Instruction/ maintenance manual of the product AMP110 AudioSource
Go to page of 16
OWNER’S MANUAL AMP102 / AMP110 Congratulations on your purchase of the AudioSource® AMP102/110. Please take a few moments to read this entire manual, and be sure to retain this document for future reference. Please r ead and observe all safety instructions detailed on page 2.
AMP102 / AMP110 OWNER’S MANUAL 13970 SW 72nd Ave. Portland, OR 97223 • 503.914.4688 • www.audiosource.net 2 • TO PREVENT FIRE OF SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTICLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULL Y INSERTED TO PREVENT BLADE EXPOSURE.
AMP102 / AMP110 OWNER’S MANUAL 13970 SW 72nd Ave. Portland, OR 97223 • 503.914.4688 • www.audiosource.net 3 T echnical Support If any part of this product is damaged or missing, please call your dealer or AudioSource® dir ectly at toll free 1.877.
Power Signal / Clip Left Signal / Clip Right Left Right Balance V olume Speakers A B AMP102 Stereo Power Amplifier AMP102 / AMP110 OWNER’S MANUAL 13970 SW 72nd Ave. Portland, OR 97223 • 503.914.4688 • www.audiosource.net 4 1. Power The front panel power switch switches the AMP102/110 on or off.
AMP102 / AMP110 OWNER’S MANUAL 13970 SW 72nd Ave. Portland, OR 97223 • 503.914.4688 • www.audiosource.net 5 FRONT P ANEL CONTROLS The front panel power switch switches the AMP102/110 on or of f. Red LEDs behind the power button lens indicate power status.
AMP102 / AMP110 OWNER’S MANUAL 13970 SW 72nd Ave. Portland, OR 97223 • 503.914.4688 • www.audiosource.net 6 MODE SWITCH T o the right of the Master Level controls is a switch labeled “Mode” with “Stereo” and “Bridged” as options.
AMP102 / AMP110 OWNER’S MANUAL 13970 SW 72nd Ave. Portland, OR 97223 • 503.914.4688 • www.audiosource.net 7 APPLICA TIONS NOTE: It should be noted that the AMP102/110 is rated to operate into a minimum 8-ohm bridged load.
AMP102 / AMP110 GUIDE DE L’UTILISATEUR 13970 SW 72nd Ave. Portland, OR 97223 • 503.914.4688 • www.audiosource.net 8 AMP102 / AMP110 Amplificateur de puissance audio multi-zones pour la maison CA.
AMP102 / AMP110 GUIDE DE L’UTILISATEUR 13970 SW 72nd Ave. Portland, OR 97223 • 503.914.4688 • www.audiosource.net 9 14 CONTRÔLES DU P ANNEAU A V ANT L ’interrupteur d’alimentation du panneau avant allume ou éteint le AMP102/1 10.
AMP102 / AMP110 GUIDE DE L’UTILISATEUR 13970 SW 72nd Ave. Portland, OR 97223 • 503.914.4688 • www.audiosource.net 10 11 ENTRÉE/SORTIE RCA Il existe 2 paires d’entrées RCA à l'arrière du panneau de l'AMP102/1 10. Ces entrées RCA sont étiquetées «Ligne 1 IN» et «Ligne 2 IN».
AMP102 / AMP110 GUIDE DE L’UTILISATEUR 13970 SW 72nd Ave. Portland, OR 97223 • 503.914.4688 • www.audiosource.net 11 CONFIGURATION POUR SOURCES MULTIPLES Dans l’application présentée à la Figure 10, un système audio réparti est connecté à l’AMP102/1 10 en tant qu’amplificateur de zone locale via les entrée de la Ligne 2.
AMP102 / AMP110 MANUAL DEL PROPIETARIO 13970 SW 72nd Ave. Portland, OR 97223 • 503.914.4688 • www.audiosource.net 12 AMP102 / AMP110 Amplificador Hogareño de Audio de Energía Multi-Zona CARACTER.
AMP102 / AMP110 MANUAL DEL PROPIETARIO 13970 SW 72nd Ave. Portland, OR 97223 • 503.914.4688 • www.audiosource.net 13 10 CONTROLES DEL P ANEL FRONT AL El interruptor de energía del panel frontal enciende o apaga el AMP102/1 10. Lámparas LED rojas detrás de las lentes del botón de encendido indican el estado de energía.
AMP102 / AMP110 MANUAL DEL PROPIETARIO 13970 SW 72nd Ave. Portland, OR 97223 • 503.914.4688 • www.audiosource.net 14 11 ENTRADA/SALIDA RCA Existen 2 pares de entrada RCA en el panel trasero del AMP102/1 10. Estas entradas RCA están marcadas como "Línea 1 IN” y "Línea 2 IN”.
AMP102 / AMP110 MANUAL DEL PROPIETARIO 13970 SW 72nd Ave. Portland, OR 97223 • 503.914.4688 • www.audiosource.net 15 CONFIGURACIÓN PARA FUENTES MÚLTIPLES En la aplicación mostrada en la Figura 12, un sistema de audio distribuido está conectado al AMP102/110 como amplificador de zona local a través de entradas de Línea 2.
AMP102 SPECIFICA TIONS Stereo (8 ohm): 50W RMS per channel at 8 ohms, 20Hz - 20kHz, <0.1% THD+N Stereo (4 ohm): 75W per channel at 4 ohms, 20Hz-20kHz, <1% THD+N Bridged Mono (8 ohm): 150W RMS at 8 ohms, 20Hz - 20kHz, <0.
An important point after buying a device AudioSource AMP110 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AudioSource AMP110 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AudioSource AMP110 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AudioSource AMP110 you will learn all the available features of the product, as well as information on its operation. The information that you get AudioSource AMP110 will certainly help you make a decision on the purchase.
If you already are a holder of AudioSource AMP110, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AudioSource AMP110.
However, one of the most important roles played by the user manual is to help in solving problems with AudioSource AMP110. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AudioSource AMP110 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
