Instruction/ maintenance manual of the product Electric Punk Razor
Go to page of 20
Owner ’ s Manual TM TM TM.
2 NOTE: This manual contains many “W arnings” and “Cautions” concerning the consequences of failing to maintain or inspect your bicycle. Because any incident can result in serious injury or even death, we do not repeat the warning of possible serious injury or death each time such a warning is mentioned.
3 1. Part s of the Electric Punk * 4, 5 and 6mm hex (Allen) keys * Bicycle-style tire pump for Schrader valve tires, with pressure gauge * 15mm box wrench (seat adjustment) * 10mm box wrench (belt adjustment) Razor recommends assembly by an adult with experience in bicycle mechanics.
4 2. Proper Fit and Size Adjustment s Fit. When properly adjusted, the rider should be able to sit comfortably and steer with both feet remaining on the foot rests at all times. If the rider has to stretch to reach the foot rests or is too cramped, the seat should be adjusted accordingly .
5 adjusted and maintained on a regular basis. Check or have them checked and adjusted by a qualified mechanic. Worn brake p arts, stretched or frayed inner wires or a kinked housing indicate brake service or part s replacement may be necessary for proper function.
6 NOTE: : The brake cable and trigger switch wire are attached to the controls on the handlebars. Be careful not to deliberately or inadvertently kink or bend these wires during assembly . 4B. Inst all the handlebars and stem. Insert the handlebars into the stem as shown in Figure 3a.
7 4C. Inst all the seatpost Insert the seatpost and seat assembly into the frame as shown in Figure 4a. Note the “minimum insertion” line (arrow in Figure 4a). The post must be inserted until this line is no longer visible. Align the seat square to the frame and flip the quick-release (QR) lever “closed” as shown in Figures 4b and 4c.
8 4D. Adjust and tighten the handlebars With the seat installed and tightened, sit on the Electric Punk and, with the stem QR open, adjust the handlebar square to the front wheel (remember , the stem must also be square to the front wheel). When the handlebar position is satisfactory , push the QR lever (Figure 5a) until it is closed (Figure 5b).
9 NOTE: Although we make every effort to keep our manual up-to- date, if your Electric Punk does not look exactly this, then we’ve made improvements since this document was printed. Check out the Razor website: www .razor .com for technical updates on the latest service and adjustment procedures.
10 4F . Adjusting the seat . If you desire to change the seat tilt (Figure 7), or adjust the fore and aft position of the seat on the seat rails, this can be accomplished by loosening one side of the “seat guts” using a 15mm box wrench. Adjust the tilt as desired and retighten securely .
11 off the ground two or three inches and let go so it can bounce on the ground. Does everything sound tight? There should not be any unusual rattles or sounds from loose part s or broken components. If you are not sure, ask an experienced mechanic to check.
12 6. Maintenance and Rep airs 6A. Brake cable adjustment. The main adjustment on the brake is to take up the cable slack and bring the lever into adjustment. This is typically accomplished with the adjusting barrel at the brake lever as shown in Figure 9a.
13 NOTE: The brake system requires a break-in period. Y ou may have to repeat procedure 6F often during the first several hours of use. Repeat as necessary from thereafter to maint ain proper brake function. 6B. Brake lever reach adjustment. The Electric Punk is supplied with a brake lever that adjusts to accommodate a variety of hand sizes.
14 Figur e 10a. Figur e 10b. If the belt requires tensioning, loosen the two screws and the locknut (A in Figure 10b) and turn the adjusting screw (B in Figure 10b) in 1/8 to 1/4 turn increments until the desired tension is att ained.
to separate the two halves and to remove and rep air or replace the tube and/or tire. 6) T o reassemble, reverse the order of disassembly . Figur e 1 1c.
6E. Rear Suspension. The rear suspension allows for adjustment of the spring preload. For heavier riders, tighten the adjusting ring clockwise. For lighter riders, loosen the adjusting ring counter-clockwise (see Figure 12). Figur e 12 7. Safety Helmet s.
17 required and are not standard equipment on the Electric Punk. W e do not recommend riding at night or in low-light conditions. Wet weather riding. Do not ride in wet weather . W ARNING: Keep your fingers and other body parts away from the drive belt, steering system, wheels and all other moving components.
T urning without warning. Children are of ten struck from behind because they made unexpected turns into traffic, or they inadvertently veered into traffic when looking over their shoulder . Observe the following safety tips for lef t turns: Do not cut across the street, cross only at intersections.
8. Razor Limited W arranty and Registration The manufacturer warranties this product to be free of manufacturing defects for a period of 90 days from date of purchase.
razor usa llc cerritos, ca 90703 www .razor .com QUESTIONS? Please read the owner ’s manual thoroughly . If you still have questions, check our website for updates and contact information. S pare tires, tubes and batteries are available! Keep your Electric Punk running for years with these and other genuine Razor part s.
An important point after buying a device Razor Electric Punk (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Razor Electric Punk yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Razor Electric Punk - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Razor Electric Punk you will learn all the available features of the product, as well as information on its operation. The information that you get Razor Electric Punk will certainly help you make a decision on the purchase.
If you already are a holder of Razor Electric Punk, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Razor Electric Punk.
However, one of the most important roles played by the user manual is to help in solving problems with Razor Electric Punk. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Razor Electric Punk along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
