Instruction/ maintenance manual of the product E32002 Raymarine
Go to page of 13
Distributed by Any reference to Raytheon or RTN in this manual should be interpreted as Raymarine. The names Raytheon and RTN are owned by the Raytheon Company.
Raystar 112LP GPS T ransducer Installation Guide Cov ers: E32001 SeaT alk V er sion E32002 NMEA V ersion.
Raystar 112LP GPS Transducer Installation IMPOR T ANT NO TICE This device is only an aid to navigation. Its accuracy can be affected by many factors, including equipment failure or defects, environmen- tal conditions and improper handling or use.
Raystar 112LP GPS Transducer Installation Summary of F eatur es Receiver type: 12 Parallel channels Frequency: 1575.42 MHz +/- 1 MHz (C/A code), L1 Sensitivity: -130dBm Signal acquisition: Automatic Time to first fix: 15 minutes maximum, typically 2 minutes Position accuracy: 15m RMS.
Raystar 112LP GPS Transducer Installation This page left intentionally blank.
Raystar 112LP GPS Transducer Installation Raytheon Raystar 112LP GPS Receiv er This booklet covers two models of the Raystar 112LP SeaTalk Version Part No. E32001 NMEA Version Part No. E32002 Before commencing installation ensure you have the correct unit for your application.
Raystar 112LP GPS Transducer Installation Surface Mounting 1. Select a suitable area which allows access to the underside of the mounting surface for fixing and, using the template supplied in this document, carefully drill the two 6mm (0.25in) fixing holes marked.
Raystar 112LP GPS Transducer Installation P ole/Rail Mounting 1. Screw the pole mount base to a suitable pole or rail mount bracket which has an industry standard 1” 14TPI thread until secure.
Raystar 112LP GPS Transducer Installation Connections NMEA V ersion Connection is made via a 10m (33ft) cable terminated with a moulded 6 pin connector.
Raystar 112LP GPS Transducer Installation Raytheon Raystar 112LP GPS Receiv er Mounting T emplate Cable Exit Channel 18mm (0.7in) 6mm (0.25") dia. for cable only 19mm (0.75") dia. for NMEA plug 6mm (0.25") dia. 2 positions 18mm (0.7in) 36mm (1.
Raystar 112LP GPS Transducer Installation This page left intentionally blank.
Raystar 112LP GPS Transducer Installation EMC Installation & Service Guidelines All Raytheon equipment and accessories are designed to the best industry standards for use in the leisure marine environment.
Raytheon Marine Company 676 Island P ond Road Manchester , NH 03109-5420 USA TEL (603) 647-7530 F AX (603) 634-4756 http://www .raymarine.com Raytheon Marine Eur ope Ltd.
An important point after buying a device Raymarine E32002 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Raymarine E32002 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Raymarine E32002 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Raymarine E32002 you will learn all the available features of the product, as well as information on its operation. The information that you get Raymarine E32002 will certainly help you make a decision on the purchase.
If you already are a holder of Raymarine E32002, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Raymarine E32002.
However, one of the most important roles played by the user manual is to help in solving problems with Raymarine E32002. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Raymarine E32002 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
