Instruction/ maintenance manual of the product E200s Razor
Go to page of 22
OW N ER ’ S M AN U A L Item Numbers E100 13100E-BL E125 13125E-BK Black 13111110 Red E200 13200E-SL E200S 13201S-SL E225S 13112850 E300 13300E-SL E300S 13301S-SL E325S 13116390 Read and underst and this entire manual before riding ! DO NOT RETURN TO STORE! NOTE : E1 00/125 must be tr aveling 3mph before motor will engage.
WARNING : Riding the E100, E200 or E300 scooter can be a hazardous activity . Certain conditions may cause the equipment to fail without fault of the manufacturer .
Charger Charger Plug Charger Port Remove contents from box. Remove the foam separators that protect the components from damage during shipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during shipping.
3 ASSEMBL Y AND SET -UP ❑ Attaching the Handleba rs W ARNING: Failure to properly tighten the wedge may allow the handlebars to dislodge while riding and may cause you to lose control and fall. When correctly tightened, the handlebars will not rotate out of alignment with the front wheel under normal circumstances.
❑ Adjusting the Handleb ar Height ❑ Riding Y our Scooter T esting the Brakes – T o use the brakes, squeeze the front and back brake levers to increase the pressure on the brake. The brake lever is fi tted with a cable adjuster to compensate for cable stretch and/or to fi ne-tune the lever movement to brake engagement.
5 REP AIR AND MA INTENANCE 1 Use the special valve extender/adapter supplied. The valve adap ter is located in the bag with the owners manual supplied at the time of purchase. 2 Align the access hole in the drive sprocket with the tire valve. Thread the adapter completely onto the valve and attach the pump.
6 REP AIR AND MA INTENANCE ❑ Adjusting the Chain Tools required: 10 mm wrench, two (2) 8 mm wrenches , and two (2) 1 7 mm wrenches . 1 U sing two 17mm wrenches, l oosen the rear axle bolts by turning the wrenches counter clockwise.
7 REP AIR AND MA INTENANCE ❑ Chain and R ear T ire Replacement Tools required: Phillips screwdriver , 10 mm wrench, two (2) 8 mm wrench es , and two (2) 1 7 mm wrenches . 1 W ith a Phillips screwdr iver , l oosen the two screws and remove the chain guard.
8 REP AIR AND MA INTENANCE 10 Install the axle adjusters and axle nuts. T ighten until they just barely hold the hardware in place. 11 T ighten both axle adjust- ers the same number of turns to fi ne-tune the tension on the chain and to approximately maintain the centering of the wheel.
9 REP AIR AND MA INTENANCE 1 (E100 Only) Loosen the brake pad bolt and remove one brake pad. ❑ Front T ire Replacement Tools required: 10 mm wrench, two (2) 1 7 mm wrenches and a fl athead screwdriver . 2 U sing two 17mm wrenches, l oosen the front axle bolts by turning the wrenches counter clockwise.
10 ❑ Battery Care and Disp osal Do not store the battery in temperatures above 75° or below -10° F . CONT AINS SEALED LEAD BA TTERY . BA TTERY M UST B E RECYCLED. Disposal: Y our Razor product uses sealed lead-acid batteries which must be recycled or disposed of in an environmentally sound manner .
11 TROUBLES HOOTING GUIDE Scooter does not run Scooter was running but suddenly stopped Short run time (less than 30 minutes per charge) Scooter runs sluggishly Problem Possible Cause Solution Undercharged battery Charger is not working Loose wires or connectors E100 only only - Scooter must be trav eling 3mph before motor will engage.
12 TROUBLES HOOTING GUIDE Need Help? Need Help? Need Help? V V V isit isit isit our web sit e our web sit e our web sit e for updates and a list of authori zed service centers for updates and a list of authori zed service centers for updates and a list of authori zed service centers at at at www .
Keep your scooter running for years with genuine Razor parts. Visit our web site or e-mail us for more information on spare part availability . (Specifi cations subject to change without notice.
E100 P ARTS 14 E_Series_Manualv10.indd 15 3/10/06 2:11:12 PM.
Keep your scooter running for years with genuine Razor parts. Visit our web site or e-mail us for more information on spare part availability . (Specifi cations subject to change without notice.
E200 P ARTS 1 6 E_Series_Manualv10.indd 17 3/10/06 2:11:13 PM.
Keep your scooter running for years with genuine Razor parts. Visit our web site or e-mail us for more information on spare part availability . (Specifi cations subject to change without notice.
E300 P ARTS 1 8 E_Series_Manualv10.indd 19 3/10/06 2:11:14 PM.
SB 1918 (CALIFORNIA) DECLARA TION YOUR INSURANCE POLICIES MA Y NOT PROVIDE COVERAGE FOR ACCIDENTS INVOL VING THE USE OF THIS SCOOTER/ELECTRIC VEHICLE. TO DETERMINE IF COVERAGE IS PROVIDED, YOU SHOULD CONT ACT YOUR INSURANCE COMP ANY OR AGENT . 1 9 E_Series_Manualv10.
E_Series_Manualv10.indd 21 3/10/06 2:11:14 PM.
T ire Infl ation Periodically inspect the tires for excess wear , and regularly check the t ire pressure and re- infl ate as necessary . If you get a fl at tire, the inner tube can be patched or a new tube can be purchased from Razor or an authorized repair center .
An important point after buying a device Razor E200s (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Razor E200s yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Razor E200s - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Razor E200s you will learn all the available features of the product, as well as information on its operation. The information that you get Razor E200s will certainly help you make a decision on the purchase.
If you already are a holder of Razor E200s, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Razor E200s.
However, one of the most important roles played by the user manual is to help in solving problems with Razor E200s. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Razor E200s along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
