Instruction/ maintenance manual of the product 1700 Series Raritan
Go to page of 8
WARNING: Raritan Engineering Company, Inc. recommends that a qualified person or electrician install this product. Equipment damage, injury to personnel or death could result from improper installation.
2 Incorporate this inspection into commissioning procedure in spring and winterizing procedure in fall. A removable magnesium Anode is integral with the hot water discharge fitting. The Anode should be checked at least once a year by removing it from the water heater.
3 6. Close drain valve or reconnect plumbing to cold water supply for the water heater. 7. See "Start Up" procedure before turning on power. WINTERIZING Before beginning winterizing, be sure the power is turned off to the water heater.
4 2. Install a “tee” in the cold water supply line. 3. From the “tee” run a line to the heater, this line MUST have a vacuum relief valve (such as Watts Model N36) installed to prevent back siphoning which could cause the tank to empty and element to burn out (see Fig.
5 TROUBLESHOOTING WARNING: If temperature and safety valve is leaking it must be replaced. Visual aid reference at www.raritaneng.com/tech support/repair shop PROBLEM CAUSE CORRECTION A. Water does not get hot. B . Relief valve opens and re- leases hot wa- ter.
6 3/4"(1.9cm) Marine Plywood 24" (61cm) Cut along this line to make 2 side pieces 20 3/4" (52.7cm) 20 3/4" (52.7cm) 8" (20.3cm) 1" (2.
7 HEAT EXCHANGER The following information is only a general guideline and any installation is made at the risk of the installer. No responsibility to Raritan Engineering Company, Inc.
8 530 Orange Street, P.O. Box 1157, Millville, NJ 08332 USA Telephone: 856-825-4900 FAX: 856-825-4409 www.raritaneng.com Southern Office and Plant: 3101 SW Second Avenue, Fort Lauderdale, FL 33315 USA Telephone: 954-525-0378 FAX: 954-764-4370 Specifications subject to change without notice.
An important point after buying a device Raritan 1700 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Raritan 1700 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Raritan 1700 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Raritan 1700 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Raritan 1700 Series will certainly help you make a decision on the purchase.
If you already are a holder of Raritan 1700 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Raritan 1700 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Raritan 1700 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Raritan 1700 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
