stereo PreAmplifier and AM/FM Digital Tuner Auto FM AM 104.
Tape : Press this button to select "Tape" as your input source. The Red LED will indicate your selection. Press this button simultaneously with any other "Input Source" button to a.
Using The Wireless Remote Control Power : Press this button to Turn "ON" the A.C. power to the PreAmp/Tuner Two. Mute : Press this button to "Mute" the volume of the system. All presets will be remembered - including the previous system volume.
All Components plug into the "RCA style" jacks on the rear panel of the PreAmp/Tuner Two. THESE CONNECTIONS ARE PICTURED IN "SET-UP DIAGRAM #1 Audio Connections Phono: Plug the "Line Out" jacks of your turntable into these jacks.
9300 North Decatur Portland, OR 97203 ( 503 ) 286-9300 FAX( 503 ) 978-3302 Printed in Taiwan PreAmp/Tuner Two Specifications Designs and Specifications subject to change without notice 9. Total Harmonic Distortion:----------------------------------------------------------------------------------<0.
3. Remote Sensor Min Max Volume Tuning Power Tuner AM/FM +10 Auto Mono Memory Left Right Balance Min Max Treble Min Max Bass 5 Video 2 1 2 3 4 6 Video 1 Tape 7 CD 8 9 Video 3 Phono Model PreAmp/Tuner Two Stereo PreAmplifier and AM/FM Digital Tuner Auto FM AM 104.
8. Hooking It All Up Set-up Diagram #2 Note: All other connections are identical to "Set-up Diagram #1" Set-up Diagram #1 MODEL PreAmp/Tuner Two L R Phono Tape Rec Tape Mon CD Line Out 2 Vid.
FM "T" Type Antenna - If the PreAmp/Tuner two is to be used in a strong FM signal area, a "T" type antenna (dipole) may provide adequate reception.
An important point after buying a device AudioSource SWTWO (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AudioSource SWTWO yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AudioSource SWTWO - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AudioSource SWTWO you will learn all the available features of the product, as well as information on its operation. The information that you get AudioSource SWTWO will certainly help you make a decision on the purchase.
If you already are a holder of AudioSource SWTWO, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AudioSource SWTWO.
However, one of the most important roles played by the user manual is to help in solving problems with AudioSource SWTWO. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AudioSource SWTWO along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
